LCMXO2280C-3FT324I LATTICE SEMICONDUCTOR, LCMXO2280C-3FT324I Datasheet - Page 25

• Manufacturer Part Number: LCMXO2280C-3FT324I
• Description: CPLD MachXO Family 1140 Macro Cells 1.8V/2.5V/3.3V 324-Pin FTBGA Tray
• Manufacturer: LATTICE SEMICONDUCTOR

Specifications of LCMXO2280C-3FT324I

• Package: 324FTBGA
• Family Name: MachXO
• Number Of Macro Cells: 1140
• Maximum Propagation Delay Time: 5.1 ns
• Number Of User I/os: 271
• Typical Operating Supply Voltage: 1.8|2.5|3.3 V
• Ram Bits: 28262.4
• Memory Type: SRAM
• Operating Temperature: -40 to 100 °C

Lattice Semiconductor
Device Configuration
All MachXO devices contain a test access port that can be used for device configuration and programming.
The non-volatile memory in the MachXO can be configured in two different modes:
The SRAM configuration memory can be configured in three different ways:
Figure 2-22 provides a pictorial representation of the different programming modes available in the MachXO
devices. On power-up, the SRAM is ready to be configured with IEEE 1149.1 serial TAP port using IEEE 1532 pro-
tocols.
Leave Alone I/O
When using IEEE 1532 mode for non-volatile memory programming, SRAM configuration, or issuing a refresh
command, users may specify I/Os as high, low, tristated or held at current value. This provides excellent flexibility
for implementing systems where reconfiguration or reprogramming occurs on-the-fly.
TransFR (Transparent Field Reconfiguration)
TransFR (TFR) is a unique Lattice technology that allows users to update their logic in the field without interrupting
system operation using a single ispVM command. See TN1087,
tion Using TransFR Technology
Security
The MachXO devices contain security bits that, when set, prevent the readback of the SRAM configuration and
non-volatile memory spaces. Once set, the only way to clear the security bits is to erase the memory space.
For more information on device configuration, please see details of additional technical documentation at the end
of this data sheet.
• In IEEE 1532 mode via the IEEE 1149.1 port. In this mode, the device is off-line and I/Os are controlled by
• In background mode via the IEEE 1149.1 port. This allows the device to remain operational in user mode
• At power-up via the on-chip non-volatile memory.
• After a refresh command is issued via the IEEE 1149.1 port.
• In IEEE 1532 mode via the IEEE 1149.1 port.
BSCAN registers.
while reprogramming takes place.
for details.
2-22
Minimizing System Interruption During Configura-
MachXO Family Data Sheet
Architecture