14P MTA100 CONN ASSY POL RIB

 

4-643816-4

Manufacturer Part Number4-643816-4
Description14P MTA100 CONN ASSY POL RIB
ManufacturerTE Connectivity
4-643816-4 datasheets

Availability: By request

International delivery:

Warranty: 60 days

Shipping & payment terms

Added to cart

Select quantity

 

Specifications of 4-643816-4

Connector TypeConnector AssemblyConnector DesignClosed End
Product LineMTA-100Termination Method To Wire/cableIDC Standard
Wire Size (mm² [awg])0.08-0.09² [28]Mating Connector LockWith
Four Points Of ContactWithoutShroudedNo
Mounting EarsWithoutPanel Mount RetentionWithout
Voltage Rating (vac)250Solder Tail Contact PlatingTin
Number Of Positions14Centerline (mm [in])2.54 [0.100]
NarrowNoPost Number(s) OmittedNone
Cable Exit Angle90°Contact TypeSocket
Contact Plating, Mating Area, MaterialTinContact Base MaterialCopper Alloy
Connector StyleReceptacleHousing ColorGreen
Mating AlignmentWithUl Flammability RatingUL 94V-2
Housing MaterialNylonMating Alignment TypePolarizing Tab
Rohs/elv ComplianceRoHS compliant, ELV compliantLead Free Solder ProcessesNot relevant for lead free process
Rohs/elv Compliance HistoryAlways was RoHS compliantApplies ToWire/Cable
Application UseWire-to-BoardPackaging MethodLoose Piece
show all specifications
2-647421-4 PDF datasheet1-643816-1 PDF datasheet #2
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
8
Page 8
9
Page 9
Page 1/9

Download datasheet (516Kb)Embed
Next
Product
Specification
Connector, MTA-100
1.
SCOPE
1.1.
Content
This specification covers performance, tests and quality requirements for the TE Connectivity (TE)
MTA-100 connector system. This system is mass terminated using insulation displacement technology
on .100 inch centerlines and mates with .025 inch square posts providing a reliable interconnection
between wires and posts mounted on printed circuit boards. The standard system is available in 2
through 28 positions. The MTA-100 connector system is designed to be terminated to 28 AWG to 22
AWG wire, tin plated UL style 1007, 1061 or wire which specifies PVC insulation with temperature rating
compatible with specified operating temperatures, see Figure 4. Wire shall meet application
requirements specified in Application Specification 114-1019. Insulation diameters are: .050 inch
maximum outside diameter for mass termination and .060 inch maximum outside diameter for single
termination.
1.2.
Qualification
When tests are performed on the subject product line, procedures specified in Figure 1 shall be used.
All inspections shall be performed using the applicable inspection plan and product drawing.
2.
APPLICABLE DOCUMENTS
The following TE documents form a part of this specification to the extent specified herein. Unless
otherwise specified, the latest edition of the document applies. In the event of conflict between the
requirements of this specification and the product drawing, the product drawing shall take precedence.
In the event of conflict between the requirements of this specification and the referenced documents,
this specification shall take precedence.
!
109-1: General Requirements for Test Specifications
!
109 Series: Test Specifications as indicated in Figure 1
!
114-1019: Application Specification
!
501-366: Qualification Test Report
3.
REQUIREMENTS
3.1.
Design and Construction
Product shall be of design, construction and physical dimensions specified on the applicable product
drawing.
3.2.
Materials
!
Contact: Phosphor bronze, tin or tin-lead plating and gold over nickel plating
!
Header: Thermoplastic polyester, UL 94V-0
!
Housing: Nylon 6/6 or Nylon 6/12, UL 94V-2 and 94V-0
!
Posts, header: Phosphor bronze, tin plating and gold over nickel plating
©2011 Tyco Electronics Corporation,
| Indicates change
a TE Connectivity Ltd. Company
*Trademark
All Rights Reserved
TE logo is a trademark.
For latest revision, visit our website at www.te.com/documents.
For Regional Customer Service, visit our website at www.te.com
Other products, logos, and company names might be trademarks of their respective owners.
108-1050
11Mar11 Rev H
1 of 9
LOC B

