D4GL-2DFG-A

Manufacturer Part NumberD4GL-2DFG-A
DescriptionInterlock Switch
ManufacturerOmron
SeriesD4GL
D4GL-2DFG-A datasheet
 


Specifications of D4GL-2DFG-A

Lead Free Status / Rohs Status Details  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
Page 5/7

Download datasheet (984Kb)Embed
PrevNext
Safety Precautions
Refer to the “Precautions for All Switches” and “Precautions for All Safety Door Switches”.
!CAUTION
Do not use this product mounted so that it slides
vertically. This may cause malfunction, resulting in
personal injury.
Do not insert the operation key with the door open.
Devices may start to operate, resulting in injury.
Precautions for Safe Use
• Do not drop the Product. Doing so may prevent the Product from
functioning to full capacity.
• Mount the Product securely to prevent it from falling. Otherwise,
injury may occur.
• Do not attempt to disassemble or modify the Switch. Doing so may
cause the Switch to malfunction.
• Make sure that the gap between the shot bolt and the guide is ±0.5
mm. Otherwise, excessive wear or damage may cause
malfunction.
• To ensure safety, do not operate the Switch with anything other
than the Slide Key Unit.
• Your hand may be injured by being pinched between the Operation
Key and Switch when closing the door with your hand on the
Product.
• Be careful to avoid pinching your hand when operating the Slide
Handle.
• Do not impose a force of exceeding 1 N·m when operating the
Lockout Key. Otherwise, the Product may be damaged and may
not operate properly.
To prevent damage, attach the supplied labels for display near the
Product.
• Do not force the slide handle to move when the lockout key is not
inserted. Doing so may damage the product and make operation
impossible.
• Do not force the slide handle to move when the door is locked.
• Do not close the door with the shot bolt removed. Doing so may
damage the product and make operation impossible.
• Turn the Lockout Key to the "SLIDE LOCK" position and remove it
when opening the door to prevent a third party from operating the
Slide Handle.
• The durability of the Switch varies considerably depending on the
switching conditions. Always confirm the usage conditions by using
the Switch in an actual application, and use the Switch only for the
number of switching operations given in the performance
specifications.
• The user must not maintain or repair equipment incorporating the
Switch. Contact the manufacturer of the equipment for any
maintenance or repairs required.
• Refer to the D4GL Guard Lock Safety-door Switch Datasheet and
Instruction Sheet about storage conditions, ambient conditions,
Switch details, and handling methods.
• Do not apply excessive force in the direction of the slide. This may
damage the product and cause it to malfunction.
• Do not force the switch or cable. This
may damage the product. The cable
should be fixed at a point separate
from the switch.
Precautions for Correct Use
• This product is for D4GL Guard Lock Safety-door Switch only. This
product cannot be used with any other manufacturer's door
switches.
• Use the Slide Handle in the direction A or B in the following figure.
• Loose screws may result in malfunction. Use washers and tighten
the screws to the specified torques. Mount the Slide Base at four
points with screws. Adding adhesive is recommended for
preventing the screws from loosening.
Also, when mounting the Product to a door for disable-prevention
purposes, purchase and use tamper-resistant screws.
Appropriate Tightening Torque
Slide Key mounting screw (M6)
Operation key special mounting screw (screws supplied) 2.4 to 2.8 N·m
Switch special mounting screw (screws supplied)
Technical Specifications
Ambient operating temperature −10 to 55°C (with no icing)
Ambient operating humidity
Mechanical durability
Weight
• Do not store the Switch where corrosive gases (e.g., H
NH
, HNO
or Cl
3
3
temperature or humidity.
• Perform maintenance inspections periodically.
• When the lockout key is attached to your wrist, be careful that the
strap does not get stuck in equipment.
SLIDE
LOCK
SLIDE
FREE
SLIDE HANDLE
D4SL-SK
D4GL-SK10-LK
SLIDE
LOCK
FREE
SLIDE
SLIDE
FREE
LOCK
SLIDE
B
A
UN
–LOCK
LOCK
6.0 to 7.0 N·m
1.3 to 1.5 N·m
95% max.
20,000 operations min.
Approx. 0.6 kg (not including D4JL Guard
Lock Safety-door Switch)
S, SO
2
) or dust is present, or in locations subject to high
2
,
2
5