MAX13051ASA-T Maxim Integrated Products, MAX13051ASA-T Datasheet - Page 13

• Manufacturer Part Number: MAX13051ASA-T
• Description: Network Controller & Processor ICs
• Manufacturer: Maxim Integrated Products

Specifications of MAX13051ASA-T

• Product: Controller Area Network (CAN)
• Number Of Transceivers: 1
• Data Rate: 1 Mbps
• Supply Voltage (max): 5.25 V
• Supply Voltage (min): 4.75 V
• Supply Current (max): 72 mA
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Package / Case: SOIC-8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

tance. Place the resistor at RS as close as possible to
the MAX13052 to minimize any possible noise coupling
at the input.
The MAX13050/MAX13052/MAX13053/MAX13054
require no special layout considerations beyond com-
mon practices. Bypass V
0.1µF ceramic capacitor mounted close to the IC with
short lead lengths and wide trace widths.
ESD-protection structures are incorporated on CANH
and CANL to protect against ESD encountered during
handling and assembly. CANH and CANL inputs have
extra protection to protect against static electricity found
in normal operation. Maxim’s engineers have developed
state-of-the-art structures to protect these pins against
±8kV ESD Contact Discharge without damage. After an
ESD event, the MAX13050/MAX13052/MAX13053/
Transceivers with ±80V Fault Protection
______________________________________________________________________________________
Power Supply and Bypassing
CC and
Industry-Standard High-Speed CAN
V
CC
ESD Protection
2 to GND with a
MAX13054 continue working without latchup. ESD pro-
tection can be tested in several ways. The CANH and
CANL inputs are characterized for protection to ±8kV
using the IEC 61000-4-2 Contact Discharge Method per
IBEE Test facility.
ESD performance depends on a number of conditions.
Contact Maxim for a reliability report that documents
test setup, methodology, and results.
Figure 5 shows the IEC 61000-4-2 Contact Discharge
Model, and Figure 6 shows the current waveform it
generates when discharged into a low impedance. This
model consists of a 100pF capacitor charged to the
ESD voltage of interest, which is then discharged into
the device through a 1.5kΩ resistor.
ESD Test Conditions
Human Body Model
13