171662-1 TE Connectivity, 171662-1 Datasheet - Page 51

• Manufacturer Part Number: 171662-1
• Description: E-J MK-2 070 REC CONT
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: 070r

Specifications of 171662-1

• Gender: RCP
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Pitch (mm): Not Requiredmm
• Contact Material: Brass
• Operating Temp Range: -30C to 105C
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Pre-Tin
• Product Height (mm): 3.6mm
• Product Depth (mm): 5.4mm
• Product Length (mm): 16.5mm
• Product Line: Econoseal J
• Product Type: Contact
• Wire/cable Type: Discrete Wire
• Cable Type: Thin Wall
• Termination Method To Wire/cable: Crimp
• Wire/cable Size (awg): 16 – 20
• Wire/cable Size (mm²): 0.5 – 1.25
• Wire Type: Stranded
• Contact Type: Socket
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Pre-Tin
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.76 [29.92]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 2.00 – 2.60 [0.079 – 0.102]
• Application Use: Wire-to-Wire
• Contact Transmits (typical Application): Power
• Packaging Method: Reel
• Packaging Quantity: 6000
• Lead Free Status / RoHS Status: Compliant

A
Product Facts
AMP Sealed Connectors
Pins and sockets can be
intermixed in the same
housing
Positive polarization
Rear cavity identification
Contacts completely
enclosed in housings
Positive locking housings
Insulation capability of .060
- .130 mm [1.52 - 3.30 in.]
Removable, crimp snap-in
contacts
Low contact mating force
Contacts accept .05 - 5.0 mm
[#24 - #22] AWG wire sizes
Contacts available with pre-
tin or gold plating
Dual locking lances provide
optimum contact stability
Panel mount or free hanging
Mate with Universal
MATE-N-LOK II Housings
Available in UL 94V-O flame
retardant material. Meets
the material requirements of
table 25.1 of U.L. Standard
1410 (television receivers
and video products)
Not for interrupting current
Harness to PC Board
capability using pin or
socket headers
Pin and socket headers are
available in both vertical
and right angle style
Solderability—headers meet
MIL-STD 202 Method 208
Contacts are on 6.35 mm
[.250 in.] centerline spacing
Recognized under the
Component
Program of
Underwriters Laboratories,
Inc. File No. E28476
Certified by Canadian
Standards Association
File No. LR 7189
Passed test by VDE under
their Registration Number
5618/Continuous
Surveillannce
AMP Technical Support Center/AMP FAX Service
1-800-522-6752 717-986-7777
2
Performance Characteristics
The Universal MATE-N-LOK Connector
performance characteristics are based
on the hanging and panel mount
connectors, loaded with contacts
crimped on stranded wire.
Dielectric Withstanding Voltage
5.0 KVAC or 10.0 KVDC between
adjacent circuits
Insulation Resistance
1000 megohms minimum initial
between adjacent circuits
VoltageRating
600V AC or DC
Connector Mating
Solid Pin—3.0 lb. max. per circuit
Split Pin—1.5 lb. max per circuit
Connector Unmating
Solid Pin—.7 lb. min. per circuit
Split Pin—.5 lb. min per circuit
Contact Insertion Force
5.0 lb. max. per contact
Contact Retention
15 lb. min. per contact
Durability
50 cycles, mating and unmating
AMP Sealed Connectors
Splash Proof/Sealed Universal MATE-N-LOK Connectors
Technical Documents
Product Specifications
108-1031 Universal MATE-N-LOK
108-1053 Universal MATE-N-LOK PC
108-1031-1 Splash Proof Seal,
Application Specification
114-1010 Universal MATE-N-LOK
Instruction Sheet
408-7714 Plug, Cap, Headers, Pin,
408-3392 Universal MATE-N-LOK
Dimensions are in
millimeters over [inches]
Connectors
Board Headers
Contacts
Socket and Accessories
Splash Proof Seals
Universal MATE-N-LOK
Connectors
www.amp.com
Specifications
subject to change.
Revised 01-00
Catalog
65481
51