MAX13 Aavid Thermalloy, MAX13 Datasheet

Page 1

... PLEASE NOTE: Our customers are reminded that they bear the responsibility for testing Aavid Thermalloy products for proposed use. Any information furnished by Aavid Thermalloy is believed to be accurate and reliable, but our customers must bear all responsibility for use and applications of Aavid Thermalloy products. All Aavid Thermalloy products are sold subject to the Aavid Domestic Terms and Conditions of Sale in effect, a copy of which shall be furnished upon request (8911A). Copyright © ...

Page 2

How to Use this Catalog Max Extrusions Base extrusion part number For ordering information see page 3 Extrusion weight kilograms per meter 78015 • One slot for vertical mounting to board Bullet illustrates differentiating features for each Max profile Max ...

Page 3

How to Order The Max Clip System General Information: Extrusions are available in standard bar lengths of 2.5 meters/8.2 feet. Extrusions are unfinished and may be ordered with a black anodize finish. The standard tolerance of all cut to length ...

Page 4

The Max Clip System TM MINIMIZE LABOR...MAXIMIZE PERFORMANCE The Max Clip System solution that eliminates mounting holes, screws, rivets, and the thermal inefficiency associated with using loose hardware to attach components to a heat sink. This quick, robust attachment method ...

Page 5

Part Page Weight Weight Number kg/m lb/ft 78010 7 2.48 1.663 78015 7 1.38 0.925 78020 14 1.23 0.825 78025 12 0.99 0.664 78030 20 3.42 2.293 78035 8 2.53 1.697 78040 14 4.64 3.111 78045 8 1.59 1.066 78050 ...

Page 6

Max Extrusion Index Part Page Weight Number kg/m 78405 11 1.36 81400 20 5.51 82005 15 2.60 82870 10 3.09 82875 16 0.95 82880 17 1.72 82885 16 0.85 82890 16 1.40 82895 19 1.08 82900 16 1.18 82905 14 ...

Page 7

The Single Mounting Surface style provides a flat component mounting surface on one side of the profile. The back side of the extrusion is covered with fins creating additional surface area to aid in cooling. The component retaining clip interlocks ...

Page 8

The Max Clip System TM 82950 kg/m: 5.52 • One screw boss for vertical (0.236) mounting to board 42.00 (1.653) (0.342) kg/m: 2.04 • θn = 1.71 ºC/W • θf = 0.58 ºC/W 82930 • One slot for vertical mounting ...

Page 9

One slot for vertical 38.00 mounting to board (1.496) (0.188) M3 3.00 (0.118) 16.00 (0.630) kg/m: 3.45 • θn = 0.93 ºC/W • θf = 0.29 ...

Page 10

The Max Clip System kg/m: 1.49 • θn = 1.82 ºC/W • θf = 0.78 ºC/W 78375 • One screw boss for vertical mounting to board 14.00 (0.551) 10.00 3.00 (0.394) (0.118) 37.10 (1.461) 28.50 (1.122) 5.00 (0.196) 10.00 (0.394) ...

Page 11

One slot for vertical mounting to board 35.00 (1.378) 23.40 (0.921) 13.00 (0.512) 26.00 (1.024) kg/m: 1.14 • θn = 1.96 ºC/W • θf = 1.00 ...

Page 12

The Max Clip System kg/m: 1.78 • θn = 2.35 ºC/W • θf = 0.67 ºC/W 78275 • One screw boss for vertical mounting to board 28.30 (1.114) kg/m: 0.48 • θn = 4.12 ºC/W • θf = 1.68 ºC/W ...

Page 13

The Dual Mounting Surface style provides a flat component mounting surface on two sides of the profile. Some profiles allow back to back mounting of components on the circuit board permitting the sharing of a centrally mounted heat sink. Other ...

Page 14

The Max Clip System TM kg/m: 4.64 • θn = 0.81 ºC/W • θf = 0.28 ºC/W 78040 • Two slots for vertical mounting to board 102.00 (4.016) 71.20 (2.803) 6.00 (0.236) (3.189) kg/m: 1.23 • θn = 3.02 ºC/W ...

Page 15

Two screw bosses for vertical mounting to board 68.00 (2.677) 32.00 ø 2.79 (1.260) (0.110) ø 2.79 (0.110) M3 32.00 (1.260) 9.00 (0.354) 50.00 (1.969) 82005 ...

Page 16

The Max Clip System The Max Heat Connector styles include single and dual component mounting surface profiles. Max Heat Connector profiles are designed to be fastened to conventional extruded heat sink or chassis surfaces providing a thermal conduction path for ...

Page 17

One slot for vertical mounting to board 38.00 (1.496) (0.354) 22.00 (0.866) 4.77 (0.188) M3 10.00 (0.393) 20.00 (0.787) 82980 kg/m: 0.81 • Secondary operation needed for mounting to board 27.00 (1.063) 20.00 (0.787) 9.00 (0.354) ...

Page 18

The Max Clip System 78095 • Secondary operation needed for mounting to board 19.99 (0.787) 78200 kg/m: 0.89 • One screw boss for vertical mounting to board 28.00 (1.102) 8.50 (0.335) 4.00 (0.157) kg/m: 0.75 • θn = 3.11 ºC/W ...

Page 19

Single Mounting Surface with Flat Back styles feature profiles with one side dedicated to a single component mounting surface and cooling fins with a flat surface on the back side of the profile. This style is suitable in applications with ...

