SLCF2GBJIU-F STEC, SLCF2GBJIU-F Datasheet

no-image

SLCF2GBJIU-F

Manufacturer Part Number
SLCF2GBJIU-F
Description
Manufacturer
STEC
Type
CompactFlashr
Datasheet

Specifications of SLCF2GBJIU-F

Density
2GByte
Operating Supply Voltage (typ)
3.3/5V
Operating Temperature (min)
-40C
Operating Temperature (max)
85C
Package Type
Not Required
Mounting
Socket
Pin Count
50
Operating Temperature Classification
Industrial
Operating Supply Voltage (min)
3.18/4.75V
Operating Supply Voltage (max)
3.465/5.25V
Programmable
Yes
Lead Free Status / RoHS Status
Compliant
Web:
ORDERING INFORMATION
CompactFlash
Part Number*
• SLCF128J(I) ........................ Type I ....................... 128 MBytes
• SLCF256J(I) ........................ Type I ....................... 256 MBytes
• SLCF512J(I) ........................ Type I ....................... 512 MBytes
• SLCF1GBJ(I) ....................... Type I ........................... 1 GBytes
• SLCF2GBJ(I) ....................... Type I ........................... 2 GBytes
• SLCF3GBJ(I) ....................... Type I ........................... 3 GBytes
• SLCF4GBJ(I) ....................... Type I ........................... 4 GBytes
• SLCF5GBJ(I) ....................... Type I ........................... 5 GBytes
• SLCF6GBJT2(I) ................. Type II .......................... 6 GBytes
• SLCF7GBJT2(I) ................. Type II .......................... 7 GBytes
• SLCF8GBJT2(I) ................. Type II ........................ 8 GBytesII
128 MB to 8 GB CompactFlash Cards
FEATURES
• CFA 2.0 and ATA-4 Compatibility
• Support for PCMCIA I/O, Memory and True-IDE
• 128MB to 8GB Capacities
• Form Factors: CompactFlash Type I (SLCFxxxJ(I)) and
• Endurance Guarantee of 2,000,000 Write/Erase Cycles
• CIS (Card Information Structure) Programmed into 256
• Compatible with PC Card and Socket Services
• 5V or 3.3V Power Supply
• Completely Solid-State (No Moving Parts)
• Available in Commercial and Industrial Operating
• Standard ECC Engine
• 7 Year Warranty
Interfaces
CompactFlash Type II (SLCFxxxJT2(I))
Bytes of Internal Memory
(Release 2.1 or later)
Temperature Ranges
www.simpletech.com
CF Form Factor
Capacity
Document Part Number 61000-02805-111 March 2005
GENERAL DESCRIPTION
The SimpleTech SLCFxxxJ(T2)(I) are CompactFlash Cards
with 128MB to 8GB of nonvolatile storage. The SLCFxxxJ(I)
cards are Type I CompactFlash Cards, and the SLCFxxxJT2(I)
cards are Type II CompactFlash Cards. The cards use a flash
memory controller that provides a fully compatible
CompactFlash interface for the flash memory.
SimpleTech OEM CompactFlash cards are the product of
choice in applications requiring high reliability and high
tolerance to shock, vibration, humidity, altitude, and
temperature. Because there are no moving parts to service or
maintain, CompactFlash cards are reliable alternatives to
mechanical hard disk drives for high availability and mission
critical applications.
While the inherent ruggedness and reliability of solid state
storage relative to rotating hard drives is intuitive, new
applications for OEM CompactFlash cards are emerging due
to the low cost per usable megabyte. Most applications using
embedded operating systems such as VxWorks™, Windows
XP/embedded™, and Linux™ don’t have multi-gigabyte
data storage requirements, and therefore a cost savings can
be realized when using this robust media.
Adapters
Part Number
• SLCFAD ................... Type I .......................................... Type II
• SLCFADII ...... Type I or Type II ................................... Type
*
Custom capacities available.
An “I” suffix added to the part number selects the
Industrial Operating Temperature range option. A part
number without the “I” suffix selects the Commercial
Operating Temperature range option.
An “-F” suffix, that is SLCFxxxJ(T2)(I)-F, provides the
media set to fixed storage for non-removable IDE
applications. Some operating systems, such as Windows
XP, require the storage media to be identified as a fixed
drive before the storage media can be used as a bootable
drive. SimpleTech offers the “-F” cards for these
applications.
CF Form Factor
SLCFxxxJ(T2)(I)
PC Card Form Factor
Page 1

