MS3476L16-26P Conesys, MS3476L16-26P Datasheet

no-image

MS3476L16-26P

Manufacturer Part Number
MS3476L16-26P
Description
Conn MIL-DTL-26482 Circular PIN 26 POS Crimp ST Cable Mount 26 Terminal 1 Port
Manufacturer
Conesys
Type
MIL-DTL-26482 Circularr
Datasheet

Specifications of MS3476L16-26P

Gender
PL
Termination Method
Crimp
Mounting
Cable Mount
Body Orientation
Straight
Features and Application
MIL-DTL-26482 Series 2, bayonet coupling, rear-removable
crimp contact connectors were designed as an upgrade to
MIL-DTL-26482 Series 1. Series 2 connectors are inter-
mountable and interchangeable with both solder and
front-release crimp Series 1. They are also identical to the
inactivated MIL-DTL- 83723 Series I connectors.
Series 2 connectors are widely used on commercial, military
and aerospace systems requiring general-purpose, miniature
cylindrical bayonet coupling connectors.
This family of connectors is offered in 4 receptacle-mounting
styles. They include narrow flange wall mounting receptacles,
wide flange wall mounting receptacles, cable connecting
receptacles and jam nut mounting receptacles which incorpo-
rate “O” ring seals, designed for rear panel “D” hole mounting.
Plugs are available in two designs, with and without RFI
grounding.
Thirty-three insert arrangements per MIL-STD-1669 are
tooled and qualified to MIL-DTL-26482 Series 2, utilizing
3 to 61 M39029 contacts. Contacts come in sizes 20, 16 and
12, terminating wire sizes from 24 to 12 gauge.
These connectors are available in wide range of shell
materials and finishes. Aluminum shells are offered in
electroless nickel, olive drab cadmium and black anodic.
Other finishes such as zinc cobalt are available upon request
to commercial callouts only. In addition, we offer passivated
stainless steel shells with standard environment-resisting
inserts (commercial callouts only), and for highly corrosive
environments, nickel-aluminum-bronze shells with standard
environment-resisting inserts (commercial callouts only).
Universal I/R Tool –
for both insertion and removal of contacts.
Insert Polarization –
in mating of adjacent connectors having identical insert
arrangement.
www.conesys.com
A single, expendable plastic tool is used
Alternate insert clocking positions aid
69
Closed-Entry Socket Insert –
has lead-in chamfers for positive alignment of pins (even
partially bent within pre-established limits) with sockets.
Interfacial Pin Insert Seal –
around each pin, which mate into lead-in chamfers of hard
face socket insert, provide individual contact sealing.
Interfacial seal is never touched by service tools.
Elastomer Wire Sealing Grommet –
range of wire diameters is assured by a triple wire seal in
each cavity at the rear of the connector.
Superior Contact Stability –
system features a stamped beryllium-copper retaining clip
captivated by molded-in shoulders of each contact cavity in
the insulator. A rear-inserted M81969 plastic tool expands
the tines beyond the shoulder, releasing the contact.
Features and Application
Raised moisture barriers
MIL-DTL-26482
Rear release crimp contact
Hard dielectric socket face
Sealing over a wide
sales
Series 2
@
aero-electric.com

Related parts for MS3476L16-26P

MS3476L16-26P Summary of contents

Page 1

... Insert Polarization – Alternate insert clocking positions aid in mating of adjacent connectors having identical insert arrangement. www.conesys.com MIL-DTL-26482 Features and Application Closed-Entry Socket Insert – Hard dielectric socket face has lead-in chamfers for positive alignment of pins (even partially bent within pre-established limits) with sockets. Interfacial Pin Insert Seal – ...

Page 2

... Rating AC (RMS) I 600 II 1,000 ** To be used by designer only as a guide. www.conesys.com Durability Mated connectors withstand a minimum of 250 mating cycles for RFI plug (MS3475) and 500 cycles for standard plug (MS3476). Shock and Vibration Requirements Wired, mated connectors shall not be damaged, coupling ...

Page 3

... One spare contact for inserts requiring each contact and two spares for inserts with 27 or more of each size, and a minimum of one sealing plug up to 15% of the number of contacts. In addition, one plastic insetion/removal tool of each size is included. www.conesys.com Part Number Development MS34 70 L ...

