6-1877847-7 TE Connectivity, 6-1877847-7 Datasheet

ASY,PLG,7 P,0 D KEY,COL 5.3-6.5,GRY,BLU

6-1877847-7

Manufacturer Part Number
6-1877847-7
Description
ASY,PLG,7 P,0 D KEY,COL 5.3-6.5,GRY,BLU
Manufacturer
TE Connectivity
Datasheets

Specifications of 6-1877847-7

Product Type
Connector
Collet Color
Blue
Number Of Positions
7
Cable Diameter Range
5.3-6.5
Strain Relief Type
Collet
Contact Finish
Gold over Nickel
Contact Base Material
Phosphor Bronze
Connector Style
Plug
Housing Color
Gray
Alignment Keyed
Housing Material
Thermoplastic - GF
Ul Flammability Rating
UL 94V-0
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Hand solderable with lead free solder
Rohs/elv Compliance History
Always was RoHS compliant
1.
1.1.
1.2.
1.3.
2.
2.1.
2.2.
3.
3.1.
3.2.
©2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. Company
All Rights Reserved
TE logo is a trademark.
SCOPE
Content
This specification covers perform ance, tests and quality requirem ents for the TE Connectivity (TE)
Medical Circular Plastic Connectors with push/pull locking.
Qualification
W hen tests are perform ed on the subject product line, procedures specified in Figure 1 shall be used.
All inspections shall be perform ed using the applicable inspection plan and product drawing.
Qualification Test Results
Successful qualification testing on the subject product line was com pleted on 16Apr07. The
Qualification Test Report num ber for this testing is 501-655. This docum entation is on file at and
available from Engineering Practices and Standards (EPS).
APPLICABLE DOCUM ENTS
The following docum ents form a part of this specification to the extent specified herein. Unless
otherwise specified, the latest edition of the docum ent applies. In the event of conflict between the
requirem ents of this specification and the product drawing, the product drawing shall take precedence.
In the event of conflict between the requirem ents of this specification and the referenced docum ents,
this specification shall take precedence.
TE Docum ents
!
!
!
Industry Standard
EIA-364: Electrical Connector/Socket Test Procedures Including Environm ental Classifications
REQUIREM ENTS
Design and Construction
Product shall be of the design, construction and physical dim ensions specified on the applicable product
drawing.
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
109-197: Test Specification (TE Test Specifications vs EIA and IEC Test Methods)
114-13184: Application Specification (Push-Pull Latch Miniature Circular Plastic Connectors
(CPC))
501-655: Qualification Test Report (Medical Circular Plastic Connector)
| Indicates change
*Trademark
Product
Specification
Medical Circular Plastic Connector
For latest revision, visit our website at www.te.com/documents.
For Regional Customer Service, visit our website at www.te.com
Other products, logos, and company names might be trademarks of their respective owners.
108-2249
11Mar11 Rev B
1 of 5
LOC B

Related parts for 6-1877847-7

6-1877847-7 Summary of contents

Page 1

... Qualification Test Results Successful qualification testing on the subject product line was com pleted on 16Apr07. The Qualification Test Report num ber for this testing is 501-655. This docum entation is on file at and available from Engineering Practices and Standards (EPS). 2. APPLICABLE DOCUM ENTS The following docum ents form a part of this specification to the extent specified herein ...

Page 2

... See Figure 4. EIA-364-21. 500 volts DC inute hold. Test between adjacent contacts. EIA-364-20, Condition I. 1500 volts AC at sea level for 5, 6 and 7 position specim ens; 1200 volts AC at sea level for 10 position specim ens. Test between adjacent contacts ...

Page 3

... EIA-364-32. Subject m ated specim ens to 5 cycles between -50 and 170°C. EIA-364-31, Method III. Subject m ated specim ens to 10 cycles (10 days) between 25 and 65° 100% RH. EIA-364-17, Method A, Test Condition 4, Test Tim e Condition C. Subject m ated specim ens to 105°C for 500 hours ...

Page 4

... Numbers indicate sequence in which tests are performed. (d) Precondition specimens with 10 durability cycles. Rev B Requirem ent See Note. Figure 2 (end) Test Group ( Test Sequence ( 3,7 2,4 2 3(d) 3( Figure 3 108-2249 Procedure EIA-364-65, Class IIA (4 gas). Subject m ated specim ens to environm ental Class IIA for 20 days 2,6 3 ...

Page 5

QUALITY ASSURANCE PROVISIONS 4.1. Qualification Testing A. Specim en Selection Specim ens shall be prepared in accordance with applicable Instruction Sheets and shall be selected at random from current production. Each test group shall consist inim ...

Related keywords