CP1W-20EDR1 Omron, CP1W-20EDR1 Datasheet - Page 28

• Manufacturer Part Number: CP1W-20EDR1
• Description: Expansion 12 In, 8 Out Relay
• Manufacturer: Omron

Specifications of CP1W-20EDR1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

● Pulse outputs
CP1L CPU Units: Output bits CIO 100.00 to CIO 100.03
CP1H-XA/X CPU Units: Output bits CIO 100.00 to CIO 100.07
CP1H-Y CPU Units: Output bits CIO100.04 to CIO 100.07
Note: 1. The above values assume a resistive load and do not consider the im-
● Pulse Outputs (Line-driver Outputs)
Note: Connect a load of 20 mA or less to the output. The Unit may be damaged
■ Analog I/O Specifications (CP1H-XA CPU Units Only)
Built-in Analog Input Switch (Factory Settings)
CP1H-Y CPU Units
Max. switching capacity 30 mA at 4.75 to 26.4 VDC
Min. switching capacity
Max. output frequency
Output waveform
Pulse outputs
Max. output current
Max. output frequency
Circuit configuration
Analog
Input
Section
Analog
Output
Section
Conversion time
Isolation method
ON
OFF
2. The pulse widths during actual use may be smaller than the ones shown
if a current of more than 20 mA is output.
pedance of the cable connecting the load.
above due to pulse distortion caused by connecting cable impedance.
AD1
Item
Item
Number of analog inputs
Input signal range
Max. rated input
External input impedance
Resolution
Overall accuracy
A/D conversion data
Averaging
Open-circuit detection
Number of outputs
Output signal range
Allowable external output
load resistance
External output impedance 0.5 Ω max.
Resolution
Overall accuracy
D/A conversion data
AD2 AD3 AD4
Item
Current input
Voltage input
7 mA at 4.75 to 26.4 VDC
100 kHz
Line-driver outputs, Am26LS31 or equivalent
20 mA
1 MHz
OFF
ON
90%
10%
4
0 to 5 V, 1 to 5 V, 0 to 10 V, or −10 to 10 V
±15 V
1 MΩ min.
1/6,000 or 1/12,000 (full scale)
25°C: ±0.3% full scale/0 to 55°C: ±0.6% full scale
Full scale for −10 to 10 V: F448 (E890) to 0BB8 (1770) hex
Full scale for other ranges: 0000 to 1770 (2EE0) hex
Supported (Set for individual inputs in the PLC Setup.)
Supported (Value when disconnected: 8000 Hex)
2
0 to 5 V, 1 to 5 V, 0 to 10 V, −10 to 10 V
1 kΩ min.
1/6000 or 1/12000 (full scale)
25°C±0.4% of full scale, 0 to 55°C±0.8% of full scale
Full scale for −10 to 10 V: F448 (E890) to 0BB8 (1770) hex
Full scale for other ranges: 0000 to 1770 (2EE0) hex
1 ms/point
Photocoupler isolation between analog I/O terminals and internal circuits. No isolation between analog I/O signals.
Specifications
Specifications
4 ms min.
2 ms min.
CWn+
CWn−
CCWn+
CCWn−
Voltage I/O
● Pulse outputs
CP1L CPU Units: Output bits CIO100.01, CIO 100.03
CP1H-XA/X/Y CPU Units: Output bits CIO101.00, CIO 101.01
Note: 1. The above values assume a resistive load and do not consider the im-
Built-in Analog I/O Terminal Block Arrangement
Max. switching capacity 30 mA at 4.75 to 26.4 VDC
Max. output frequency
PWM output precision
Output waveform
AD1 +
VOUT1
CPU Unit Specifications
2. The pulse widths during actual use may be smaller than the ones shown
AD1 --
IOUT1
pedance of the cable connecting the load.
above due to pulse distortion caused by connecting cable impedance.
AD2 +
COM1
Item
AD2 -- AD3 + AD3 -- AD4 + AD4 --
VOUT2 IOUT2 COM2
0 to 20 mA or 4 to 20 mA
±30 mA
Approx. 250 Ω
25°C: ±0.4% full scale/0 to 55°C: ±0.8% full scale
0 to 20 mA or 4 to 20 mA
600 Ω max.
---
AG
CP1H: 1 kHz, CP1L: 32.8 kHz
ON duty +5%, −0% at output frequency of 1 kHz
OFF
ON
AG
Current I/O
ON duty =
Specifications
T
ton
ton
T
× 100%
41