GMA.0B.030.DG LEMO, GMA.0B.030.DG Datasheet - Page 121

• Manufacturer Part Number: GMA.0B.030.DG
• Description: BEND RELIEF 3.0MM
• Manufacturer: LEMO
• Series: B Seriesr

Specifications of GMA.0B.030.DG

• Product Type: Accessories
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

These socket allow the device on which they are fitted to reach a protection index of IP68 as per IEC 60529. They are fully
compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation,
etc.
These models are identified by a letter «P» at the end of the reference.
These models are also available in a vacuumtight version. Such models are identified by an additional letter «V» at the end
of the part number (certificate on request).
Epoxy resin is used to seal these models.
Technical Characteristics
Mechanical and Climatical
HGP.2C
Panel cut-out (page 122)
www.lemo.com
Endurance
Humidity
Temperature range
Salt spray corrosion test
Characteristics
Fixed socket, nut fixing,
watertight or vacuumtight
> 500 cycles
> 144h
Value
up to 95% at 60° C
- 20° C, +80° C
S 17
IEC 60512-5 test 9a
IEC 60512-6 test 11f
S 13.8
20 maxi
Standard
5 maxi
4
Note:
HEP.2C
Panel cut-out (page 122)
Watertight or vacuumtight models
Climatical category
Leakage rate (He)
Maximum operating pressure
1)
Characteristics
only for vacuumtight models.
Fixed socket, nut fixing, watertight
or vacuumtight (back panel mounting)
1)
20/80/21
< 10
5 bars
Value
-7
mbar.l.s
5.2 maxi
-1
5.7
20 maxi
IEC 60068-1
IEC 60512-7 test 14b
IEC 60512-7 test 14d
10.6
Standard
S 13.8
3.5
®
119
®