Page 20

The Max Clip System The U-Channel/Multiple Screw Boss section features a combination of U-Channel style and custom Max Profiles featuring multiple (2 or more) screw bosses. The U-Channel variations can accept assembled circuit cards to form the basis of a ...

Page 21

... Application of The Max Clip System™ is limited only by the imagination. The following pages illustrate some examples of custom Max Extrusions. The system’s flexibility allows the creation of shapes designed for specific thermal or mechanical system requirements. Please contact Aavid Thermalloy application engineering to discuss any of the shapes shown below or your custom application specifications. 78050 ...

Page 22

The Max Clip System 0SA79 BS014 BS070 BS105 BS202 AMERICA 22 EUROPE www.aavidthermalloy.com TM Potential Max Profiles 0SA80 BS034 BS093 BS121 USA Tel: +1 (603) 224-9988 email: info@aavid.com Italy Tel: +39 051 764011 email: sales.it@aavid.com United Kingdom Tel: +44 1793 ...

Page 23

Number ...

Page 24

The Max Clip System Number ...

Page 25

Number ...

Page 26

The Max Clip System Width Thickness Max01 0.5 14.70 (0.580) Width Thickness Max03 0.5 14.70 (0.580) Width Thickness Max07 0.6 16.50 (0.650) 22.00 (0.870) With Screws Width Thickness Max09 10 mm ...

Page 27

... Width Thickness Force Max11 0 24.70 (0.970) Width Thickness Force Max13 0 10.50 (0.410) Width Thickness Force Max15 0 13.30 (0.520) Width Thickness Force Max01 0 14.70 (0.580 High Force Width Thickness Force Max03 0 14.70 (0.580 High Force AMERICA USA Tel: +1 (603) 224-9988 email: info@aavid.com EUROPE Italy Tel: +39 051 764011 email: sales ...

Page 28

The Max Clip System TM U-Clips can be used to attach semiconductors to conventional extrusions or plates. These clips provide the necessary force to maintain proper thermal performance. Width Thickness CLP212 10 0.5 22.10 (0.870) 10.67 (0.420) 18.40 ...

Page 29

... Below are examples of Assembly Ideas, using Aavid Thermalloy’s patented Max Clip System™. The illustrations show the use of multiple extrusion profiles, fans and clips to assemble cost effective high performance thermal solutions. Please contact Aavid Thermalloy application engineering to discuss developing assembly configurations specific to your application. ...

Page 30

Semi-Automated Assembly (1) One way of optimizing The Max Clip System™ for volume manufacturing is through the use of semi-automated assembly. The Max Clip System™ is suitable for pick and place machines and the following diagrams illustrate a method for ...

Page 31

HEAT SINK LOCATING Back stop Heat sink Carriage in open position Insert carrier carriage COMPONENTS AND CLIP LOCATING Locate components and clips while carriage is in closed position Carriage in close position AMERICA USA Tel: +1 (603) 224-9988 email: info@aavid.com ...

Page 32

Chief Extrusion Profiles 78065 Indian Chief Profiles (TO-220, T0-252, TO-262) Max Indian Chief styles use a unique extrusion profile with an integrated clip. The Indian Chief shares all the advantages of The Max Clip System™ without the use of a ...

Page 33

Big Chief Profiles (TO-247, TO-218) Max Big Chief styles use a unique extrusion profile with an integrated clip. The Big Chief shares all the advantages of The Max Clip System TM without the use of a discrete clip. The ...

Page 34

Solderable Pins How to add solderable pins for easy attachment in circuit board applications The Max Clip System™ can be mounted directly to printed circuit boards by installing tin plated pins in the base of the heat sink and then ...

Page 35

2.0 1.5 1.0 0.5 50 100 150 200 250 ...

Page 36

Shock and Vibration Testing Provided by PENNY + GILES • Test Certificate No. 3318 1. TEST CONDUCTED 1.1 Sine Vibration and 1/2 Sine Shock 2. SPECIMEN DATA 2.1 No. Off: 2.2 Identification: 2.3 Reference No.(s): 2.4 Serial No.(s): 2.5 Condition ...

Page 37

Extrusion Standard Tolerances "A" "A" "A" "E" "C" "C" "D" "B" (1) for “A” Dim or “B” Dim = 300 mm tolerances supplied by customer (2) for “E” Dim = 5 mm, tolerances equal “B” “D” Dim (mm) Tolerances (mm) ...

Page 38

Notes AMERICA 38 EUROPE www.aavidthermalloy.com USA Tel: +1 (603) 224-9988 email: info@aavid.com Italy Tel: +39 051 764011 email: sales.it@aavid.com United Kingdom Tel: +44 1793 401400 email: sales.uk@aavid.com ASIA Singapore Tel: +65 6362 8388 email: sales@aavid.com.sg Taiwan Tel: +886(2) 2698-9888 email: ...

Page 39

AMERICA USA Tel: +1 (603) 224-9988 email: info@aavid.com EUROPE Italy Tel: +39 051 764011 email: sales.it@aavid.com www.aavidthermalloy.com United Kingdom Tel: +44 1793 401400 email: sales.uk@aavid.com Notes ASIA Singapore Tel: +65 6362 8388 email: sales@aavid.com.sg Taiwan Tel: +886(2) 2698-9888 email: sales@aavid.com.tw ...

Page 40

... Leading the way with the industries broadest line of standard products, Aavid Thermalloy is the most recognized heat sink manufacturer in the world. Our design capabilities extend beyond standard products and use the most advanced thermal engineering resources available to design application specific products ...