Related parts for 4-643816-4

Part Number DescriptionManufacturer Datasheet
4-643814-0  4-643814-0 Conn IDC Connector F 10 POS 2.54mm IDT RA Cable Mount Loose Piece TE Connectivity
4-643814-4  4-643814-4 Conn IDC Connector F 14 POS 2.54mm IDT RA Cable Mount Loose Piece TE Connectivity
4-643813-4  4-643813-4 Conn IDC Connector F 14 POS 2.54mm IDT RA Cable Mount Loose Piece TE Connectivity
4-643815-4  4-643815-4 14P MTA100 CONN ASSY POL RIB TE Connectivity
4-643817-4  4-643817-4 14P MTA156 CONN ASSY 18AWG LF TE Connectivity
  4-1393238-6 RELAY PWR SPDT 10A 24VDC PCB TE Connectivity
  4-1393800-6 RELAY DPDT 15A 24VDC TE Connectivity
  4-1393224-6 Electromechanical Relay SPDT 8A 12VDC 627Ohm Through Hole TE Connectivity
4-1393637-6  4-1393637-6 V42254P2263C960=PC612 FEDERLEI TE Connectivity
  4-1393486-6 TE Connectivity
4-1393483-0  4-1393483-0 TE Connectivity
4-338314-2  4-338314-2 TE Connectivity
4-1601009-4  4-1601009-4 PC TAB STANDARD SIAMEZE TE Connectivity
4-520448-2  4-520448-2 TERMINAL FEMALE DISCONNECT 6.35MM YELLOW TE Connectivity
4-520447-2  4-520447-2 TERMINAL FEMALE DISCONNECT 6.35MM YELLOW TE Connectivity

4-643816-4 Summary of contents

  • Page 1

    ... The MTA-100 connector system is designed to be terminated to 28 AWG to 22 AWG wire, tin plated UL style 1007, 1061 or wire which specifies PVC insulation with temperature rating compatible with specified operating temperatures, see Figure 4. Wire shall meet application requirements specified in Application Specification 114-1019. Insulation diameters are: .050 inch maximum outside diameter for mass termination and ...

  • Page 2

    ... Ratings ! Voltage: 250 volts AC ! Current: See Figure 4 for applicable current carrying capability ! Temperature: -55 to 105° C 3.4. Performance and Test Description Product is designed to meet the electrical, mechanical and environmental performance requirements specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental conditions per Test Specification 109-1 ...

  • Page 3

    ... TE Spec 109-27. Manually mate and unmate samples with friction lock header for 25 cycles. TE Spec 109-42, Condition A. Measure force necessary to mate samples with friction lock header from point of initial contact to depth of .200 inch at maximum rate of .5 inch per minute. ...

  • Page 4

    ... Physical shock Durability Mating force Unmating force Thermal shock Humidity-temperature cycling Temperature life Mixed flowing gas (a) See paragraph 4.1.A. NOTE (b) Numbers indicate sequence in which tests are performed. (c) Tin-lead plated samples. (d) Gold plated samples. (e) Discontinuities shall not be measured. Energize at 18 Test Specification 109-151. ...

  • Page 5

    ... Test group 5 shall consist position standard tin-lead plated samples terminated to 28 AWG wire position standard tin-lead plated samples terminated to 24 AWG wire; and 6, 10 position standard tin-lead plated samples terminated to 22 AWG wire. All samples shall be unmated and unmounted ...

  • Page 6

    Termination resistance equals millivolts divided by test current less resistance of 2 NOTE inches of wire. (b) After wave soldering, the boards and posts shall be cleaned to remove all flux and contaminates. Temperature & Termination Resistance Measurement Points ...

  • Page 7

    ... To determine acceptable current carrying capacity for percentage connector loading and wire NOTE gage indicated, use the Multiplication Factor (F) from the above chart and multiply it times the Base Rated Current for a single circuit at maximum ambient operating temperature as shown in Figure 4A. Rev H Figure 4A Current Carrying Capability ...

  • Page 8

    PC Board Used For Termination Resistance Dry Circuit Rev H PC Board Used For Current Rating Figure 5 Printed Circuit Test Boards 108-1050 ...

  • Page 9

    Rev H Figure 6 Termination Tensile Strength 108-1050 ...

Related keywords:

  • 4-643816-4 datasheet
  • 4-643816-4 data sheet
  • 4-643816-4 pdf datasheet
  • 4-643816-4 component
  • 4-643816-4 part
  • 4-643816-4 distributor
  • 4-643816-4 RoHS
  • 4-643816-4 datasheet download