NS5-MQ10B-V2 Omron, NS5-MQ10B-V2 Datasheet - Page 85

• Manufacturer Part Number: NS5-MQ10B-V2
• Description: 5 Mono Tchsrn,Serial+USB,Bk 60
• Manufacturer: Omron

Specifications of NS5-MQ10B-V2

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3-7 Installing the Video Input Unit
3-7-1
Video Input Unit Components
A Video Input Unit (NS-CA001 or NS-CA002) can be mounted to an NS-series PT. Mounting
a Video Input Unit allows images from a video camera or vision sensor to be displayed on
the PT screen. This section explains how to connect a Video Input Unit to the PT with a cable
using the NS-CA001 as an example.
A Video Input Unit can be connected to the NS8, NS10, NS12 or NS15 (except that the NS-
CA001 cannot be connected to the NS15. Also, the NS15 does not support video input from
the NS-CA002, but it does support analog RGB input from the NS-CA002). A Video Input
Unit cannot be connected to the NS5.
Reference
The following table shows the Video Input Unit's product configuration.
NS-CA001
Video Input Unit
Precautions
for Safe Use
Model
Refer to the NS Series RGB and Video Input Unit Operation Manual (Cat. No. V086)
for information on NS-CA002 installation methods.
Video Board (1)
Cover (1)
Cable (1)
Screw (M3) (9)
Instruction sheet
To comply with EC Directives when mounting the Video Input Unit on the PT,
attach the PT to a control panel that has been cut to fit the size. (Refer to 3-1-3
Mounting the PT to the Control Panel for panel cutout dimensions.)
Name
Components
Allows video input.
Protects Video Board.
ground terminal and the cover to
prevent noise.
These screws are used for the
following:
• Securing the Video Board to
• Securing the cover to the back
• Attaching the cable to the
Instruction sheet for NS-CA001.
Connects the PT's functional
the back of the PT.
of the PT.
cover.
Contents
3-7 Installing the Video Input Unit
3-31