6-1761612-0 TE Connectivity, 6-1761612-0 Datasheet

STEP-Z 10MM PLUG 104P LF

6-1761612-0

Manufacturer Part Number
6-1761612-0
Description
STEP-Z 10MM PLUG 104P LF
Manufacturer
TE Connectivity
Datasheets

Specifications of 6-1761612-0

Solder Ball
Tin-Silver
Product Height
10mm
Number Of Positions
104
Vacuum Cover
With
Contact Type
Tab
Contact Base Material
Copper Alloy
Contact Finish
Gold (30) over Nickel (50)
Connector Style
Plug
Housing Material
Thermoplastic - GF
Stack Height (mm [in])
15.00 [0.591], 21.00 [0.827], 25.00 [0.984]
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Reflow solder capable to 245°C, Reflow solder capable to 260°C
Rohs/elv Compliance History
Always was RoHS compliant
Packaging Method
Tray

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
6-1761612-0
Manufacturer:
TE Connectivity AMP Connectors
Quantity:
135
|
|
1.
1.1.
1.2.
1.3.
2.
2.1.
2.2.
3.
3.1.
3.2.
©2008 Tyco Electronics Corporation
Harrisburg, PA
All International Rights Reserved.
SCOPE
Content
This specification covers performance, tests and quality requirements for the STEP-Z* High Speed
Mezzanine 1.00 x 0.65 mm Ball Grid Array (BGA) Differential Connector System which provides for
interconnection of parallel printed wiring boards in low power applications.
Qualification
When tests are performed on the subject product line, procedures specified in Figure 1 shall be used.
All inspections shall be performed using the applicable inspection plan and product drawing.
Qualification Test Results
Successful qualification testing on the subject product line was completed on 20Feb06. Additional
testing was completed on 12Jan07. The Qualification Test Report number for this testing is 501-627.
This documentation is on file at and available from Engineering Practices and Standards (EPS).
APPLICABLE DOCUMENTS
The following documents form a part of this specification to the extent specified herein. Unless otherwise
specified, the latest edition of the document applies. In the event of conflict between the requirements of
this specification and the product drawing, the product drawing shall take precedence. In the event of
conflict between the requirements of this specification and the referenced documents, this specification
shall take precedence.
Tyco Electronics Documents
!
!
!
Industry Standard
EIA-364: Electrical Connector/Socket Test Procedures Including Environmental Classifications
REQUIREMENTS
Design and Construction
Product shall be of the design, construction and physical dimensions specified on the applicable product
drawing.
Materials
Materials used in the construction of this product shall be as specified on the applicable product drawing.
109-197: Test Specification (AMP Test Specifications vs EIA and IEC Test Methods)
114-13101: Application Specification (STEP-Z* Printed Circuit (PC) Board Connectors)
501-627: Qualification Test Report(STEP-Z* High Speed Mezzanine 1.00 X 0.65 mm BGA
Differential Connector System
* Trademark
| Indicates change
Product
Specification
STEP-Z* High Speed Mezzanine 1.00 X 0.65 BGA
Differential Connector System
For latest revision, visit our website at www.tycoelectronics.com\documents.
For Regional Customer Service, visit our website at www.tycoelectronics.com
108-2143
18Jul08 Rev B
1 of 8
LOC B

Related parts for 6-1761612-0

6-1761612-0 Summary of contents

Page 1

... SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the STEP-Z* High Speed Mezzanine 1.00 x 0.65 mm Ball Grid Array (BGA) Differential Connector System which provides for interconnection of parallel printed wiring boards in low power applications. 1.2. Qualification When tests are performed on the subject product line, procedures specified in Figure 1 shall be used. ...

Page 2

... R 10 milliohms maximum. ) With a minimum of 500 data points, the following R shall apply maximum > ...

Page 3

... Minimum total unmating force: 2.5 kg for 104 position; 4.8 kg for 200 position; 7.1 kg for 296 position. Figure 1 (continued) 108-2143 Procedure EIA-364-20, Condition I. 500 volts DC at sea level. Test between 10 signal-signal pair and 10 signal-to-adjacent ground contacts of mated specimens ...

Page 4

... EIA-364-31, Method III. Subject mated specimens to 50 cycles (500 hours) between 25 and 95% RH. Temperature / ramp shall be 1 hour per transition with 3 hour minimum dwell EIA-364-17, Method A, Test Condition 3, Test Time Condition C. Subject mated specimens for 500 hours. ...

Page 5

... Rev B Requirement See Note. See Note. Figure 1 (end) 108-2143 Procedure EIA-364-65, Class IIA (4 gas). Subject mated and mounted specimens to environmental Class IIA for 20 days. After initial LLCR and 50% durability cycles, specimens shall be broken into 2 groups of 5. The plugs from the first ...

Page 6

... Mate, recheck LLCR and then leave in chamber for 10 days mated. After 5 days mated exposure, recheck LLCR, and then return to chamber for final 5 days mated exposure. Rev B Test Group ( Test Sequence ( 2(d),4,6,8,10,12,14,16(e) 2(d),4,6,8,10,12(e) 3(d)(f),15(e)(g) 5(d)(f),11(e)( 5,7,9, Figure 2 108-2143 3( 2(d),4,6,8,10,12(e) 3,5 2,6 3 3(d)(f),11(e)(g) 2 ...

Page 7

... Test group 4 requires 5 connector pairs terminated to LLCR PCB and a minimum of 3 connector pairs terminated to continuity PCB. Mated connectors shall be held together with standoffs and fasteners. Test group 5 requires 5 connector pairs terminated to .062 inch minimum thick LLCR PCB. Test group 6 requires 30 connectors terminated to continuity PCB. Mated connectors shall be held together with standoffs and fasteners ...

Page 8

Low Level Contact Resistance Measurement Points Rev B Figure 3 108-2143 ...

Related keywords