Page 4

... D MAX BAYONET PINS BLUE COLOR BAND MAX PANEL THICKNESS & SCREWHEAD .087(2.21) S.S. 8–18 .212(5.38) S.S. 20–24 Note: Maximum grommet O.D. is same as page 74 +.016 ±.13 Maximum ± ...

Page 5

... Cable Connecting Receptacle MAX MINOR KEYWAYS 3 BAYONET PINS BLUE COLOR BANDS Note: Maximum grommet O.D. is same as page 74 +.016 Maximum ±.016 ±.41 -.015 inch ...

Page 6

... BAYONET PINS BLUE COLOR BAND MAX PANEL THICKNESS & SCREWHEAD .118(3.00) S.S. 8–18 .212(5.38) S.S. 20– Maximum Maximum ±.016 ±.41 inch mm inch mm inch mm ...

Page 7

... E D MASTER KEYWAY "O" RING 3 BAYONET PINS B BLUE COLOR BAND H THREAD HEX NUT PER MS3186 EXCEPT FOR THICKNESS .125(3.18) .108(2.74) Note: Maximum grommet O.D. is same as page 76 ...

Page 8

... BLUE COLOR BAND A B MAX INSERT D ACCESSORY THREAD B C ±.003 ±.08 Maximum inch mm inch mm .355 9.02 .782 19.86 .483 12.27 .926 23 ...

Page 9

... MAX BLUE COLOR BAND RFI STRIP A B MAX INSERT D ACCESSORY THREAD B C Accessory Thread ±.08 Maximum mm inch mm 9.02 .782 19.86 12.27 ...

Page 10

... MAX .290 (7.37) MIN RFI STRIP FULL THREAD A B MAX INSERT D ACCESSORY THREAD – 10 and Note: AC3475 Arctic Coupling Nut, RFI Plug is available to Aero-Electric part number only ...

Page 11

... Note: For C and E, MS3470 and MS3472 call out for tolerance of ±.010 (±.25), however we recommend ±.005 (±.13). www.conesys.com Flange and Jam Nut Receptacles Panel Cutouts MS3474(AE774 ±.010 ±.25 (TP) ±.010 inch ...

Page 12

... Contact Size Amps Millivolts 23.0 42 Note: Test Current and Maximum Voltage Drop when tested with silver-plated wire at 25°C. www.conesys.com Socket Contacts Seal Plugs Military No. Military No. M39029/5-115 MS27488-20-1 M39029/5-116 MS27488-16-1 M39029/5-118 MS27488-12-1 5091-022-204H MS27488-20-1 Positioner Insertion Tool For Socket Contacts Metal Military No ...

Page 13

... Aero-Electric proprietary size 20 contacts used in 8-2, 8-3 and 8-4 layouts only. www.conesys.com Contact Installation Instructions 3. Place the correct insertion tool on the contact so that the wire runs along the groove in the tool. (Tool tip will butt against the shoulder.) Hold the plug or receptacle body fi ...

Page 14

... Yes Yes 19 * Not qualified to MIL-DTL-26482 Series 2. These layouts were designed to mate with solder Series 1 connectors using proprietary Aero-Electric contacts (not QPL’d to M39029) and to avoid confusion are sold only “with contacts” . www.conesys.com MASTER KEYWAY (KEY SHELL INSERT VERTICAL CENTERLINE ...

Page 15

... Yes Yes 39 20-41 Yes Yes 41 22-12 Yes Yes 12 22-21 Yes Yes 21 22-41 Yes Yes 41 22-55 Yes Yes 55 22-95 Yes Yes 32 24-19 Yes No 19 24-31 Yes Yes 31 24-61 Yes Yes 61 www.conesys.com Polarization, Insert Availability & Contact Information Contact Quantity Service By Size Rating ...

Page 16

... MIL-STD-1669 Insert Arrangements (Pin Front View) for MIL-DTL-26482 Series 2 Connectors 8- 10-7 14 18- 16 Not on QPL, available to Aero-Electric part number only. www.conesys.com Insert Arrangements Views 8- 12-8 12 14-12 14 16-14 16 18-30 ...

Page 17

... 20- 20 22- 16 24- 12, II www.conesys.com Insert Arrangements (Pin Front View) for MIL-DTL-26482 Series 2 Connectors Insert Arrangements Views 20-39 20 22-41 22 24- 16, I – 85 – MIL-STD-1669 22- 12 22 24- 20, I sales aero-electric.com @ ...

Related keywords