171662-1 TE Connectivity, 171662-1 Datasheet - Page 14

• Manufacturer Part Number: 171662-1
• Description: E-J MK-2 070 REC CONT
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: 070r

Specifications of 171662-1

• Gender: RCP
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Pitch (mm): Not Requiredmm
• Contact Material: Brass
• Operating Temp Range: -30C to 105C
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Pre-Tin
• Product Height (mm): 3.6mm
• Product Depth (mm): 5.4mm
• Product Length (mm): 16.5mm
• Product Line: Econoseal J
• Product Type: Contact
• Wire/cable Type: Discrete Wire
• Cable Type: Thin Wall
• Termination Method To Wire/cable: Crimp
• Wire/cable Size (awg): 16 – 20
• Wire/cable Size (mm²): 0.5 – 1.25
• Wire Type: Stranded
• Contact Type: Socket
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Pre-Tin
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.76 [29.92]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 2.00 – 2.60 [0.079 – 0.102]
• Application Use: Wire-to-Wire
• Contact Transmits (typical Application): Power
• Packaging Method: Reel
• Packaging Quantity: 6000
• Lead Free Status / RoHS Status: Compliant

14
AMP Sealed Connectors
A
Contacts
Wire Seals And Cavity
Plugs
Connector Housings
.250 Series FASTON
contacts.
Tab and receptacle
contacts are made from
pre-tin plated brass.
Wire range 0.5 - 3.0 mm
[#20 - #12] AWG.
Lanceless contact design to
reduce tangling.
Made from silicon rubber.
Wire seals and contacts
crimped simultaneously
For wire insulation
diameters of 1.6 - 3.4 mm
[0.063 - 0.134 in.]
Housings and double lock
plates are made from
nylon.
Available in 2, 4, or 8
position versions.
Each connector housing
requires a loose piece
secondary lock (sold
separately).
Audible click helps insure
proper mating.
Protected locking lever
AMP Technical Support Center/AMP FAX Service
1-800-522-6752 717-986-7777
2
AMP Sealed Connectors
Econoseal III ... 250 Series, Wire To Wire Connectors
A high current version of
the Econoseal J Series
[Mark II+] connector, this
Econoseal III product family
incorporates many of the
basic housing and
secondary lock plate
features found in the
Econoseal J Series [Mark
II+] connector, with the
current carrying capacity of
the 250 Series FASTON
contact family.
Waterproof protection is
achieved via a silicon
rubber wire seal which is
inserted onto the wire and
crimped simultaneously
with the insulation support
of the contact. Plug
(receptacle) housings
include a factory installed
silicon
rubber interface seal.
Cavity plugs are available
to seal contact positions
on the connector which are
not used.
Each connector housing
requires the use of a
secondary lock plate which
is sold separately.
The lock plate is inserted
into the connector housing
after the contacts have
been loaded. The
secondary lock helps to
detect partially mated
contacts, increases contact
retention, and helps prevent
contact damage during
contact mating and
unmating.
All sealed surfaces are
located inside the
connector housings to help
prevent possible damage
during handling.
Dimensions are in
millimeters over [inches]
www.amp.com
Product Performance
Temperature Rating
100° C maximum operating temperature
(including temperature rise due to
applied current).
Current Guidelines
See page 10 of the product specification
for information.
Product Documentation
Product Specification
108-3069
Application Specification
114-3036
Sample Kit
1242020
Specifications
subject to change.
Revised 01-00
Catalog
65481