WM8990ECS/RV Wolfson Microelectronics, WM8990ECS/RV Datasheet - Page 48

no-image

WM8990ECS/RV

Manufacturer Part Number
WM8990ECS/RV
Description
Audio CODECs Stereo CODEC w.Class AB/D speaker driver
Manufacturer
Wolfson Microelectronics
Datasheet

Specifications of WM8990ECS/RV

Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
WM8990ECS/RV
Quantity:
1 464
Part Number:
WM8990ECS/RV
Manufacturer:
TESTED
Quantity:
20 000
WM8990
w
INPUT MIXER ENABLE
The WM8990 has two analogue input mixers which allow the Input PGAs and Line Inputs to be
combined in a number of ways and output to the ADCs or to the Output Mixers via bypass paths.
The input mixers INMIXL and INMIXR are enabled by the AINL_ENA and AINR_ENA register bits, as
described in Table 7. These control bits also enable the Input Multiplexers and Differential Input
drivers, described in the following section.
Table 7 Input Mixer Enable
INPUT MIXER CONFIGURATION
The left and right channel input multiplexers AINLMUX and AINRMUX select one of three input
sources for the Left and Right channels independently. The three input sources are as follows:
1. INMIXL or INMIXR output (a combination of Input PGAs, line inputs and the internal record path).
2. RXVOICE (a differential to single-ended conversion of RXP and RXN inputs).
3. DIFFINL or DIFFINR output (a differential to single-ended conversion of two Input PGAs).
The input source for the multiplexers is controlled by register bits AINLMODE and AINRMODE as
described in Table 8.
Table 8 Input Mixer Configuration
The Input Mixer configuration is described for each of the three modes in the following sections. Note
that the Left and Right multiplexer (mode) settings can be set independently.
R2 (02h)
R39 (27h)
REGISTER
REGISTER
ADDRESS
ADDRESS
9
8
3:2
1:0
BIT
BIT
AINL_ENA
(rw)
AINR_ENA
(rw)
AINLMODE
[1:0]
AINRMODE
[1:0]
LABEL
LABEL
0b
0b
DEFAULT
00b
00b
DEFAULT
Left Input Path Enable
(Enables AINLMUX, INMIXL, DIFFINL and
RXVOICE input to AINLMUX)
0 = Input Path disabled
1 = Input Path enabled
Right Input Path Enable
(Enables AINRMUX, INMIXR, DIFFINR
and RXVOICE input to AINRMUX)
0 = Input Path disabled
1 = Input Path enabled
AINLMUX Input Source
00 = INMIXL (Left Input Mixer)
01 = RXVOICE (RXP - RXN)
10 = DIFFINL (LIN12 PGA - LIN34 PGA)
11 = (Reserved)
AINRMUX Input Source
00 = INMIXR (Right Input Mixer)
01 = RXVOICE (RXP - RXN)
10 = DIFFINR (RIN12 PGA - RIN34 PGA)
11 = (Reserved)
DESCRIPTION
DESCRIPTION
PD, March 2009, Rev 4.0
Production Data
48

Related parts for WM8990ECS/RV