Related parts for SLCF2GBJIU-F

SLCF2GBJIU-F Summary of contents

Page 1

... The SimpleTech SLCFxxxJ(T2)(I) are CompactFlash Cards with 128MB to 8GB of nonvolatile storage. The SLCFxxxJ(I) cards are Type I CompactFlash Cards, and the SLCFxxxJT2(I) cards are Type II CompactFlash Cards. The cards use a flash memory controller that provides a fully compatible CompactFlash interface for the flash memory. ...

Page 2

SLCFxxxJ(T2)(I) PACKAGE DIMENSIONS AND PIN LOCATIONS CompactFlash Type I Length .......................................... 1.433±.006 in (36.4±0.15 mm) Width .......................................... 1.685±.004 in (42.80±0.10 mm) Thickness (Type I) ........................... .130±.004 in (3.3±0.10 mm) (including Label Area) .063 .002 .130 .004 ...

Page 3

SLCFxxxJ(T2)(I) PACKAGE DIMENSIONS AND PIN LOCATIONS CompactFlash Type II Length .......................................... 1.433±.006 in (36.4±0.15 mm) Width .......................................... 1.685±.004 in (42.80±0.10 mm) Thickness (Type II) ................................. .197 in (5.00 mm) max (including Label Area) .063 .002 (continued ...

Page 4

SLCFxxxJ(T2)(I) PACKAGE DIMENSIONS AND PIN LOCATIONS Adapter for CompactFlash Type I and Card Type II (Typical) Length .................. 3.370±.008 in (85.6±0.20 mm) Width .................... 2.126±.004 in (54.0±0.10 mm) Thickness ............ .1968 in max. (5.0 mm max.) (continued) ...

Page 5

SLCFxxxJ(T2)(I) PIN ASSIGNMENTS PC Card Memory Mode PC Card I/O Mode Pin Signal Pin Pin Num Name Type Num 1 GND Ground 1 2 D03 I D04 I D05 I D06 I ...

Page 6

SLCFxxxJ(T2)(I) PINOUT OF THE PC CARD TO CF ADAPTER Pin PC Card 1 GND 2 D03 3 D04 4 D05 5 D06 6 D07 7 -CE1 8 A10 9 - A09 12 A08 -WE 16 ...

Page 7

SLCFxxxJ(T2)(I) SIGNAL DESCRIPTIONS Signal Name Dir BVD2 I/O (PC Card Memory Mode) -SPKR (PC Card I/O Mode) -DASP (True IDE Mode) -CD1, -CD2 O 26, 25 (PC Card Memory Mode) -CD1, -CD2 (PC Card I/O Mode) -CD1, -CD2 (True IDE ...

Page 8

SLCFxxxJ(T2)(I) SIGNAL DESCRIPTIONS Signal Name Dir -OE I (PC Card Memory Mode) -OE (PC Card I/O Mode) -OE (True IDE Mode) RDY/-BSY O (PC Card Memory Mode) -IREQ (PC Card I/O Mode) INTRQ (True IDE Mode) A10- 10, ...

Page 9

SLCFxxxJ(T2)(I) SIGNAL DESCRIPTIONS Signal Name Dir -CSEL I (PC Card Memory Mode) -CSEL (PC Card I/O Mode) -CSEL (True IDE Mode) -REG I (PC Card Memory Mode) Attribute Memory Select -REG (PC Card I/O Mode) Not Used (True IDE Mode) ...

