CP1E-N40DT1-D Omron, CP1E-N40DT1-D Datasheet

no-image

CP1E-N40DT1-D

Manufacturer Part Number
CP1E-N40DT1-D
Description
24In,16PNP DC PS RS232 NonUL
Manufacturer
Omron
Datasheet

Specifications of CP1E-N40DT1-D

Lead Free Status / Rohs Status
Lead free / RoHS Compliant
The CP1E Package PLCs: Economical, Easy to use, and Efficient
Features
■The E-type Basic CPU Units provide cost
■The N and NA-types Application CPU Units support
• Programming, setting, and monitoring with CX-Programmer.
• Easy connection with computers using commercially available USB cables
• With E30/40, N30/40/60 or NA20 CPU Units, Add I/O by Connecting Expansion I/O Units.
• With E30/40, N30/40/60 or NA20 CPU Units, Add Analog I/O or Temperature Inputs by Connecting Expansion Units.
• Quick-response inputs
• Input interrupts
• Complete High-speed Counter Functionality.
• Versatile pulse control for Transistor Output for N14/20/30/40/60 or NA20 CPU Units.
• PWM Outputs for Transistor Output for N14/20/30/40/60 or NA20 CPU Units.
• Built-in RS-232C Port for N/NA-type CPU Units.
• Mounting Serial Option Boards or Ethernet Option Board to N30/40/60 or NA20 CPU Units.
• Built-in analog I/O, two inputs and one output, for NA-type CPU Units.
SYSMAC CP-series CP1E CPU Units
CP1E-E@@D@-@
CP1E-N@@D@-@/NA20D@-@
performance and easy application with only basic
functionality.
Programmable Terminal connection, position control,
and inverter connection
New Product
CP1E-E20DR-A
CP1E-N40DR-A
1

Related parts for CP1E-N40DT1-D

CP1E-N40DT1-D Summary of contents

Page 1

... New Product SYSMAC CP-series CP1E CPU Units CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ The CP1E Package PLCs: Economical, Easy to use, and Efficient ■The E-type Basic CPU Units provide cost performance and easy application with only basic functionality. ■The N and NA-types Application CPU Units support ...

Page 2

... Analog inputs Analog outputs Temperature sensors *The CP1W-DAM01 LCD Option Board can not be used. RS-422A/485 Option Board Ethernet Option Board Or CP1W-CIF11 CP1W-CIF41 CP1E PLCs are supported by CP1W-CIF12 CP1W-CIF41 version 2.0 or higher. IP ADDRESS: COMM SUBNET MASK: COMM ERR 10BASE-T 100BASE-TX Expansion Units and ...

Page 3

... Relay VAC E-type CPU Units with 40 I/O Points 100 to 240 24 16 Relay VAC Note: There are no accessories included with E-type CP1E CPU Units. A Battery (CP1W-BAT01) cannot be used. CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ External consumption (A) power supply Data Output Program (24 VDC) memory type capacity ...

Page 4

... CP1E-N30DT1-D 0.21 0.09 CP1E-N40DR-A 0.31 0.02 CP1E-N40DT-A 0.31 0.02 CP1E-N40DT1-A 0.21 0.09 CP1E-N40DR-D 0.31 0.02 CP1E-N40DT-D 0.31 0.02 CP1E-N40DT1-D 0.21 0.13 CP1E-N60DR-A 0.31 0.02 CP1E-N60DT-A 0.31 0.02 CP1E-N60DT1-A 0.21 0.13 CP1E-N60DR-D 0.31 0.02 CP1E-N60DT-D 0.31 0.02 CP1E-N60DT1-D Standards UC1, N, ...

Page 5

... Counter Present Values (C), Auxiliary Area (A), and Clock Function (Use batteries within two years of manufacture.) Note: There are no accessories included with N/NA-type CP1E CPU Units. RS-232C connectors for the built-in RS-232C port and the Battery (CP1W-BAT01) are not included. CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ ...

Page 6

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Options (for CP1E N30/40/60 or NA20 CPU Units) The Options cannot be used for CP1E N14/20 CPU Units and all E-type CPU Units. Product name RS-232C Option Board One RS-232C Option Board can be mounted to the Option Board slot. For CP1E N30/40/60 or NA20 CPU Units only. ...

Page 7

... Expansion I/O Units and Expansion Units (for CP1E E30/40, N30/40/60, or NA20 CPU Units) CP1E E10/14/20 or N14/20 CPU Units do not support Expansion I/O Units and Expansion Units. Unit type Product name Inputs Input Unit 8 Output Units -- -- CP1W Expansion I/O Units -- I/O Units ...

