MMU01020C3302FB300 Vishay, MMU01020C3302FB300 Datasheet - Page 5

• Manufacturer Part Number: MMU01020C3302FB300
• Description: Res Thin Film 0805 33K Ohm 1% 1/5W ±50ppm/°C Molded Melf SMD Blister T/R
• Manufacturer: Vishay
• Type: Thin Filmr
• Series: MMUr

Specifications of MMU01020C3302FB300

• Case Size: 0805
• Resistance Value: 33 KOhm
• Power Rating: 1/5 W
• Tolerance: 1 %
• Resistance (ohms): 33K
• Number Of Terminations: 2
• Package / Case: MELF, 0102
• Power (watts): 0.3W
• Composition: Thin Film
• Temperature Coefficient: ±50ppm/°C
• Size / Dimension: 0.043" Dia x 0.087" L (1.10mm x 2.20mm)
• Resistance: 33 KOhms
• Voltage Rating: 150 Volts
• Termination Style: MELF
• Dimensions: 1.1 mm Dia. x 2.2 mm L
• Product: Thin Film Resistors SMD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Height: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: MMU-33.0KCTR

www.vishay.com
16
MMU 0102, MMA 0204, MMB 0207 - Professional
Vishay Beyschlag
DESCRIPTION
Production is strictly controlled and follows an extensive
set of instructions established for reproducibility. A
homogeneous film of metal alloy is deposited on a high grade
ceramic body (85 % Al
and conditioned to achieve the desired temperature
coefficient. Nickel plated steel termination caps are firmly
pressed on the metallised rods. A special laser is used to
achieve the target value by smoothly cutting a helical groove
in the resistive layer without damaging the ceramics. The
resistor elements are covered by a protective coating
designed for electrical, mechanical and climatic protection.
The terminations receive a final pure tin on nickel plating.
Four or five colour code rings designate the resistance value
and tolerance in accordance with IEC 60062*.
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual resistors. Only accepted products are laid directly
into the blister tape in accordance with IEC 60286-3* or bulk
case in accordance with IEC 60286-6*.
ASSEMBLY
The resistors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using wave, reflow or vapour phase as shown in
IEC 61760-1*. Excellent solderability is proven, even after
extended storage in excess of 10 years. The encapsulation
is resistant to all cleaning solvents commonly used in the
electronics industry, including alcohols, esters and aqueous
solutions.The resistors are completely lead (Pb)-free, the
pure tin plating provides compatibility with lead (Pb)-free
soldering processes. The immunity of the plating against tin
whisker growth has been proven under extensive testing.
All products comply with the GADSL
EECA-EICTA
substances. This includes full compliance with the following
directives:
• 2000/53/ECEnd of Vehicle life Directive (ELV) and Annex II
• 2002/95/EC Restriction of the use of Hazardous
• 2002/96/EC Waste Electrical and Electronic Equipment
1)
2)
Electronic
(European trade organisation representing the information and
communications technology and consumer electronics), see
www.eicta.org -> issues -> environment policy -> chemicals ->
chemicals for electronics
Global Automotive Declarable Substance List, see www.gadsl.org
(ELV II)
Substances Directive (RoHS)
Directive (WEEE)
CEFIC (European Chemical Industry Council), EECA (European
Component
2)
list of legal restrictions on hazardous
2
O
Manufacturers
3
, for MICRO-MELF: 96 % Al
For technical questions contact:
Association),
1)
and the CEFIC-
Professional MELF Resistors
EICTA
2
O
3
)
APPROVALS
The resistors are tested in accordance with EN 140401-803
(superseding
EN 60115-1, EN 140400 and the variety of enviromental test
procedures of the IEC 60068* series. Approval of conformity
is indicated by the CECC logo on the package label.
Vishay
Manufacturer" in accordance with IEC QC 001002-3,
clause 2. The release certificate for "Technology Approval
Schedule" in accordance with CECC 240001 based on
IEC QC 001002-3, clause 6 is granted for the Vishay
BEYSCHLAG manufacturing process.
SPECIALS
This product family of thin film MELF resistors is completed
by Zero Ohm Jumpers.
On request, resistors are available with established reliability
in accordance with EN 140401-803 Version E. Please refer
to the special data sheet for information on failure rate level,
available resistance ranges and ordering codes.
Note:
* The quoted IEC standards are also released as EN standards with
the same number and identical contents.
[e-mail]
BEYSCHLAG
CECC
40401-803)
has
achieved
Document Number: 28713
which
Revision: 18-Jul-06
"Approval
refers
of
to