PTCCL11H211HTE Vishay, PTCCL11H211HTE Datasheet

PTC CP LDD 10D5 A210 265 140 T E3

PTCCL11H211HTE

Manufacturer Part Number
PTCCL11H211HTE
Description
PTC CP LDD 10D5 A210 265 140 T E3
Manufacturer
Vishay
Series
662r
Type
PTCr
Datasheets

Specifications of PTCCL11H211HTE

Voltage - Max
265V
Current - Hold (ih) (max)
210mA
Current - Trip (it)
315mA
Current - Max
1.3A
Package / Case
Radial
Mounting Style
Through Hole
Pin Count
2
Screening Level
Commercial
Resistance @ 25c
17Ohm
Percentage Of Resistance Tolerance @ 25c
±20
Operating Temperature Min Deg. C
0C
Operating Temperature Max Deg. C
70C
Product Length (mm)
Not Requiredmm
Product Height (mm)
Not Requiredmm
Product Depth (mm)
5.5mm
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
R Min/max
-
Time To Trip
-
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
2322 662 52113
232266252113
BC1372
PTCCL11H211HBC
Document Number: 29087
Revision: 18-Aug-09
QUICK REFERENCE DATA
PARAMETER
Holding current
Resistance at 25 °C (R
I
Switch temperature
Maximum voltage (RMS or DC)
Operating temperature range
at max. voltage
Climatic category
max.
25
)
0.011 to 0.8
2.1 to 3000
25/125/56
0.8 to 5.5
For Overload Protection
VALUE
0 to 70
For technical questions, contact:
265 V PTC Thermistors
140
265
UNIT
°C
°C
Ω
A
A
V
FEATURES
• Wide range of trip and non-trip currents:
• Small ratio between trip and non-trip currents
• High maximum inrush current (up to 5.5 A)
• Leaded parts withstand mechanical stresses
• UL file E148885 according to XGPU standard UL1434
• UL approved PTCs are guaranteed to withstand severe
• Compliant to RoHS directive 2002/95/EC and in
APPLICATIONS
Over-temperature/over-load protection:
• Telecommunications
• Automotive systems
• Industrial electronics
• Consumer electronics
• Electronic data processing
DESCRIPTION
These
temperature coefficient and are primarily intended for
overload protection. They consist of a metallized ceramic
disk with two tinned brass or copper clad steel leads reflow
soldered to it and coated with a high temperature silicone
lacquer. Leadless disks and leaded disks without coating are
available on request.
MOUNTING
The PTC Thermistors are suitable for processing on
automatic insertion equipment.
Typical soldering
235 °C; duration: 5 s (Pb-bearing)
245 °C, duration: 5 s (Lead (Pb)-free)
Resistance to soldering heat
260 °C, duration: 10 s max.
MARKING
Only the grey lacquered thermistors with a diameter of
8.5 mm to 20.5 mm are marked with BC, R
1R9) on one side and I
From 11 mA up to 800 mA
(I
and vibration
test programs
• Long-life cycle tests (over 5000 trip cycles)
• Long-life storage tests (3000 h at 250 °C)
• Electrical cycle tests at low ambient temperatures
• Damp-heat and water immersion tests
• Overvoltage tests at up to 200 % of rated voltage
accordance to WEEE 2002/96/EC
t
2381 66. 5...3/PTCCL..H...HBE
/I
nlr@vishay.com
(- 40 °C or 0 °C)
nt
= 1.5 at 25 °C)
directly
heated
nt
Vishay BCcomponents
, V
max.
thermistors
on the other side.
have
25
value (example
www.vishay.com
a
positive
25

Related parts for PTCCL11H211HTE

PTCCL11H211HTE Summary of contents

Page 1

... Resistance to soldering heat °C 260 °C, duration max. 25/125/56 MARKING Only the grey lacquered thermistors with a diameter of 8 20.5 mm are marked with BC, R 1R9) on one side and I For technical questions, contact: nlr@vishay.com Vishay BCcomponents heated thermistors have a positive value (example the other side. nt max ...

Page 2

... Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION for 2381 66. 5...3; max. voltage = 265 V ( MAX. MIN. ± ° °C (Ω) (mA) (mA 3000 15 23 1900 19 29 1200 28 42 500 39 59 260 63 95 120 76 115 85 95 143 56 110 ...

Page 3

... D amb / = 5.40. In the typical trip-time as a function of trip current ratio graph, at the 8.5 mm 0.148 For technical questions, contact: nlr@vishay.com Vishay BCcomponents 125 150 175 200 T (°C) amb 150 V (%) rated as a function of voltage graph. ...

Page 4

... Vishay BCcomponents COMPONENTS OUTLINE CODE NUMBER 2381 660 661 662 62113 - 62513 62813 - 63213 663 664 PTC THERMISTORS IN BULK Fig. 1a PTC THERMISTORS ON TAPE ON REEL Fig. 1b TAPE AND REEL ACCORDING TO IEC 60286-2 dimensions in millimeters SYMBOL D d Pitch of components P Diameter < ...

Page 5

... Revision: 18-Aug-09 2381 66. 5...3/PTCCL..H...HBE 265 V PTC Thermistors For Overload Protection TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC 250 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC 250 TYPICAL RESISTANCE/TEMPERATURE CHARACTERISTIC 250 For technical questions, contact: nlr@vishay.com Vishay BCcomponents 2381 660 53993 PTCCL05H390HBE 5 10 2381 660 56393 PTCCL05H630HBE 4 10 ...

Page 6

... Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’ ...

Related keywords