MS27467T15B35P Conesys, MS27467T15B35P Datasheet - Page 2

• Manufacturer Part Number: MS27467T15B35P
• Description: Conn MIL-DTL-38999 Circular PIN 37 POS Crimp ST Cable Mount 37 Terminal 1 Port
• Manufacturer: Conesys
• Type: MIL-DTL-38999 Circularr

Specifications of MS27467T15B35P

• Gender: PL
• Termination Method: Crimp
• Mounting: Cable Mount
• Body Orientation: Straight

Performance Specifications
Operating Temperature Range
Finish B: -65°C to +175°C (-85°F to +347°F)
Finish F: -65°C to +200°C (-85°F to +392°F
Finish A: -65°C to +150°C (-85°F to +302°F)
Material and Plating Data (Finish)
B – aluminum shell, olive drab cadmium over nickel base
F – aluminum shell, electroless nickel finish
A – aluminum shell, silver to light iridescent yellow color
(bright) cadmium over electroless nickel
Corrosion Resistance
Finishes A and B withstand 500-hour salt spray.
Finish F withstands 48-hour salt spray.
Durability
Minimum of 500 mating cycles
Environmental Seal
Wired, mated connectors with specified accessories
attached, shall meet the altitude-immersion test specified in
MIL-DTL-38999.
Fluid Resistance
Connectors resist specified immersions in MIL-PRF-7808,
MIL-PRF-23699, MIL-PRF-5606, M2-V Chevron oil, Coolanol
25, MIL-DTL-83133 (JP-8), MIL-DTL-5624 (JP-4, JP-5),
SAE-AMS1424 Type I, and other solvents and cleaning agents.
Shell-to-Shell Conductivity
G
G
Voltage Rating
Note:
entirely to the designer, as he is in the best position to know
www.conesys.com
www.conesys.com
Finish F = 1.0 millivolt maximum potential drop
Finishes A and B = 2.5 millivolts maximum potential drop
Service Rating
The establishment of electrical safety factors is left
M
N
II
I
Suggested Operating Voltage
AC (RMS)
400
300
600
900
(Sea Level)
1250
550
450
850
DC
Test Voltage
Sea Level
–
V RMS
1300
1000
1800
2300
3
–
Shielding Effectiveness
RFI and EMI attenuation at the specified frequencies meet
the requirements of MIL-DTL-38999.
G
G
Shock and Vibration Requirements
Wired, mated connectors shall not be damaged, nor shall
there be a current interruption longer than one microsecond
when subjected to the following:
Standard Shock
Mated connectors withstand a pulse of approximate half
sine wave of 300 G ± 15 percent magnitude with duration of
3 ± 1 milliseconds applied in three axes per MIL-STD-1344,
method 2004.
High Impact Shock
When mounted as specified in MIL-S-901, grade A, a drop
of a 400 lb. Hammer from 1 foot, 3 feet and 5 feet applied to
connector in three axes, totaling nine impacts.
Vibration
Mated connectors, with proper accessories, withstand the
following vibration levels:
G
G
exactly what peak voltages, switching currents, transients,
etc., can be expected in a particular circuit.
RFI shielding effectiveness of mated connectors with RFI
backshells is measured in a triaxial radio frequency leak-
age fixture.
EMI shielding effectiveness is measured at the interface
of mated connectors and tested by the mode-stirred
technique specified in method 3008 of MIL-STD-1344.
Sine Vibration per MIL-STD-202, method 204, test
condition G.
Random Vibration per MIL-STD-1344, method 205, test
condition V and test condition VI, Letter “J” at ambient
temperature.
Test Voltage
50,000 Ft.
Performance Specifications
V RMS
550
400
600
800
Test Voltage
70,000 Ft.
MIL-DTL-38999
V RMS
350
260
400
500
sales
sales
Series I
@
@
aero-electric.com
aero-electric.com
Test Voltage
100,000 Ft.
V RMS
200
200
200
200