CP1E-N20DT1-D Omron, CP1E-N20DT1-D Datasheet - Page 10

no-image

CP1E-N20DT1-D

Manufacturer Part Number
CP1E-N20DT1-D
Description
12In 8PNP RS232,DC PS,Non UL
Manufacturer
Omron
Datasheet

Specifications of CP1E-N20DT1-D

Lead Free Status / Rohs Status
Lead free / RoHS Compliant
10
CP1E-E@@D@-@ CP1E-N@@D@-@/NA20D@-@
Item
Communications
Number of tasks
Maximum subroutine number
Maximum jump number
Scheduled interrupt tasks
Clock
Memory
backup
CIO Area
Work Area (W)
Holding Area (H)
Auxiliary Area (A)
Temporary Relay Area (TR) (TR Area)
Timer Area (T)
Counter Area (C)
Data Memory Area (D)
Operating modes
B-type Peripheral USB Port
Built-in RS-232C port
Serial Option port
Built-in EEPROM
Battery backup With
CP1W-BAT01 Battery
(Sold separately)
Input Bits
Output Bits
Serial PLC Link Words
Transmission
distance
Communications
method
synchronization
Baud rate
Transmission
distance
Supported
protocol
Mountable
Option Boards
Communications
method
synchronization
Baud rate
Compatible
protocols
Conforming to USB 2.0 B type connector
5 m max.
No built-in RS-232C port
Option Board cannot be mounted.
17
128
128
1 interrupt task
Clock function not included.
The time of error occurrence displays 01-01-01
01:01:01 Sunday
Ladder programs and parameters are automatically saved to built-in EEPROM
A section of the Data Memory Area can be saved to the built-in EEPROM.
Battery cannot be mounted.
1,600 bits (100 words): CIO 0.00 to CIO 99.15 (CIO 00 to CIO 99)
1,600 bits (100 words): CIO 100.00 to CIO 199.15 (CIO 100 to CIO 199)
1,440 bits (90 words): CIO 200.00 to CIO 289.15 (words CIO 200 to CIO 289)
1,600 bits (100 words): W0.00 to W99.15 (W0 to W99)
800 bits (50 words): H0.00 to H49.15 (H0 to H49)
Bits in this area maintain their ON/OFF status when operating mode is changed.
Read-only: 7,168 bits (448 words) A0 to A447
Read/write: 4,896 bits (306 words) in words A448 to A753
16 bits: TR0 to TR15
256 timer numbers (T0 to T255 (separate from counters))
256 counter numbers (C0 to C255 (separate from timers))
2 Kwords: D0 to D2047
Of these, 1,500 words can be saved to the backup
memory (built-in EEPROM) using settings in the
Auxiliary Area.
PROGRAM mode: Program execution is stopped.
MONITOR mode: Programs are executed.
RUN mode: Programs are executed.
• One cyclic execution task
• One scheduled interrupt task (always interrupt task 1)
• Six input interrupt tasks (interrupt tasks 2 to 7)
• Sixteen high-speed counter interrupt tasks (interrupt tasks 1 to 16)
This is the normal operating mode.
CP1E-E@@D@-@
Some operations, such as online editing, and changes to present values in I/O memory, are
enabled in this mode.
Preparations can be executed prior to program execution in this mode.
Interface: Conforms to EIA RS-232C.
Half duplex
Start-stop
1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, or 115.2 kbps
15 m max.
1 port (Option Board can be mounted only to N30/40/
60 and NA20 CPU Units.)
Depends on Option Board.
Depends on Option Board.
1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, or 115.2 kbps
Included.
Accuracy (monthly deviation):
-4.5 min to -0.5 min at ambient temperature of 55
-2.0 min to +2.0 min at ambient temperature of 25
-2.5 min to +1.5 min at ambient temperature of 0
CP1W-BAT01 can be used.
Maximum battery service life: 5 years
Backup Time
Guaranteed value (ambient temperature: 55
13,000 hours (approx. 1.5 years)
Effective value (ambient temperature: 25
43,000 hours (approx. 5 years)
8 Kwords: D0 to D8191
Of these, 7,000 words can be saved to the backup
memory (built-in EEP-ROM) using settings in the
Auxiliary Area
• Host Link
• 1:N NT Link
• No-protocol mode
• Serial PLC Links (master, slave)
• Modbus-RTU Easy Master
• One RS-232C port: CP1W-CIF01
• One RS-422A/485 port (not isolated): CP1W-CIF11
• One RS-422A/485 port (isolated): CP1W-CIF12
• One Ethernet port: CP1W-CIF41
• Host Link
• 1:N NT Link
• No-protocol mode
• Serial PLC Links (master, slave)
• Modbus-RTU Easy Master
CP1E-NA@@D@-@
CP1E-N@@D@-@
o
C):
o
C):
o
o
o
C
C,
C,

Related parts for CP1E-N20DT1-D