Page 10

SLCFxxxJ(T2)(I) SIGNAL DESCRIPTIONS Signal Name Dir -WAIT O (PC Card Memory Mode) -WAIT (PC Card I/O Mode) IORDY (True IDE Mode) GND — (PC Card Memory Mode) GND (PC Card I/O Mode) GND (True IDE Mode) VCC — 13, 38 ...

Page 11

SLCFxxxJ(T2)(I) ABSOLUTE MAXIMUM RATINGS Parameter Voltage on any pin w.r.t. Vss Storage Temperature range RECOMMENDED OPERATING CONDITIONS Parameter Commercial operating temperature Industrial operating temperature VCC voltage PERFORMANCE Item Data Transfer Rate To/From Host Sustained Read Sustained Write RELIABILITY Item Data ...

Page 12

SLCFxxxJ(T2)(I) DC CHARACTERISTICS-1 temperature parts; VCC=3.3V +5% or -3.6%) Symbol Parameter VIL Input LOW Voltage VIH Input HIGH Voltage VOL Output LOW Voltage VOH Output HIGH Voltage ICC Operating Current Sleep mode Operating ILI Input Leakage Current ILO Output Leakage ...

Page 13

SLCFxxxJ(T2)(I) DC CHARACTERISTICS-2 temperature parts; VCC=5V±5%) Symbol Parameter VIL Input LOW Voltage VIH Input HIGH Voltage VOL Output LOW Voltage VOH Output HIGH Voltage ICC Operating Current, VCC=5.0V Sleep mode Operating ILI Input Leakage Current ILO Output Leakage Current CI/O ...

Page 14

SLCFxxxJ(T2)(I) AC CHARACTERISTICS temperature parts; VCC=5V±5% or VCC=3.3V +5% or -3.6%) Attribute Memory Read AC Characteristics Item Read Cycle Time Address Access Time Card Enable Access Time Output Enable Access Time Output Disable Time from -CE Output Disable Time from ...

Page 15

SLCFxxxJ(T2)(I) AC CHARACTERISTICS Attribute Memory Write AC Characteristics Item Write Cycle Time Write Pulse Width Address Setup Time Address Setup Time (-WE) -CE Setup Time (-WE) Data Setup Time (-WE) Data Hold Time Write Recovery Time Output Disable Time (-WE) ...

Page 16

SLCFxxxJ(T2)(I) AC CHARACTERISTICS Attribute Memory Write Timings A0 to A10 -REG -WE -CE2/-CE1 -OE Din (continued) tc(W) tsu(A) tw(WE) tsu(D-WEH) Data In Valid Document Part Number 61000-02805-111 March 2005 COMPACTFLASH trec(WE) th(D) (continued) Page 16 ...

Page 17

SLCFxxxJ(T2)(I) AC CHARACTERISTICS I/O Access Read AC Characteristics Item Data Delay after -IORD Data Hold following -IORD -IORD Width Time Address Setup before -IORD Address Hold following -IORD -CE Setup before -IORD -CE Hold following -IORD -REG Setup before -IORD ...

Page 18

SLCFxxxJ(T2)(I) AC CHARACTERISTICS I/O Access Read Timings A0 to A10 -REG -CE2/-CE1 -IORD -INPACK -IOIS16 tdfIOIS16(ADR D15 (continued) tsuA(IORD) tsuREG(IORD) tsuCE(IORD) tw(IORD) tdfINPACK(IORD) td(IORD) -WE, -OE, -IOWR: High Fix Document Part Number 61000-02805-111 March 2005 COMPACTFLASH thA(IORD) thREG(IORD) ...

Page 19

SLCFxxxJ(T2)(I) AC CHARACTERISTICS I/O Access Write AC Characteristics Item Data Setup before -IOWR Data Hold following -IOWR -IOWR Width Time Address Setup before -IOWR Address Hold following -IOWR -CE Setup before -IOWR -CE Hold following -IOWR -REG Setup before -IOWR ...

