5-6605853-8 TE Connectivity, 5-6605853-8 Datasheet

5-6605853-8
Manufacturer Part Number	5-6605853-8
Description	1X1 MAG45, 10/100 714P10,G/Y REAR LED
Manufacturer	TE Connectivity
5-6605853-8 datasheets	1. 1368398-1.pdf (6 pages) 2. 1-6605853-9.pdf (1 page)

Request lead time and price

Availability: By request

International delivery:

Warranty: 60 days

Shipping & payment terms

Specifications of 5-6605853-8
Product Type	Connector	Number Of Cores	5
Magnetics	Integrated Magnetics	Jack Type	RJ45
Signal Routing Type	NIC	Profile	Standard
Pcb Mounting Orientation	Side Entry (Right Angle)	Jack Configuration	1 x 1
Turns Ratio	1:1	Shielded	Yes
Emi Finger - Bottom	With	Termination Method	Solder
Port Configuration	Single	Emi Fingers -top And Sides	With
Latch Orientation	Inverted - Latch Up	Pcb Tail Length (mm [in])	2.92 [0.115]
Contact Termination Type	Through Hole	Preloaded	Yes
Connector Style	Jack	Status Indicator	LED
Decoupling Capacitor	2KV	Rear Pcb Ground Tab	Without
Signal Lead Quantity	8	Rohs/elv Compliance	RoHS compliant, ELV compliant
Lead Free Solder Processes	Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C	Rohs/elv Compliance History	Always was RoHS compliant
Left Led Color (position #1)	Green	Right Led Color (position #2)	Yellow
Operating Temperature (°c [°f])	0 – 70 [32 – 158]	Applies To	Printed Circuit Board
Environmental Conditions	Office / Premises	Application	10/100BASE-T Ethernet

show all specifications

1368398-1 PDF datasheet 1-6605853-9 PDF datasheet #2

Page 1/6

Download datasheet (85Kb)Embed

Prev Next

Product

Specification

Mag45* Modular Jacks With Integrated Magnetics

SCOPE

1.1.

Content

This specification covers performance, tests and quality requirements for the TE Connectivity (TE)

Mag45* Modular Jacks with Integrated Magnetics.

1.2.

Qualification

When tests are performed on the subject product line, procedures specified in Figure 1 shall be used.

All inspections shall be performed using the applicable inspection plan and product drawing.

1.3.

Qualification Test Results

Successful qualification testing on the subject product line was completed on 20Jun00. The

Qualification Test Report number for this testing is 501-524. This documentation is on file at and

available from Engineering Practices and Standards (EPS).

APPLICABLE DOCUMENTS

The following documents form a part of this specification to the extent specified herein. Unless

otherwise specified, the latest edition of the document applies. In the event of conflict between the

requirements of this specification and the product drawing, the product drawing shall take precedence.

In the event of conflict between the requirements of this specification and the referenced documents,

this specification shall take precedence.

2.1.

TE Documents

109-197:

TE Test Specifications vs EIA and IEC Test Methods

●

501-524:

Qualification Test Report

●

502-1129:

Engineering Report

●

2.2.

Industry Standards

ANSI X3.263:

Information Technology - Fibre Distributed Data Interface (FDDI) - Token Ring

●

Twisted Pair Physical Layer Medium Dependent (TP-PMD)

EIA-364:

Electrical Connector/Socket Test Procedures Including Environmental

●

Classifications

FCC Part 68:

Connection of Terminal Equipment to the Telephone, Connector Specifications

●

IEEE 802-3:

Local Area Networks: Carrier Sense Multiple Access With Collision Detection

●

(CSMA/CD) Access Method and Physical Layer Specification

MIL-STD-202: Test Method Standard - Electronic and Electrical Component Parts

●

MIL-STD-810: Test Method Standard - Environmental Engineering Considerations and

●

Laboratory Tests

REQUIREMENTS

3.1.

Design and Construction

Product shall be of the design, construction and physical dimensions specified on the applicable

product drawing.

3.2.

Materials

Materials used in the construction of this product shall be as specified on the applicable product

drawing.

3.3.

Ratings

Voltage: 150 volts AC

●

Current: Signal application only

●

| Indicates Change

a TE Connectivity Ltd. Company

*Trademark

TE logo is a trademark.

For latest revision, visit out website at www.te.com/documents

For Regional Customer service, visit our website at www.te.com

Other products, logos, and company names might be trademarks of their respective owners.

