XC5VLX50T-1FFG665C Xilinx Inc, XC5VLX50T-1FFG665C Datasheet - Page 56

FPGA, VIRTEX-5 LXT, 50K, 665FCBGA

XC5VLX50T-1FFG665C

Manufacturer Part Number
XC5VLX50T-1FFG665C
Description
FPGA, VIRTEX-5 LXT, 50K, 665FCBGA
Manufacturer
Xilinx Inc
Series
Virtex™-5 LXTr

Specifications of XC5VLX50T-1FFG665C

No. Of Logic Blocks
7200
Family Type
Virtex-5
No. Of Speed Grades
1
Total Ram Bits
2211840
No. Of I/o's
360
Clock Management
DCM, PLL
I/o Supply Voltage
3.3V
Operating Frequency Max
550MHz
Number Of Logic Elements/cells
46080
Number Of Labs/clbs
3600
Number Of I /o
360
Voltage - Supply
0.95 V ~ 1.05 V
Mounting Type
Surface Mount
Operating Temperature
0°C ~ 85°C
Package / Case
665-BBGA, FCBGA
Core Supply Voltage Range
1V
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
HW-V5-ML561-UNI-G - EVALUATION PLATFORM VIRTEX-5HW-V5-ML550-UNI-G - EVALUATION PLATFORM VIRTEX-5HW-V5-ML521-UNI-G - EVALUATION PLATFORM VIRTEX-5HW-V5GBE-DK-UNI-G - KIT DEV V5 LXT GIGABIT ETHERNET122-1508 - EVALUATION PLATFORM VIRTEX-5
Number Of Gates
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
122-1565

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
XC5VLX50T-1FFG665C
Manufacturer:
Xilinx Inc
Quantity:
10 000
Part Number:
XC5VLX50T-1FFG665C
Manufacturer:
XILINX
0
Part Number:
XC5VLX50T-1FFG665C
Manufacturer:
XILINX
Quantity:
500
Part Number:
XC5VLX50T-1FFG665C
Manufacturer:
XILINX
Quantity:
5 698
Part Number:
XC5VLX50T-1FFG665C
Quantity:
2 747
Part Number:
XC5VLX50T-1FFG665C
Quantity:
18
Part Number:
XC5VLX50T-1FFG665C
0
Part Number:
XC5VLX50T-1FFG665C4060
Manufacturer:
XILINX
Quantity:
1 122
Part Number:
XC5VLX50T-1FFG665C4060
Manufacturer:
XILINX
0
Part Number:
XC5VLX50T-1FFG665CES
Manufacturer:
Xilinx Inc
Quantity:
10 000
Part Number:
XC5VLX50T-1FFG665CES
Quantity:
1 700
Chapter 2: Clock Management Technology
56
DCM Status and Data Output Ports
Locked Output - LOCKED
Phase-Shift Done Output - PSDONE
Status or Dynamic Reconfiguration Data Output - DO[15:0]
The LOCKED output indicates whether the DCM clock outputs are valid, i.e., the outputs
exhibit the proper frequency and phase. After a reset, the DCM samples several thousand
clock cycles to achieve lock. After the DCM achieves lock, the LOCKED signal is asserted
High. The DCM timing parameters section of the Virtex-5 FPGA Data Sheet provides
estimates for locking times.
To guarantee an established system clock at the end of the start-up cycle, the DCM can
delay the completion of the device configuration process until after the DCM is locked. The
STARTUP_WAIT attribute activates this feature. The
description provides further information.
Until the LOCKED signal is asserted High, the DCM output clocks are not valid and can
exhibit glitches, spikes, or other spurious movement. In particular, the CLK2X output
appears as a 1x clock with a 25/75 duty cycle.
The phase-shift done (PSDONE) output signal is synchronous to PSCLK. At the
completion of the requested phase shift, PSDONE pulses High for one period of PSCLK.
This signal also indicates a new change to the phase shift can be initiated. The PSDONE
output signal is not valid if the phase-shift feature is not being used or is in fixed mode.
The DO output bus provides DCM status or data output when using dynamic
reconfiguration
available in the Dynamic Reconfiguration chapter of the Virtex-5 FPGA Configuration Guide
for more information.
If the dynamic reconfiguration port is not used, using DCM_BASE instead of DCM_ADV
is strongly recommended.
Table 2-4: DCM Status Mapping to DO Bus
DO[0]
DO[1]
DO[2]
DO Bit
Phase-shift overflow
CLKIN stopped
CLKFX stopped
(Table
Status
2-4). Further information on using DO as the data output is
www.xilinx.com
Asserted when the DCM is phase-shifted beyond the
allowed phase-shift value or when the absolute delay
range of the phase-shift delay line is exceeded. DO[0] is
deasserted if the phase shift feature is not used
(CLKOUT_PHASE_SHIFT=NONE).
Asserted when the input clock is stopped (CLKIN
remains High or Low for one or more clock cycles).
When CLKIN is stopped, the DO[1] CLKIN stopped
status is asserted within nine CLKIN cycles. When
CLKIN is restarted, CLK0 starts toggling and DO[1] is
deasserted within nine clock cycles.
Asserted when CLKFX stops. The DO[2] CLKFX
stopped status is asserted within 260 cycles after
CLKFX stopped. CLKFX does not resume, and DO[2] is
not deasserted until the DCM is reset. DO[2] is
deasserted if the CLKFX/CLKFX180 output is not used.
STARTUP_WAIT Attribute
Description
Virtex-5 FPGA User Guide
UG190 (v5.3) May 17, 2010

Related parts for XC5VLX50T-1FFG665C