Page 20

SLCFxxxJ(T2)(I) AC CHARACTERISTICS Register Access AC Characteristics for True IDE Parameter Cycle time (min) Address valid to -IORD/-IOWR (min) setup -IORD/-IOWR pulse width 8bit (min) -IORD/-IOWR recovery time (min) -IOWR data setup (min) -IOWR data hold (min) -IORD data setup ...

Page 21

SLCFxxxJ(T2)(I) AC CHARACTERISTICS True IDE Mode Access Read/Write Timings ADDR valid -IORD/-IOWR D15 to D0 (Write) D15 to D0 (Read) -IOIS16 IORDY (continued Document Part Number 61000-02805-111 March 2005 COMPACTFLASH t8 t9 t2i t4 ...

Page 22

SLCFxxxJ(T2)(I) HOST ACCESS SPECIFICATION Attribute Access Specifications The CIS can be accessed by Byte/Word/Odd-byte modes which are defined by CF card standard specifications. The -REG signal must be low when accessing the CIS. Attribute Read Access Mode Function Mode -REG ...

Page 23

SLCFxxxJ(T2)(I) Task File Register Access Specifications There are two cases of Task File register mapping, one is the mapped I/O address area, the other is mapped Memory address area. Task File register read and write operations are described in the ...

Page 24

SLCFxxxJ(T2)(I) Memory Address Map Task File Register Read Access Mode Mode -REG -CE2 Standby Mode x H Byte Access (8 bit Word Access (16-bit Odd Byte Access (8-bit ...

Page 25

SLCFxxxJ(T2)(I) True IDE Mode The card is configured in a True IDE mode of operation when the -OE input signal is asserted GND by the host at power up. In the True IDE mode, Attribute Registers are not accessible from ...

Page 26

SLCFxxxJ(T2)(I) CIS INFORMATION (TYPICAL) ------- 0000: Code 01, link -------- Tuple CISTPL_DEVICE (01), length 3 (03) at offset 0 Device type is FUNCSPEC Device speed is 250ns Write protect switch is not in control Device size ...

Page 27

SLCFxxxJ(T2)(I) -------- 0037: Code 1A, link -------- Tuple CISTPL_CONFIG (1A), length 5 (05) at offset 37 Last valid configuration index is 3 Configuration Register Base Address is 200 Configuration Registers Present: Configuration Option Register ...

Page 28

SLCFxxxJ(T2)(I) 0064: Code 1B, link -------- Tuple CISTPL_CFTABLE_ENTRY (1B), length 15 (0F) at offset 64 Configuration Table Index is 02 (default) Interface type is ...

Page 29

SLCFxxxJ(T2)(I) CONFIGURATION REGISTER SPECIFICATION This card supports four configuration registers for the purpose of the configuration and observation of the card. These registers can be used in memory card mode and I/O card mode. In True IDE mode, these registers ...

Page 30

SLCFxxxJ(T2)(I) Configuration and Status Register (Address 202h) This register is used for observing the card state. bit7 bit6 bit5 CHGED SIGCHG IOIS8 Initial Value: 00h Name R/W Function CHGED (CARD->) R This bit indicates that CRDY/-BSY bit on Pin Replacement ...

Page 31

SLCFxxxJ(T2)(I) Pin Replacement Register (Address 204h) This register is used for providing the signal state of -IREQ when the card is configured as the I/O card interface. bit7 bit6 bit5 0 0 CRDY/-BSY CWProt Initial Value: 0Ch Name R/W Function ...

Page 32

SLCFxxxJ(T2)(I) TASK FILE REGISTER SPECIFICATION These registers are used for reading and writing data to the card. These registers are mapped four types by the configuration of INDEX in Configuration Option register. A fifth mapping, True IDE, is configured at ...