Page 8

... Mounted in a panel CPU Unit with 10 I/O points (CP1E-E10D@-@): 90mm *1 ×85mm *2 × CPU Unit with I/O points (CP1E-@14D@-@/@20D@-@): 90mm *1 × 85mm *2 × CPU Unit with 30 I/O points (CP1E-@30D@-@): 90mm *1 × 85mm *2 × 130 mm CPU Unit with 40 I/O points (CP1E-@40D@-@): 90mm *1 × 85mm *2 × 150 mm CPU Unit with 60 I/O points (CP1E-N60D@-@): 90mm *1 × ...

Page 9

... CP1E-@30D@-@/@40D@-@/N60D@-@/NA20D@-@: 3 units CP1E-E10D@-@ : 10 CP1E-@14D@-@ : 14 CP1E-@20D@-@ : 20 CP1E-@30D@-@ : 150 (30 built in, 40 × 3 expansion) CP1E-@40D@-@ : 160 (40 built in, 40 × 3 expansion) CP1E-N60D@-@ : 180 (60 built in, 40 × 3 expansion) CP1E-NA20D@-@: 140 (20 built in, 40 × 3 expansion) CP1E-E10D@-@ : 10 (6 inputs, 4 outputs) CP1E-@14D@-@ : 14 (8 inputs, 6 outputs) ...

Page 10

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Item B-type Peripheral USB Port Transmission distance Built-in RS-232C port Communications method synchronization Baud rate Transmission distance Supported protocol Communications Serial Option port Mountable Option Boards Communications method synchronization Baud rate Compatible protocols Number of tasks Maximum subroutine number ...

Page 11

... Modbus-RTU Easy Master function Scheduled interrupts Interrupt inputs Interrupt High-speed counter interrupts CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Function description Makes the cycle time consistent. Monitors the cycle time. High-speed pulses from devices such as a rotary encoder are counted. The counted values are stored in the Auxiliary Area. ...

Page 12

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Function Memory protection Power supply management Number of power interruptions counter Online editing Force-set/reset Differentiate monitoring Debugging Storing the stop position at errors Program check Error Log CPU error detection User-defined failure diagnosis Load OFF function System FAL error detection ...

Page 13

... DM Area If a CP1W-BAT01 Battery (sold separately) is mounted to an N/NA-type CPU Unit, which is normally backed built-in capacitor, data will be backed up by the battery. CP1E E-type CPU Unit CP1E N/NA-type CPU Unit 9 hours 7 hours 25 40 Ambient temperature Area where data is backed up even if the power supply is ...

Page 14

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ I/O Memory Areas Data can be read and written to I/O memory from the ladder programs. I/O memory consists of an area for I/O with external devices, user areas, and system areas. Work Area (W) Holding Area (H) I/O Memory Areas Name Input Bits ...

Page 15

... DM backup words and the data is called the DM backup data.) A751.15 (DM Backup Save Start Bit) can be used in any operating mode (RUN, MONITOR, or PROGRAM mode). Words That Can Be Backed Up • E-type CP1E CPU Units D1499 • N/NA-type CP1E CPU Units D6999 Number of Words To Back Up The number of words to back up starting from D0 is set in the Number for backup Box in the Startup Data Read Area in the PLC Setup ...

Page 16

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Built-in Inputs Terminal Arrangements ●Input Terminal Arrangement for CPU Unit with 10 I/O Points AC power supply models CIO 0 L1 L2/N COM power supply models CIO 0 + − COM ●Input Terminal Arrangement for CPU Unit with 14 I/O Points AC power supply models ...

Page 17

... CIO 0 L1 L2/N COM power supply models CIO 0 + − COM ●Input Terminal Arrangement for CPU Unit with 20 I/O Points and Built-in Analog AC power supply models CIO 0 L1 L2/N COM power supply models CIO COM CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ CIO CIO CIO CIO ...

Page 18

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Allocating Built-in Inputs to Functions Input terminals are allocated functions by setting parameters in the PLC Setup. Set the PLC Setup so that each terminal is used for only one function. Input terminal block CPU Unit with Normal I/O Points Terminal Terminal block ...

Page 19

... Terminal Arrangement for CPU Unit with 20 I/O Points and Built-in Analog AC power supply model + − COM COM COM 03 COM 06 CIO 100 CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ ●Output Terminal Arrangement for CPU Unit with 14 I/O Points AC power supply model DC power supply model 00 01 COM COM NC COM CIO 100 07 DC power supply model ...

Page 20

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Allocating Built-in Output Terminals to Functions Output terminals are allocated functions by setting parameters in the PLC Setup. Set the PLC Setup so that each terminal is used for only one function. Output terminal block CPU Unit with I/O points Terminal Terminal block label ...

