NS5-MQ10B-V2 Omron, NS5-MQ10B-V2 Datasheet - Page 147

• Manufacturer Part Number: NS5-MQ10B-V2
• Description: 5 Mono Tchsrn,Serial+USB,Bk 60
• Manufacturer: Omron

Specifications of NS5-MQ10B-V2

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5-1-1
Host Types and Settings
Recommended Network Configuration Devices
The following products are recommended for configuring the network when an Ethernet Unit
is used.
Hub
Twisted-
pair
cable
Connectors (Modular
plug)
Units that are used for Ethernet communications vary according to the type and series of
OMRON PLC used.
When connecting an Ethernet Unit, check the series and type of the PLC that it will be con-
nected to and the model of the Unit that is mounted to the PLC.
For details on the hosts that can be connected to NS-series PTs via the Ethernet, refer to
Appendix 8 Standard Models.
The types of hosts that can be connected to NS-series PTs with the Ethernet and the host
settings are as follows:
Ethernet Unit
Hub
Twisted-pair cable
Coaxial cable
Transceiver
Transceiver cable
24-VDC power supply
Coaxial cable terminator
(terminating resistance)
Network configuration
Configuration
devices
100Base-
TX
10Base-T
device
Phoenix
Contact
Fujikura
Fujikura
Panduit Corp.
Maker
A Communications Unit for connecting the PLC to the Ethernet net-
work.
A network device that serves as a central wiring point for multiple
terminals.
Cable consisting of four pairs of thin, copper wires twisted into a cross
cable or a straight cable. Twisted-pair cables are used for
10/100Base-T networks.
Cable consisting of a central conductor surrounded (in concentric cir-
cles) by insulation and an external conductor of braided wire. This
cable is used for 10Base-5 networks.
A device that serves as an interface between the coaxial cable and
nodes.
Cable used to connect the transceiver to the nodes.
A 24-VDC external power supply for supplying power to the trans-
ceiver through the transceiver cable.
Connected to both ends of the coaxial cable.
FL SWITCH 5TX
(5-port switching hub)
Note: For FA envi-
ronment
CTP45-LAN5
0.5 mm x 4P
Specifications: UTP
cable (unshielded
twisted-pair cable)
Category 5, 5e
CTP45-LAN5
0.5 mm x 4P
Specifications: UTP
cable (unshielded
twisted-pair cable)
Category 5, 5e
MP588-C
Model
Details
5-1 Connecting to Host Via Ethernet
http://www.phoenixcontact.com/jp
http://www.fujikura.co.jp/ie_e.html
http://www.panduit.com
URL
5-3