CP1W-20EDT Omron, CP1W-20EDT Datasheet - Page 11

• Manufacturer Part Number: CP1W-20EDT
• Description: Expansion 12 In, 8 Out NPN
• Manufacturer: Omron

Specifications of CP1W-20EDT

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

20
FA Integrated Tool Package
USB Peripheral Port
All CP-series CPU Units Provide a USB Port as a Standard Feature.
In addition to ladder programming, function block
logic can be written in ST language, which
conforms to IEC 61131-3. Arithmetic processing is
also possible with ST, including processing of
absolute values, square roots, logarithms, and
trigonometric functions (SIN, COS, and TAN).
Processing that is difficult to write in ladder
programming becomes easy using structured text.
Eight interrupt inputs are built in. Quick-response
inputs for pulse widths of 50 μs. The interrupt
inputs can also be used as counters. (Response
frequency: 5 kHz total for 8 interrupt inputs)
The normal inputs can be set in the PLC Setup as interrupt, quick-
response, or counter inputs. (There are 8 normal inputs for the CP1H-
X/XA, 6 for the CP1H-Y, 6 for the CP1L with 20, 30, or 40 points, and 4
for the CP1L with 14 points.)
The Structured Text (ST) Language
Makes Math Operations Even Easier.
High-speed Processing
Interrupt
inputs
Quick-response
inputs
Counter
inputs
Up to Eight Interrupt Inputs Can Be Used.
Computer
running
CX-One
Commercially
available USB
cable
8 normal inputs
The built-in USB port lets you connect to a personal computer
using a general-purpose cable.
Note: The CP1H/CP1L CPU Units support the same function blocks
Processing speed has been increased not only for
basic instructions but also for special instructions as
well. Faster processing of approximately 500
instructions speeds up the entire system.
TRUE, FALSE.
IF , THEN, ELSE, ELSIF , END_IF .
DO, WHILE, END_WHILE.
REPEAT, UNTIL, END_REPEAT.
FOR, TO, BY, DO, END_FOR.
CASE, OF , END_CASE.
EXIT, RETURN.
Addition (+), Subtraction (-), Multiplication (*), Division (/)
Parenthesis (brackets), Array Indexing (square brackets [ ] )
Assignment Operator (:=), Less Than Comparison Operator (<),
Less Than or Equal To Comparison Operator (<=),
Greater Than Comparison Operator (>),
Greater Than or Equal To Comparison Operator (>=),
Equals Comparison Operator (=),
Is Not Equal To Comparison Operator (<>),
Bitwise AND (AND or &), Bitwise OR (OR), Exclusive OR (XOR),
NOT (NOT), Exponentiation (**)
ABS, SQRT, SQRT, LN, LOG, EXP , SIN, COS, TAN, ASIN, ACOS,
ATAN, EXPT
Exponentiation (EXPT)
Compared with the CPM2A, Basic Instructions
Are at Least Six Times Faster and MOV Instructions
Are 26 Times Faster.
Structured Text Commands (Keywords)
Operators
Numerical Functions
Arithmetic Functions
CPM2A
CPM1A
and ST language as CS/CJ-series CPU Units with unit version 3.0.
CP1H
CP1L
0.1 μs
(The CP1H/CP1L USB port is used only for
connecting to a Programming Device.)
Note: Programming Consoles (CQM1H-PRO01,
0.3 μs
0.55 μs
C200H-PRO027, etc.) cannot be used with
CP1H and CP1L CPU Units.
0.64 μ s
Commercially available
USB cable (A-type male
connector to B-type female
connector) can be used,
helping to keep costs
down.
1.72 μ s
LD instruction
MOV instruction
4.1 μs
7.8 μ s
16.3 μ s
All memory area values
can be monitored and
changed. Switch between
decimal and hexadecimal
or monitor 2-word
hexadecimal data, such as
high-speed counter values,
in decimal.
The backlight on the LCD
screen will turn red when
an error occurs to notify
you of the error status.
You can monitor the
displayed error details and
the error log.
LCD Displays and Settings
Compact Display and Setting Device
Available to Mount on CPU Unit for Easy Maintenance and
Startup Adjustments
Applicable CPU Units and Functions
Data values in the PLC can be easily monitored or changed by adding the new LCD Option Board. This
enables visually checking the operation status, such as error occurrence and error details. Register in
advance functions that you use often to quickly perform settings and confirm operation. Functionality can
also be expanded to items not included in the CPU Unit, such as calendars and timers.
Monitoring and Changing Data Values
Visual Checking of Status with Display
of PLC Error Details
I/O Monitoring
I/O Monitoring
CP1H/CP1L
(except CP1L-L10)
Can be mounted to
option board slot 1.
CP1H
CP1L
CPU Units with 30, 40,
or 60 I/O points
Can be mounted to
option board slot 1.
Up to seven fixed characters and the present value of
word data can be displayed. Simply press the up and
down keys from the initial screen to perform
monitoring. Of course, you can also change the
settings. Plus, up to 48 characters can be set in
advance and then
displayed when a specified
bit turns ON. This makes
onsite setting and
confirming faster.
You can use calendar
timers, weekly timers, and
daily timers. Sixteen of
each timer type can be set.
Simply press the up and down keys to quickly
display up to 16 registered monitor screens.
Expanded Functionality with Calendar Timers,
and Other Items Not Included in the CPU Units
User Monitor Settings and Messages
Variety of Additional Functions
An LCD Option Board interface can
be used in option board slot 1.
USB Peripheral Port
LCD Displays and Settings
CPU Units with 14 points
or 20 I/O points
Can be mounted to
option board slot 1.
CP1L
CP1W-DAM01
LCD Option Board
21