Page 33

SLCFxxxJ(T2)(I) Contiguous I/O Map (INDEX=1) -REG A10- ...

Page 34

SLCFxxxJ(T2)(I) Secondary I/O Map (INDEX=3) -REG A10 A9- 17h 0 X 17h 0 X 17h 0 X 17h 0 X 17h 0 X 17h 0 X 17h 0 X 17h 0 X 37h 0 X 37h True IDE ...

Page 35

SLCFxxxJ(T2)(I) Data Register The Data Register bit read/write register used for transferring data between the card and the host. This register can be accessed in word mode and byte mode. bit15 bit14 bit13 bit12 bit11 bit10 Error ...

Page 36

SLCFxxxJ(T2)(I) Sector Count Register This register contains the numbers of sectors of data requested to be transferred on a read or write operation between the host and the card. If the value in the register count of ...

Page 37

SLCFxxxJ(T2)(I) Drive/Head Register This register select the device address translation (CHS or LBA) and provides head address (CHS) or high order address bits 27:24 for LBA. bit7 bit6 bit5 bit4 1 LBA 1 DRV bit Name LBA ...

Page 38

SLCFxxxJ(T2)(I) Status Register This read only register indicates status of a command execution. When the BSY bit is “0”, the other bits are valid; when the BSY bit is “1”, the other bits are not valid. When the register is ...

Page 39

SLCFxxxJ(T2)(I) Device Control Register This write only register is used for controlling the interrupt request and issuing an ATA soft reset to the card. bit7 bit6 bit5 bit4 bit Name 7 SRST ...

Page 40

SLCFxxxJ(T2)(I) ATA COMMAND SPECIFICATIONS This table with the following paragraphs summarizes the ATA command set. No. Command set 1 Check Power Mode 2 Execute Drive Diagnostic 3 Erase Sector(s) 4 Format Track 5 Identify Drive 6 Idle 7 Idle Immediate ...

Page 41

SLCFxxxJ(T2)(I) Check Power Mode (code: E5h or 98h) This command checks the power mode. Execute Drive Diagnostic (code: 90h) This command performs the internal diagnostic tests implemented by the card. See ERROR register for dianostic codes. Erase Sector(s) (code: C0h) ...

Page 42

SLCFxxxJ(T2)(I) Identify Drive Information (continued) (Serial Number, Firmware Revision, and Model Number) Serial Number Format (typical): Words 10-19 SimpleTech Proprietary Yr Day STI_J13C0 04 224 Firmware Revision: Words 23-26 mm/dd/yy Model Number: Words 27-46 STI Flash X.Y.Z Idle (code: E3h ...

Page 43

SLCFxxxJ(T2)(I) Seek (code: 7Xh) This command is effectively a NOP command to the Card although it does perform a range check. Set Features (code: EFh) This command is used by the host to establish or select certain features. Feature 01H ...

Page 44

SLCFxxxJ(T2)(I) Write Sector(s) (code: 30h or 31h) This command writes from 1 to 256 sectors as specified in the Sector Count register. A sector count of zero requests 256 sectors. The transfer begins at the sector specified in the Sector ...

Page 45

SLCFxxxJ(T2)(I) SECTOR TRANSFER PROTOCOL Sector Read One sector read procedure after the card is configured to I/O interface is shown in the following charts. Set the cylinder low/high register Set the head no. of drive head register Set the sector ...

Page 46

SLCFxxxJ(T2)(I) Sector Write One sector write procedure after the card is configured to I/O interface is shown in the following charts. Set the cylinder low/high register Set the head no. of drive head register Set the sector number register Set ...

Page 47

SLCFxxxJ(T2)(I) REVISION HISTORY Rev. Change Description from Previous Revision -101 1/1/04. Initial Release. -102 2/23/04. Sleep mode current at 3.3V corrected to 80µA from 80mA. The operating current at 3.3V corrected to 30mA from 3mA. -103 2/23/04. IOL/IOH condition at ...

Related keywords