Page 21

... ON 90% 50% OFF 10% 50 μs 50 μs min. min. CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Specification High-speed counter inputs, interrupt input, quick-response inputs, or Normal Inputs CIO 0.02 to CIO 0.07 *1 3.3 kΩ 7.5 mA typical 3 mA min. at 17.0 VDC min max. at 5.0 VDC max. 50 µs max. ...

Page 22

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Output Specifications ●Output Specifications for Relay Outputs Item Maximum switching capacity Minimum switching capacity Resistive load Electrical Service life of Inductive load relay Mechanical ON delay OFF response time Circuit configuration Estimating the Service Life of Relays Under normal conditions, the service life of output contacts is as shown above. The service life of relays is as shown in the following diagram as a guideline ...

Page 23

... Note: The OFF and ON refer to the output transistor. The output transistor level “L”. CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Specification CIO 100.00 and CIO 100.01 CP1E-N14D@-@: 1.5 A/Unit CP1E-N20D@-@: 1.8 A/Unit CP1E-N60D@-@: 5.4 A/Unit CP1E-NA20D@-@: 1.8 A/Unit 1.5V max. 0.1 ms max max. E-type CPU Unit: Normal outputs CIO 100 ...

Page 24

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Built-in Analog I/O (NA-type CPU Units) ●Analog Input Specifications Item Number of inputs Input signal range Max. rated input External input impedance Resolution At 25°C Overall accuracy 0 to 55°C -10 to +10 V A/D conversion data Other ranges Averaging function Open-circuit detection function ● ...

Page 25

... CPU Unit can connect any CP-series Expansion I/O Unit or Expansion Unit. The entire 300 mA from the external power supply can be used if Expansion Units and Expansion I/O Units are not connected. Refer to the CP1E CPU Unit Hardware Manual (Cat. No. W479) for details. ●AC-power-supply or DC-power-supply E10/14/20, N14/20 CPU Unit There is no external power supply on AC-power-supply or DC-power-supply E10/14/20, N14/20 CPU Units ...

Page 26

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Specifications of Expansion I/O Units ●Input Specifications (CP1W-40EDR/40EDT/40EDT1/20EDR1/20EDT/20EDT1/8ED) Item Input voltage 24 VDC +10%/-15% Input impedance 4.7 kΩ Input current 5 mA typical ON voltage 14.4 VDC min. OFF voltage 5.0 VDC max max delay 1 ms max. * OFF delay Circuit configuration Note: Do not apply voltage in excess of the rated voltage to the input terminal. ...

Page 27

... Expansion I/O Units (CP1W-8ER/16ER/20EDR1/32ER/40EDR). Use the PLC in the range of the power supply voltage and output load current as show below. The ambient temperature is restricted for the power-supply CPU Units (CP1E-N/NA@@@@-@). Derating curve of the output load current for Expansion I/O Units (CP1W-8ER/16ER/20EDR1/32ER/40EDR). ...

Page 28

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ ●Transistor Outputs (Sinking or Sourcing) Item CP1W-40EDT CP1W-40EDT1 4 VDC 0.3 A/output Max. switching capacity *1 0.9 A/common 3.6 A/Unit Leakage current 0.1 mA max. Residual voltage 1.5 V max. ON delay 0.1 ms max max. OFF delay 24 VDC +10%/- 300 mA Max. number of Simultaneously ON 16 pts (100%) ...

Page 29

... CP1W-DA041: 2 ms/point (8 ms/all points) Isolation method Photocoupler isolation between analog I/O terminals and internal circuits. No isolation between analog I/O signals. CP1W-DA021: 5 VDC max.; 24 VDC max. Current consumption CP1W-DA041: 5 VDC max.; 24 VDC: 124 mA max. CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ CP1W-AD041 Voltage Input ±30 mA Approx. 250 Ω ...

Page 30

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ ●Analog I/O Units Model Item Number of inputs Input signal range Max. rated input External input impedance Resolution Analog Input Section Overall accuracy A/D conversion data Averaging function Open-circuit detection function Number of outputs Output signal range Allowable external output load resistance ...

Page 31

... Operation indicators Output terminals External power supply Note: Terminal Block (Fixed) Serial Communications Port for N/NA-type CPU Units The Serial Communication Port can be used for a CP1E N/NA-type CPU Unit. CP1E N30/40/60 or NA20 CPU Units Built-in RS-232C port CP1W-CIF01 CP1W-CIF11/12 RS-422A/485 Option ...

