CP1E-N20DR-A Omron, CP1E-N20DR-A Datasheet - Page 33

no-image

CP1E-N20DR-A

Manufacturer Part Number
CP1E-N20DR-A
Description
12In,8Out AC PS RS232 NonUL
Manufacturer
Omron
Datasheet

Specifications of CP1E-N20DR-A

Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Connecting to Support Software
Operating Environment and System Configuration
The following system is required to operate the CX-Programmer. Make sure your system provides the following conditions and has the necessary
components.
Connecting Methods
Using commercially available USB cable, connect the CX-Programmer to the peripheral USB port on the CPU Unit.
Host link connection can be made with RS-232C port to connect the Programming Device (CX-Programmer).
Commercially available
USB cable
Connecting Cable
Use the following cable to connect the CP1E CPU Unit to the computer running the Support Software.
USB port
RS-232C Port for N/NA-type CPU Units
Note: Connectable with CX-Programmer Ver.9.1 or higher only.
* Use the USB-Serial Conversion Cable CS1W-CIF31 together to connect a PLC to a personal computer's USB port.
Supported computer
CD-ROM or DVD-ROM drive
Supported Operating Systems
CPU
RAM
Available hard disk space
Display
PLC and connection port
Peripheral USB port
(Conforming to USB 2.0, B connector)
RS-232C Port or
CP1W-CIF01
(Add this to the option board slot.)
A connector
Item
Port at Unit
Port at Unit
CX-Programmer
Peripheral USB port
(Conforming to USB 2.0, B connector)
B connector
IBM PC/AT or equivalent
One or more
Windows 2000 (Service Pack 4 or higher), XP, Vista, or 7
(except 64-bit edition)
Pentium II 333 MHz or faster
256 MB min. 512 MB or more recommended
600 MB min.
800 x 600 SVGA min.
USB port, RS-232C port, RS-422A/485 port or Ethernet port
USB port
RS-232C port *
Port at computer
Port at computer
USB port
CP1E CPU Unit
Description
Host Link
(SYSWAY)
(communications mode)
Communications mode
CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@
USB 2.0 (or 1.1)
Network type
Commercially available USB cable
(A connector - B connector)
XW2Z-200S-CV
XW2Z-500S-CV
XW2Z-200S-V
XW2Z-500S-V
Model
Model numbers
Connecting Cable
Length
2m
5m
2m
5m
With anti-static
connectors
With anti-static
connectors
Less than 5 m
Remarks
Length
---
---
33

Related parts for CP1E-N20DR-A