PKM4610PI Ericsson Power Modules, PKM4610PI Datasheet - Page 49

• Manufacturer Part Number: PKM4610PI
• Description: DC/DC Power Supply Single-OUT 3.3V 20A 66W 8-Pin Quarter-Brick
• Manufacturer: Ericsson Power Modules
• Type: Step Downr
• Series: PKMr

Specifications of PKM4610PI

• Package: 8Quarter-Brick
• Output Current: 20 A
• Output Voltage: 3.3 V
• Input Voltage: 36 to 75 V
• Number Of Outputs: 1
• Output Power: 66 W
• Product: Isolated
• Input Voltage Range: 36 V to 75 V
• Output Voltage (channel 1): 3.3 V
• Output Current (channel 1): 20 A
• Isolation Voltage: 1.5 KV
• Package / Case Size: Quarter Brick
• Output Type: Isolated
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Soldering Information — Through hole mounting
The PKM series DC/DC converters are intended for through
hole mounting in a PCB. When wave soldering is used max
temperature on the pins is specified to 260°C for 10 seconds.
Maximum preheat rate of 4°C/s and temperature of max
150°C is suggested. When hand soldering, care should be
taken to avoid direct contact between the hot soldering iron
tip and the pins for more than a few seconds in order to
prevent overheating.
No-clean flux is recommended to avoid entrapment of
cleaning fluids in cavities inside of the DC/DC power module.
The residues may affect long time reliability and isolation
voltage.
Delivery package information
The products are delivered antistatic clamshells.
Prepared (also subject responsible if other)
EPANHON
Approved
SEC/D (Linda zhong)
PKM 4000 PI series
DC/DC converters, Input 36-75 V, Output 35 A/126 W
Tray properties
Material
Surface resistance
Bake ability
clamshell capacity
Box capacity
PET
10E5 to 10E12 ohms/square
The clamshells can not be baked
20 converters/clamshell
100 converters (5 full clamshells/box)
Checked
(MICKAOV)
PRODUCT SPECIFICATION
No.
4/1301-BMR 631
Date
2006-1-26
Technical Specifi cation
EN/LZT 146 310 R1B Nov 2006
© Ericsson Power Modules AB
Rev
B
Reference
2 (4)
49