3-2106431-1

Manufacturer Part Number3-2106431-1
DescriptionWIRE-BOARD CONN, RECEPTACLE, 1WAY, 4MM
ManufacturerTE Connectivity
3-2106431-1 datasheets
 


Specifications of 3-2106431-1

Connector TypeWire To BoardContact TerminationSurface Mount Horizontal
GenderReceptacleNo. Of Contacts1
No. Of Rows1Pitch Spacing4mm
Contact PlatingTinRohs CompliantYes
Connector DesignFeed ThroughStrain ReliefWith
SealedNoTermination Method To Pc BoardSurface Mount
Pcb Mount RetentionWithPcb Mount AlignmentWithout
Smt CompatibleYesMount AngleRight Angle
Wire/cable TypeDiscrete WireTermination Method To Wire/cableIDC
KeyedNoMake First / Break LastNo
Contact Current Rating, Max (a)9Operating Voltage (vac)250
Operating Voltage (vdc)250Tail OrientationStaggered
Wire/cable Size (awg)24Tool-less Wire TerminationYes
Profile Height (y-axis) (mm [in])5.80 [0.228]Number Of Positions1
Number Of Rows1Length (x-axis) (mm [in])5.70 [0.224]
Width (z-axis) (mm [in])7.75 [0.305]Post-mating Assembly Measurement (mm [in])5.7 [0.224]
Header Mating DirectionHorizontalPcb Mount Retention TypeSolder Pads
Strain Relief TypeTerminating CoversTail Plating MaterialMatte Tin-Lead over Nickel
Tail Plating, Thickness (µm [?in])5.08 [200]Contact Plating, Mating Area, MaterialMatte Tin
Contact Plating, Mating Area, Thickness (µm [?in])5.08 [200]Stamped And FormedYes
Housing MaterialLiquid Crystal Polymer (LCP)Housing ColorNatural
Ul Flammability RatingUL 94V-0Pre-designed Cables AvailableNo
Agency/standardCSA, ULAgency/standard NumberC22.2 No. 182.3-M1987, UL 1977
Rohs/elv ComplianceRoHS compliant, ELV compliantLead Free Solder ProcessesWave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
Rohs/elv Compliance HistoryAlways was RoHS compliantCircuit Identification FeatureWithout
Operating Temperature (°c [°f])-40 – +105 [-40 – +221]Applies ToPrinted Circuit Board
Accepts Wire Insulation Diameter, Range (mm [in])1.45 [0.057]Smt Soldering Temperature (°c [°f])220 [428]
Lighting Interconnect LevelLevel 1Glow Wire RatingNo
Uv Exposure RatedNoApplication UseWire-to-Board
Packaging MethodSMT Pocket Tape  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
Page 1/7

Download datasheet (173Kb)Embed
Next
Product
Specification
IDC SSL Connector
1.
SCOPE
1.1.
Content
This specification covers performance, tests and quality requirements for the Tyco Electronics Insulation
Displacement (IDC) Solid State Lighting (SSL) Connector used with 18 to 24 AWG solid and stranded
copper wire in indoor and outdoor lighting.
1.2.
Qualification
When tests are performed on the subject product line, procedures specified in Figure 1 shall be used.
All inspections shall be performed using the applicable inspection plan and product drawing.
1.3.
Successful qualification testing on the subject product line was completed on 21Dec10. The
Qualification Test Report number for this testing is 501-742. This documentation is on file at and
available from Engineering Practices and Standards (EPS).
2.
APPLICABLE DOCUMENTS
The following documents form a part of this specification to the extent specified herein. Unless
otherwise specified, the latest edition of the document applies. In the event of conflict between the
requirements of this specification and the product drawing, the product drawing shall take precedence.
In the event of conflict between the requirements of this specification and the referenced documents,
this specification shall take precedence.
2.1.
Tyco Electronics Documents
114-13266: Application Specification (IDC SSL Connector)
!
501-742: Qualification Test Report (IDC SSL Connector)
!
2.2.
Industry Document
EIA-364: Electrical Connector/Socket Test Procedures Including Environmental Classifications
2.3.
Reference Document
109-197: Test Specification (Tyco Electronics Test Specifications vs EIA and IEC Test Methods)
3.
REQUIREMENTS
3.1.
Design and Construction
Product shall be of the design, construction and physical dimensions specified on the applicable product
drawing.
3.2.
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
©2011 Tyco Electronics Corporation
* Trademark
Berwyn, PA
| Indicates change
All Rights Reserved.
For latest revision, visit our website at www.tycoelectronics.com\documents.
For Regional Customer Service, visit our website at www.tycoelectronics.com
108-2404
09Mar11 Rev A
1 of 7
LOC B

3-2106431-1 Summary of contents

  • Page 1

    ... Application Specification (IDC SSL Connector) ! 501-742: Qualification Test Report (IDC SSL Connector) ! 2.2. Industry Document EIA-364: Electrical Connector/Socket Test Procedures Including Environmental Classifications 2.3. Reference Document 109-197: Test Specification (Tyco Electronics Test Specifications vs EIA and IEC Test Methods) 3. REQUIREMENTS 3.1. ...

  • Page 2

    ... Test between adjacent contacts. EIA-364-21. 500 volts DC, 2 minute hold. Test between adjacent contacts. EIA-364-70, