PIC16F1829-E/P Microchip Technology, PIC16F1829-E/P Datasheet - Page 215

• Manufacturer Part Number: PIC16F1829-E/P
• Description: 14 KB Flash, 1K Bytes RAM, 32 MHz Int. Osc, 18 I/0, Enhanced Mid Range Core 20 P
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ mTouch™ 16Fr

Specifications of PIC16F1829-E/P

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 17
• Program Memory Size: 14KB (8K x 14)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: *
• Processor Series: PIC16F182x
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 18
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: Through Hole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

24.0
The Capture/Compare/PWM module is a peripheral
which allows the user to time and control different
events, and to generate Pulse-Width Modulation
(PWM) signals. In Capture mode, the peripheral allows
the timing of the duration of an event. The Compare
mode allows the user to trigger an external event when
a predetermined amount of time has expired. The
PWM mode can generate Pulse-Width Modulated
signals of varying frequency and duty cycle.
This family of devices contains two Enhanced Capture/
Compare/PWM modules (ECCP1 and ECCP2) and two
standard Capture/Compare/PWM modules (CCP3 and
CCP4).
The Capture and Compare functions are identical for all
four CCP modules (ECCP1, ECCP2, CCP3 and
CCP4). The only differences between CCP modules
are in the Pulse-Width Modulation (PWM) function. The
standard PWM function is identical in modules, CCP3
and CCP4. In CCP modules ECCP1 and ECCP2, the
Enhanced PWM function has slight variations from one
another. Full-Bridge ECCP modules have four
available I/O pins while Half-Bridge ECCP modules
only have two available I/O pins. See
more information.
TABLE 24-1:
 2010 Microchip Technology Inc.
PIC16F/LF1825/1829
Device Name
CAPTURE/COMPARE/PWM
MODULES
PWM RESOURCES
Enhanced PWM
Full-Bridge
ECCP1
Table 24-1
Preliminary
for
Enhanced PWM
Half-Bridge
ECCP2
PIC16F/LF1825/1829
Note 1: In devices with more than one CCP
2: Throughout
module, it is very important to pay close
attention to the register names used. A
number placed after the module acronym
is used to distinguish between separate
modules. For example, the CCP1CON
and
operational aspects of two completely
different CCP modules.
references to a CCP module in any of its
operating modes may be interpreted as
being equally applicable to ECCP1,
ECCP2, CCP3 and CCP4. Register
names, module signals, I/O pins, and bit
names may use the generic designator ‘x’
to indicate the use of a numeral to
distinguish a particular module, when
required.
Standard PWM
CCP3
CCP2CON
this
control
section,
Standard PWM
DS41440A-page 217
CCP4
the
generic
same