PC3SD12YVZAF Sharp Electronics, PC3SD12YVZAF Datasheet - Page 12

• Manufacturer Part Number: PC3SD12YVZAF
• Manufacturer: Sharp Electronics

Specifications of PC3SD12YVZAF

• Number Of Elements: 1
• Forward Voltage: 1.4V
• Repetitive Peak Off-state Volt: 600V
• Operating Temp Range: -30C to 100C
• Output Current: 100mA
• Package Type: PDIP
• Reverse Breakdown Voltage: 6V
• Mounting: Through Hole
• Pin Count: 5
• Trigger Current: 10mA
• Zero Crossing Circuit: No
• Operating Temperature Classification: Commercial
• Forward Current: 50mA
• Output Device: Triac
• Isolation Voltage: 5000Vrms
• Lead Free Status / RoHS Status: Compliant

● Cleaning instructions
● Presence of ODC
Solvent cleaning :
Ultrasonic cleaning :
Recommended solvent materials :
Solvent temperature should be 45˚C or below. Immersion time should be 3minutes or less.
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol.
In case the other type of solvent materials are intended to be used, please make sure they work fine in
actual using conditions since some materials may erode the packaging resin.
This product shall not contain the following materials.
And they are not used in the production process for this device.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
12
PC3SD12NTZ Series
Sheet No.: D2-A07701EN