CS1W-SCU31-V1 Omron, CS1W-SCU31-V1 Datasheet - Page 3

• Manufacturer Part Number: CS1W-SCU31-V1
• Description: 2 RS422/RS485 Serial Ports
• Manufacturer: Omron

Specifications of CS1W-SCU31-V1

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

■ Characteristics
Note: 1. The indication of K thermocouples in the − 200 to 1,300°C range, T and N thermocouples at a temperature of − 100°C or less, and U and
Indication accuracy
Hysteresis
Proportional band (P)
Integral time (I)
Derivative time (D)
Control period
Manual reset value
Alarm setting range
Sampling period
Influence of signal source
resistance
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Weight
Degree of protection
Memory protection
Standards Approved standards
EMC Directive
2. “EU” stands for Engineering Unit. The location of the decimal point depends on the type of sensor that is selected.
3. B, R, S, and W sensors: 0.2°C/ Ω max. (100 Ω max.)
L thermocouples at any temperature is ±2°C ±1 digit maximum. The indication of B thermocouples at a temperature of 400°C or less is
unrestricted. The indication of R and S thermocouples at a temperature of 200°C or less is ±3°C ±1 digit max.
W = (±0.5% of indication value (PV) or ±3°C, whichever is greater) ±1 digit max. PLII = (±0.5% of indication value (PV) or ±2°C, whichever
is greater) ±1 digit max.
The indication accuracy for K thermocouples in the − 199.9 to 999.9°C range
is greater) ±10 digit maximum. However, at a temperature of -100°C or less, it is ±2°C ±10 digit maximum.
If the decimal point locations is set to 0 (****), however, it will be treated as if it were set to 1 (***.*).
Conformed standards EN61010-1 (IEC61010-1): Pollution level 2, overvoltage category II
Thermocouple input/platinum resistance thermometer input:
Analog input: ±0.5% FS ±1 digit max.
CT input:
0.1 to 999.9 EU (in units of 0.1 EU) (See note 2.)
0.1 to 999.9 EU (in units of 0.1 EU) (See note 2.)
0 to 3,999 s (in units of 1 s)
0.0 to 999.9 s (in units of 0.1 s)
0.5 s, 1 to 99 s (in units of 1 s)
0.0% to 100.0% (in units of 0.1%)
− 1,999 to 9,999 (decimal point position depends on input type)
250 ms
Thermocouple:
Platinum resistance thermometer: 0.4°C (0.8°F)/ Ω max. (10 Ω max per line)
20 M Ω min. (at 500 VDC)
600 VAC, 50/60 Hz for 1 min between current-carrying terminals of different polarity
10 to 55 Hz, 20 m/s
150 m/s
180 g
Rear case: IP20, Terminal section: IP00
EEPROM (non-volatile memory) (number of writes: 100,000)
UL61010C-1, CSA C22.2 No.1010-1
EMI:
EMI Radiated:
EMI Conducted:
EMS:
ESD Immunity:
Electromagnetic Field Immunity:
Burst immunity/Noise Immunity:
Conducted Disturbance Immunity:
Surge Immunity:
Power Frequency Magnetic Field Immunity: EN61000-4-8
2
, 3 times each in 6 directions
(±0.5% of indication value (PV) or ±1°C, whichever is greater) ±1 digit max. (See note 1.)
±5% FS ±1 digit max.
2
for 2 hours each in X, Y, and Z directions
0.1°C (0.2°F)/ Ω max. (100 Ω max per line) (See note 3.)
Modular Temperature Controller
EN61326
EN55011 Group1 class A
EN55011 Group1 class A
EN61326
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-6
EN61000-4-5
V1.2
is (±0.5% of indication value (PV) or ±1°C, whichever
EJ1
3