A13KV-RO NKK Switches, A13KV-RO Datasheet

no-image

A13KV-RO

Manufacturer Part Number
A13KV-RO
Description
Toggle Switches SPDT ON-OFF-ON VERTICAL PC .4VA
Manufacturer
NKK Switches
Series
Ar
Datasheet

Specifications of A13KV-RO

Pole Throw Configuration
SPDT
Switch Configuration
ON OFF ON
Actuator Style
Paddle Toggle
Current Rating (max)
0.1A
Ac Voltage Rating (max)
28VVAC
Dc Voltage Rating (max)
28VVDC
Contact Material
Phosphor Bronze
Contact Plating
Gold
Mechanical Life
100000
Product Height (mm)
10.2mm
Product Depth (mm)
24.26mm
Operating Temperature Min Deg. C
-30C
Product Length (mm)
5.84mm
Operating Temperature Max Deg. C
85C
Mounting Style
Through Hole
Contact Form
SPDT
Switch Function
ON - OFF - ON
Contact Rating
0.4 Volt-Amp
Termination Style
Vertical PC with Bracket
Terminal Seal
Epoxy
Actuator
Snap Top for Paddle
Power Capacity (va)
0.4 Volt-Amp
Voltage Rating Ac
28 Volts
Lead Free Status / RoHS Status
Compliant
A
General
Series A
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
PCB Processing
Standards & Certifications
A4
Operating Temperature Range:
Nominal Operating Force:
Insulation Resistance:
Stationary Contacts:
Contact Resistance:
Dielectric Strength:
Movable Contact:
Support Bracket:
Mechanical Life:
Angle of Throw:
Contact Timing:
Case Housing:
Electrical Life:
Logic Level:
Soldering:
Terminals:
Vibration:
Humidity:
Cleaning:
Toggle:
Shock:
Specifications
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
50 milliohms maximum
500 megohms minimum @ 500V DC
500V AC minimum between contacts for 1 minute minimum;
500V AC minimum between contacts & case for 1 minute minimum
100,000 operations minimum for On-None-On & On-Off-On
50,000 operations minimum for other circuits
50,000 operations minimum
1.47N (momentary); 1.18N (maintained) for .394” (10.0mm) toggles
2.73N (momentary); 1.84N (maintained) for all other toggles
Nonshorting (break-before-make)
26°
Glass fiber reinforced polyamide for antistatic; nickel plated brass for all others
Glass fiber reinforced polyamide
Tin plated phosphor bronze
Phosphor bronze with gold plating
Brass with gold plating
Brass with gold plating
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
Wave Soldering Recommended. See Profile A in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Automated cleaning. See Cleaning Specifications in Supplement section.
The A Series toggles have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
www.nkk.com
Process Sealed Subminiature Toggles

Related parts for A13KV-RO

A13KV-RO Summary of contents

Page 1

... Automated cleaning. See Cleaning Specifications in Supplement section. Standards & Certifications The A Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. ...

Page 2

... Molded-in, epoxy sealed or ultrasonically welded terminals lock out flux, solvents, and other contaminants. .100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Toggle option in antistatic material available for dissipating electrostatic discharges. Matching indicators available. www.nkk.com Series A A Actual Size ...

Page 3

... Pole only) DESCRIPTION FOR TYPICAL ORDERING EXAMPLE A12JV Bat Toggle SPDT www.nkk.com Optional Caps .394” (10.0mm) Bat Lever Cap .248” (6.3mm) Bat Lever Cap Paddles Short Paddle for K Toggle Long Paddle for K Toggle Cap Paddle Colors A Black B White C ...

Page 4

... Process Sealed Subminiature Toggles Toggle Position ( ) = Momentary Up Center Pole Model Slot SP A11 OFF NONE A12 ON NONE A13 ON OFF A15 ON NONE SP A1R (ON) NONE A18 (ON) OFF A19 ON OFF A1S (ON) OFF A22 ON NONE A23 ON OFF A25 ON NONE DP A2R (ON) NONE A28 (ON) OFF ON OFF A29 (ON) ...

Page 5

... Colors Available AT467 A Short Paddle Material: Polyamide (10.3) .406 Colors Available Black White A8 Process Sealed Subminiature Toggles PC TERMINALS B Straight with Bracket (10.16) .400 (5.08) (2.54) Typ .200 .100 (5.08) (0.6) Dia Typ .200 .024 (0.3) Typ (0.7) Typ .012 ...

Page 6

... Process Sealed Subminiature Toggles (5.0) (2.6) Dia .197 (0.4) Typ .102 .016 (6.0) 26° .236 Slot (0.3) .012 (5.84) .230 (2.6) Dia (5.0) (0.4) Typ .197 .102 .016 (6.0) 26° .236 Slot (0.4) .016 (10.0) (9.2) .394 .362 (5.0) (2.6) Dia ...

Page 7

... A12AV Vertical PC (6.0) .236 Slot (0.3) Typ .012 (5.08) .200 A22AV A10 Process Sealed Subminiature Toggles TYPICAL SWITCH DIMENSIONS Single Pole 26° (2.6) Dia (6.0) Slot (0.3) .102 .236 .012 (0.7) .028 (5.08) (9.8) (10.0) (4.5) (9 ...

Related keywords