NS5-MQ10B-V2 Omron, NS5-MQ10B-V2 Datasheet - Page 253

• Manufacturer Part Number: NS5-MQ10B-V2
• Description: 5 Mono Tchsrn,Serial+USB,Bk 60
• Manufacturer: Omron

Specifications of NS5-MQ10B-V2

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Indicators do
not light.
The indicator
is lit orange
and the screen
is blank.
The indicator
is lit green and
the screen is
blank.
The indicator
is flashing
green and the
buzzer repeat-
edly turns ON
and OFF.
The screen is
blank and the
indicator is
flashing green.
Symptoms at
PT
The system
program is cor-
rupted (fatal error).
The system
program is
corrupted (fatal
error).
The Memory Card
cannot be recog-
nized.
The system pro-
gram is corrupted
(non-fatal error).
The combination of
NS-series PT
hardware and sys-
tem program ver-
sion is incorrect.
In the following
cases, project data
was downloaded
without clearing the
log data saved in
the NS.
• A project was
• An attempt was
The backlight has
malfunctioned.
Automatic upload/
download has
ended normally.
downloaded to the
NS-series PT in
which settings
related to history,
such as alarm/
event or data log
settings, have
been changed.
made to download
a project that was
different from the
project saved in
the NS.
Cause
The PT may be faulty. Contact your nearest OMRON repre-
sentative.
The PT may be faulty. Contact your nearest OMRON repre-
sentative.
• Use a Memory Card specified by OMRON. (Refer to 3-6
• If you can confirm that the NS-series PT is operating nor-
Recovery/update the system program. (Refer to 3-6 Using
Memory Cards.)
Contact your nearest OMRON representative if the same
problem occurs after recovering/updating the system pro-
gram.
Download the project data again. When downloading the
project data again, be sure to clear the log data saved in the
NS.
The backlight must be replaced. Contact your nearest
OMRON representative.
This is not an error. Turn OFF all the DIP switch pins and
turn ON the power to the PT again.
Using Memory Cards.)
mally after the Memory Card has been removed from the
PT, there may be a failure in the Memory Card. Replace
the Memory Card before using the PT.
Possible countermeasure
7-3 Troubleshooting and Maintenance
7-7