108-2100

30 Jan 12 Rev D

1 of 6

LOC B

Download datasheet (85Kb)

Related parts for 5-6605853-8
Part Number	Description	Manufacturer	Datasheet
5-6605850-8		TE Connectivity	5-6605850-8.pdf (1 page)
5-6605809-5	1X1 MAG45(TM) 7G1,7G01,G/Y & G	TE Connectivity	5-6605809-5.pdf (2 pages)
5-6605817-2	1X1 MAG45(TM)7UN2, 7U14C, G/Y	TE Connectivity	5-6605817-2.pdf (2 pages)
5-6605809-7	1X1 MAG45(TM) 7G1,7G01,G/G LED	TE Connectivity	1368398-1.pdf (6 pages)
5-6605844-1	1X1 MAG45(TM) 7H2ET,755,G/Y RL	TE Connectivity	5-6605844-1.pdf (2 pages)
5-160433-6	187 FASTON REC.IS	TE Connectivity	5-160433-6.pdf (1 page)
5-103735-6	Conn Shrouded Header HDR 7 POS 2.54mm Solder ST Thru-Hole Tube	TE Connectivity	103682-1.pdf (32 pages)
5-104069-6	Conn Shrouded Header HDR 40 POS 1.27mm Solder RA Thru-Hole Tube	TE Connectivity	5-104069-6.pdf (60 pages)
5-5175473-6	.050CL,CHAMP,VERT PLUG,50 POSN	TE Connectivity	5-5175473-6.pdf (1 page)
5-102618-6	Conn Shrouded Header HDR 16 POS 2.54mm Solder ST Thru-Hole	TE Connectivity	5-87589-1.pdf (96 pages)
5-5179009-6	0.8FH,R09H.5,140,08/SN,TU	TE Connectivity	1-1735481-0.pdf (7 pages)
5-1478996-6	STRAIN RELIEF, BLACK, RG59	TE Connectivity	5-1478996-6.pdf (1 page)
5-5179010-6	SOCKET, VERTICAL, 0.8MM, 13MM, 140WAY	TE Connectivity	5-5179009-1.pdf (7 pages)
5-1394462-6	PLUG & SOCKET CONNECTOR, FEMALE, 1POS	TE Connectivity	1-1579004-2.pdf (36 pages)
5-1676480-6		TE Connectivity	1623040-1.pdf (3 pages)

5-6605853-8 Summary of contents
Page 1 ... All inspections shall be performed using the applicable inspection plan and product drawing. 1.3. Qualification Test Results Successful qualification testing on the subject product line was completed on 20Jun00. The Qualification Test Report number for this testing is 501-524. This documentation is on file at and available from Engineering Practices and Standards (EPS). 2. APPLICABLE DOCUMENTS The following documents form a part of this specification to the extent specified herein ... Page 2 ... Extended temperature varieties: -40 to 85° C 3.4. Product Codes Product Codes for this product family are H363, H364, H365 and H366 3.5. Performance and Test Description Product is designed to meet the electrical, mechanical and environmental performance requirements specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental conditions per EIA-364 ... Page 3 ... C with 60 minute dwell at temperature extremes. EIA-364-31B, Method IV. Subject mated and mounted specimens to 10 cycles (10 days) between 25 and 65° 95% RH. EIA-364-65, Class IIA (4 gas). Subject mated and unmated specimens to environmental Class IIA for 10 days. Subject mated and mounted ... Page 4 ... Numbers indicate sequence in which tests are performed. (c) Measure inductance initially and at 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 1000, 1200, 1400, 1600, 1800 and 2000 cycles. (d) 10 days mated; 5 days unmated; 5 days mated. ... Page 5 ... Specimen Selection Specimens shall be prepared in accordance with applicable Instruction Sheets and shall be selected at random from current production. Test group 1 shall consist of 16 specimens. Test groups 2 and 3 shall each consist of 1 specimen. Test group 4 shall consist of 45 specimens. B. Test Sequence Qualification inspection shall be verified by testing specimens as specified in Figure 2. ... Page 6 Rev D 108-2100 ...

5-6605853-8 Summary of contents

Page 1
... All inspections shall be performed using the applicable inspection plan and product drawing. 1.3. Qualification Test Results Successful qualification testing on the subject product line was completed on 20Jun00. The Qualification Test Report number for this testing is 501-524. This documentation is on file at and available from Engineering Practices and Standards (EPS). 2. APPLICABLE DOCUMENTS The following documents form a part of this specification to the extent specified herein ...
Page 2
... Extended temperature varieties: -40 to 85° C 3.4. Product Codes Product Codes for this product family are H363, H364, H365 and H366 3.5. Performance and Test Description Product is designed to meet the electrical, mechanical and environmental performance requirements specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental conditions per EIA-364 ...
Page 3
... C with 60 minute dwell at temperature extremes. EIA-364-31B, Method IV. Subject mated and mounted specimens to 10 cycles (10 days) between 25 and 65° 95% RH. EIA-364-65, Class IIA (4 gas). Subject mated and unmated specimens to environmental Class IIA for 10 days. Subject mated and mounted ...
Page 4
... Numbers indicate sequence in which tests are performed. (c) Measure inductance initially and at 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 1000, 1200, 1400, 1600, 1800 and 2000 cycles. (d) 10 days mated; 5 days unmated; 5 days mated. ...
Page 5
... Specimen Selection Specimens shall be prepared in accordance with applicable Instruction Sheets and shall be selected at random from current production. Test group 1 shall consist of 16 specimens. Test groups 2 and 3 shall each consist of 1 specimen. Test group 4 shall consist of 45 specimens. B. Test Sequence Qualification inspection shall be verified by testing specimens as specified in Figure 2. ...
Page 6
Rev D 108-2100 ...

5-6605853-8

5-6605853-8

Shipping terms

Payment terms

Specifications of 5-6605853-8

Related parts for 5-6605853-8

5-6605853-8 Summary of contents

Related keywords: