PIC24FJ64GB002-I/SS Microchip Technology, PIC24FJ64GB002-I/SS Datasheet - Page 218

• Manufacturer Part Number: PIC24FJ64GB002-I/SS
• Description: 16-bit, 16 MIPS, 64KB Flash, 8KB RAM, Nanowatt XLP, USB OTG 28 SSOP .209in TUBE
• Manufacturer: Microchip Technology

Specifications of PIC24FJ64GB002-I/SS

• Processor Series: PIC24
• Core: PIC24F
• Data Bus Width: 16 bit
• Program Memory Type: Flash
• Program Memory Size: 64 KB
• Data Ram Size: 8192 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: SSOP-28
• Development Tools By Supplier: MPLAB Integrated Development Environment
• Minimum Operating Temperature: - 40 C
• Operating Temperature Range: - 40 C to + 85 C
• Supply Current (max): 300 mA
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24FJ64GB004 FAMILY
REGISTER 18-8:
DS39940D-page 218
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-8
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
R-x, HSC
JSTATE
U-0
—
Unimplemented: Read as ‘0’
JSTATE: Live Differential Receiver J State Flag bit
1 = J state (differential ‘0’ in low speed, differential ‘1’ in full speed) is detected on the USB
0 = No J state was detected
SE0: Live Single-Ended Zero Flag bit
1 = Single-ended zero is active on the USB bus
0 = No single-ended zero is detected
TOKBUSY: Token Busy Status bit
1 = Token is being executed by the USB module in On-The-Go state
0 = No token is being executed
USBRST: Module Reset bit
1 = USB Reset has been generated; for software Reset, application must set this bit for 50 ms, then
0 = USB Reset is terminated
HOSTEN: Host Mode Enable bit
1 = USB host capability is enabled; pull-downs on D+ and D- are activated in hardware
0 = USB host capability is disabled
RESUME: Resume Signaling Enable bit
1 = Resume signaling activated; software must set bit for 10 ms and then clear to enable remote wake-up
0 = Resume signaling disabled
PPBRST: Ping-Pong Buffers Reset bit
1 = Reset all Ping-Pong Buffer Pointers to the EVEN BD banks
0 = Ping-Pong Buffer Pointers are not reset
SOFEN: Start-of-Frame Enable bit
1 = Start-of-Frame token is sent every one 1 millisecond
0 = Start-of-Frame token is disabled
R-x, HSC
SE0
clear it
U-0
—
U1CON: USB CONTROL REGISTER (HOST MODE ONLY)
U = Unimplemented bit, read as ‘0’
W = Writable bit
‘1’ = Bit is set
TOKBUSY
R/W-0
U-0
—
USBRST
R/W-0
U-0
—
HSC = Hardware Settable/Clearable bit
‘0’ = Bit is cleared
HOSTEN
R/W-0
U-0
—
RESUME
R/W-0
U-0
—
 2010 Microchip Technology Inc.
x = Bit is unknown
PPBRST
R/W-0
U-0
—
SOFEN
R/W-0
U-0
—
bit 8
bit 0