MT45W1MW16BDGB-701 IT Micron Technology Inc, MT45W1MW16BDGB-701 IT Datasheet - Page 9

• Manufacturer Part Number: MT45W1MW16BDGB-701 IT
• Manufacturer: Micron Technology Inc

Specifications of MT45W1MW16BDGB-701 IT

• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Mounting: Surface Mount
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Compliant

Part Numbering Information
Figure 3:
Valid Part Number Combinations
Device Marking
PDF: 09005aef81cb58ed/Source: 09005aef81c7a667
16mb_burst_cr1_0_p23z_2.fm - Rev. H 4/08 EN
45 = PSRAM/CellularRAM Memory
Operating Core Voltage
W = 1.7–1.95V
Address Locations
M = Megabits
Operating Voltage
W = 1.7–3.6V (see Note 1)
Bus Configuration
16 = x16
READ/WRITE Operation Mode
BD = Asynchronous/Page/Burst
Micron Technology
Product Family
Part Number Chart
Package Codes
GB = VFBGA “green” (6 x 9 grid, 0.75mm pitch, 6.0mm x 8.0mm x 1.0mm) 54-ball
Notes:
Micron CellularRAM devices are available in several different configurations and densi-
ties (see Figure 3).
1. 3.6V I/O and –30°C exceed the CellularRAM Workgroup 1.0 specifications.
After building the part number from the part numbering chart above, visit to the Micron
Part Marking Decoder Web site at
number is offered and valid. If the device required is not on this list, contact the factory.
Due to the size of the package, the Micron standard part number is not printed on the
top of the device. Instead, an abbreviated device mark comprised of a five-digit alphanu-
meric code is used. The abbreviated device marks are cross-referenced to the Micron
part numbers at www.micron.com/partsearch. To view the location of the abbreviated
mark on the device, refer to customer service note, CSN-11, “Product Mark/Label” at
www.micron.com/csn.
MT 45 W 1M W 16
16Mb: 1 Meg x 16 Async/Page/Burst CellularRAM 1.0 Memory
BD GB -70
9
www.micron.com/partsearch
8
Micron Technology, Inc., reserves the right to change products or specifications without notice.
WT ES
Part Numbering Information
Production Status
Blank = Production
ES = Engineering Sample
MS = Mechanical Sample
Operating Temperature
WT = –30°C to +85°C (see Note 1)
IT = –40°C to +85°C (contact factory)
Standby Power Options
Blank = Standard
Frequency
8 = 80 MHz
1 = 104 MHz
Access/Cycle Time
70 = 70ns
©2005 Micron Technology, Inc. All rights reserved.
to verify that the part