Page 32

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Built-in RS-232C Port and CP1W-CIF01 RS-232C Option Board Front Back Communications Status Indicator COMM RS-232 Connector CPU Unit Connector CP1W-CIF11/CIF12 RS-422A/485 Option Board Front Back Communications Status Indicator COMM RDA- RDB + SDA- SDB + FG RS-422A/485 Connector CP1W-CIF41 Ethernet Option Board version 2.0 or higher ...

Page 33

... Commercially available USB cable B connector Peripheral USB port (Conforming to USB 2.0, B connector) Connecting Cable Use the following cable to connect the CP1E CPU Unit to the computer running the Support Software. USB port Port at Unit Port at computer Peripheral USB port USB port (Conforming to USB 2.0, B connector) ...

Page 34

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Unit Versions Units Model numbers CP1E-E@@D@-@ CP1E CPU Units CP1E-N@@D@-@ CP1E-NA@@D@-@ Unit Versions and Programming Devices The following tables show the relationship between unit versions and CX-Programmer versions. Unit Versions and Programming Devices CPU Unit Functions Ver.8.1 or CP1E-E10D@-@ ...

Page 35

... TTIM ACCUMULATIVE TIMER TTIMX TIML LONG TIMER TIMLX CNTR REVERSIBLE COUNTER CNTRX CNR RESET TIMER/COUNTER CNRX CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Comparison Instructions Mnemonic Instruction Input Comparison Instructions (unsigned) Input Comparison Instructions (double, unsigned) Mnemonic Input Comparison Instructions (signed) Input Comparison Instructions (double, signed) ...

Page 36

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Data Shift Instructions Instruction SHIFT REGISTER SFT REVERSIBLE SHIFT REGISTER SFTR WORD SHIFT WSFT ARITHMETIC SHIFT LEFT ASL ARITHMETIC SHIFT RIGHT ASR ROTATE LEFT ROL ROTATE RIGHT ROR ONE DIGIT SHIFT LEFT SLD ONE DIGIT SHIFT RIGHT SRD ...

Page 37

... CSUB CLOCK ADJUSTMENT DATE Failure Diagnosis Instructions Instruction FAILURE ALARM FAL SEVERE FAILURE ALARM FALS Other Instructions Instruction SET CARRY STC CLEAR CARRY CLC EXTEND MAXIMUM CYCLE TIME WDT CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Mnemonic Mnemonic Mnemonic Mnemonic Mnemonic Mnemonic Mnemonic Mnemonic Mnemonic 37 ...

Page 38

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Dimensions CP1E CPU Unit ●CPU Units with 10 I/O Points 66 56 110 100 90 Two, 4.5 dia. ●CPU Units with I/O Points 86 76 110 100 90 ●CPU Units with 30 I/O Points CPU Units with 20 I/O Points and Built-in Analog 130 120 ...

Page 39

... Units with 40 I/O Points 150 140 110 100 90 ●CPU Units with 60 I/O Points 110 100 90 CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ 85 Four, 4.5 dia. 195 185 Four, 4.5 dia ...

Page 40

... CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@ Expansion I/O Units and Expansion Units ●CP1W-8E@@/CP1W-SRT21 ± 0.2 100 ± 0.2 90 Two, 4.5 dia. 5 ●CP1W-20ED@/CP1W-16E@@/CP1W-AD041/CP1W-DA021/CP1W-DA041/CP1W-MAD11/CP1W-TS@@@ ± 0.2 100 ± 0 ●CP1W-40ED@/CP1W-32E@@ 150 140 110 100 Two, 4.5 dia. 50 Four, 4.5 dia. 8 ...

Page 41

... To learn the hardware specifications of the CP1E-E@@D@-@ CP1E PLCs CP1E-N@@D@-@ CP1E-NA@@D@-@ Use this manual together with the CP1E CPU Unit Software Manual (Cat. No. W480) and CP1E CPU Unit Instructions Reference Manual (Cat. No. W483). To learn the software specifications of the CP1E-E@@D@-@ CP1E CP1E-N@@D@-@ CP1E-NA@@D@-@ Use this manual together with the CP1E CPU Unit Hardware Manual (Cat ...

Page 42

MEMO ...

Page 43

... Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses. 10. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority ...

Page 44

... São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br OMRON ELECTRONICS MEXICO • HEAD OFFICE Apodaca, N.L. • 52.811.156.99.10 • 001.800.556.6766 • mela@omron.com OMRON EUROpE B.V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. Tel: +31 (0) 23 568 13 00 Fax: +31 (0) 23 568 13 88 www.industrial.omron.eu Cat. No. P061-E1-06 09/10 OMRON ARGENTINA • ...

Related keywords