IPP100N08S2-07 Infineon Technologies, IPP100N08S2-07 Datasheet - Page 8

• Manufacturer Part Number: IPP100N08S2-07
• Description: MOSFET N-CH 75V 100A TO220-3
• Manufacturer: Infineon Technologies
• Series: OptiMOS™r

Specifications of IPP100N08S2-07

• Fet Type: MOSFET N-Channel, Metal Oxide
• Fet Feature: Standard
• Rds On (max) @ Id, Vgs: 7.1 mOhm @ 80A, 10V
• Drain To Source Voltage (vdss): 75V
• Current - Continuous Drain (id) @ 25° C: 100A
• Vgs(th) (max) @ Id: 4V @ 250µA
• Gate Charge (qg) @ Vgs: 200nC @ 10V
• Input Capacitance (ciss) @ Vds: 4700pF @ 25V
• Power - Max: 300W
• Mounting Type: Through Hole
• Package / Case: TO-220-3 (Straight Leads)
• Configuration: Single
• Transistor Polarity: N-Channel
• Resistance Drain-source Rds (on): 0.0071 Ohms
• Drain-source Breakdown Voltage: 75 V
• Gate-source Breakdown Voltage: +/- 20 V
• Continuous Drain Current: 100 A
• Power Dissipation: 300 W
• Maximum Operating Temperature: + 175 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 55 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: SP000219005

IPB100N08S2-07
IPP100N08S2-07, IPI100N08S2-07
Published by
Infineon Technologies AG
St.-Martin-Straße 53
D-81541 München
© Infineon Technologies AG 2004
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as
a guarantee of characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement,
regarding circuits, descriptions and charts stated herein.
Information
For further information on technology, delivery terms and conditions and prices, please contact your
nearest Infineon Technologies Office (www.infineon.com)
Warnings
Due to technical requirements, components may contain dangerous substances.
For information on the types in question, please contact your nearest Infineon Technologies Office.
Infineon Technologies' components may only be used in life-support devices or systems with the
expressed written approval of Infineon Technologies, if a failure of such components can reasonably
be expected to cause the failure of that life-support device or system, or to affect the safety or
effectiveness of that device or system. Life support devices or systems are intended to be implanted
in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail,
it is reasonable to assume that the health of the user or other persons may be endangered.
Rev. 1.0
page 8
2006-03-03