PIC24FJ64GB002-I/SS Microchip Technology, PIC24FJ64GB002-I/SS Datasheet - Page 227

• Manufacturer Part Number: PIC24FJ64GB002-I/SS
• Description: 16-bit, 16 MIPS, 64KB Flash, 8KB RAM, Nanowatt XLP, USB OTG 28 SSOP .209in TUBE
• Manufacturer: Microchip Technology

Specifications of PIC24FJ64GB002-I/SS

• Processor Series: PIC24
• Core: PIC24F
• Data Bus Width: 16 bit
• Program Memory Type: Flash
• Program Memory Size: 64 KB
• Data Ram Size: 8192 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Operating Supply Voltage: 2 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: SSOP-28
• Development Tools By Supplier: MPLAB Integrated Development Environment
• Minimum Operating Temperature: - 40 C
• Operating Temperature Range: - 40 C to + 85 C
• Supply Current (max): 300 mA
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 18-19: U1EIR: USB ERROR INTERRUPT STATUS REGISTER
 2010 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-8
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
R/K-0, HS
Note:
BTSEF
U-0
—
Individual bits can only be cleared by writing a ‘1’ to the bit position as part of a word write operation on the
entire register. Using Boolean instructions or bitwise operations to write to a single bit position will cause
all set bits at the moment of the write to become cleared.
Unimplemented: Read as ‘0’
BTSEF: Bit Stuff Error Flag bit
1 = Bit stuff error has been detected
0 = No bit stuff error
Unimplemented: Read as ‘0’
DMAEF: DMA Error Flag bit
1 = A USB DMA error condition detected
0 = No DMA error
BTOEF: Bus Turnaround Time-out Error Flag bit
1 = Bus turnaround time-out has occurred
0 = No bus turnaround time-out
DFN8EF: Data Field Size Error Flag bit
1 = Data field was not an integral number of bytes
0 = Data field was an integral number of bytes
CRC16EF: CRC16 Failure Flag bit
1 = CRC16 failed
0 = CRC16 passed
For Device mode:
CRC5EF: CRC5 Host Error Flag bit
1 = Token packet rejected due to CRC5 error
0 = Token packet accepted (no CRC5 error)
For Host mode:
EOFEF: End-Of-Frame Error Flag bit
1 = End-Of-Frame error has occurred
0 = End-Of-Frame interrupt disabled
PIDEF: PID Check Failure Flag bit
1 = PID check failed
0 = PID check passed. Individual bits can only be cleared by writing a ‘1’ to the bit position as part of
the number of received bytes. The received data is truncated.
a word write operation on the entire register. Using Boolean instructions or bitwise operations to
write to a single bit position will cause all set bits at the moment of the write to become cleared.
U-0
U-0
—
—
U = Unimplemented bit, read as ‘0’
K = Write ‘1’ to clear bit
‘1’ = Bit is set
R/K-0, HS
DMAEF
U-0
—
R/K-0, HS
BTOEF
U-0
PIC24FJ64GB004 FAMILY
—
; t
he data size indicated by the BD byte count field is less than
HS = Hardware Settable bit
‘0’ = Bit is cleared
R/K-0, HS
DFN8EF
U-0
—
R/K-0, HS
CRC16EF
U-0
—
x = Bit is unknown
R/K-0, HS
CRC5EF
EOFEF
U-0
—
DS39940D-page 227
R/K-0, HS
PIDEF
U-0
—
bit 8
bit 0