171662-1 TE Connectivity, 171662-1 Datasheet - Page 17

• Manufacturer Part Number: 171662-1
• Description: E-J MK-2 070 REC CONT
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: 070r

Specifications of 171662-1

• Gender: RCP
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Pitch (mm): Not Requiredmm
• Contact Material: Brass
• Operating Temp Range: -30C to 105C
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Pre-Tin
• Product Height (mm): 3.6mm
• Product Depth (mm): 5.4mm
• Product Length (mm): 16.5mm
• Product Line: Econoseal J
• Product Type: Contact
• Wire/cable Type: Discrete Wire
• Cable Type: Thin Wall
• Termination Method To Wire/cable: Crimp
• Wire/cable Size (awg): 16 – 20
• Wire/cable Size (mm²): 0.5 – 1.25
• Wire Type: Stranded
• Contact Type: Socket
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Pre-Tin
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.76 [29.92]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 2.00 – 2.60 [0.079 – 0.102]
• Application Use: Wire-to-Wire
• Contact Transmits (typical Application): Power
• Packaging Method: Reel
• Packaging Quantity: 6000
• Lead Free Status / RoHS Status: Compliant

A
AMP Sealed Connectors
Contacts
Wire Seals
Connector Housings
1.5 mm [.060 in.] wide tab
contacts.
Receptacle contacts are
made from pre-tin plated
phosphor bronze.
Tab contacts are made from
pre-tin plated brass.
Lanceless contact design to
reduce contact tangling.
Wire range 0.3 - 2.0mm
[#22 - #14 AWG]
Silicon rubber material.
For insulation diameters of
1.4 - 3.3 mm [.055 - .130 in.].
Loose piece wire seals are
crimped simultaneously
with the contacts.
Housings and secondary
locks produced from glass
filled, 66 nylon.
Single row connector
configuration.
Integral (factory installed)
secondary locks.
Resistant to ozone, salts,
gasoline, diesel fuel, brake
fluid, anti-freeze/coolant,
transmission gear lubricant,
and motor oil.
Available in 1, 2, 3, 4, 5,
and 6 position versions.
AMP Technical Support Center/AMP FAX Service
1-800-522-6752 717-986-7777
2
AMP Sealed Connectors
Superseal 1.5 Series . . . Wire To Wire Connectors . . . 6 mm Centers
Designed for the
automotive industry,
Superseal connectors meet
the sealing requirements
outlined in IEC 529 and DIN
40050 I.P 6.7
specifications.
The cap and plug
connector housings
incorporate pre-assembled
secondary locks to help
insure correct and complete
contact insertion into the
housing and helps prevent
the contacts from backing
out during mating. The
secondary lock cannot be
closed if the contacts are
not correctly inserted into
the connector housing.
Cavity plugs are available
for sealing unused
connector cavities.
The double spring contact
design (main spring and
auxiliary anti-over-stress
spring) insure low insertion
and high contact forces.
Additional protective caps
are available for the 2, 3,
and 5 position connectors.
Insertion and Extraction Tools
Contact Extraction Tool
P/N 784980-1
Extraction Tool For Secondary
Lock Of Cap Housing
P/N 785084-1
Secondary Lock Insertion Tools
For Cap Housings
Dimensions are in
millimeters over [inches]
For 1 and 2 position housings P/N
785061-1
For 3 - 6 position housings P/N
785061-2
www.amp.com
Product Performance
Temperature Rating
-40°C to +125°C
(including temperature rise due to
current load).
Current Termination Resistance
3 m (10mA test current).
Dielectric Strength
1.5 kVAC between adjacent contacts.
Product Documentation
Product Specification
108-20090
Application Specification
114-20045
Customer Manual
412-20000
Sample Kit
889457
Specifications
subject to change.
Revised 01-00
Catalog
65481
17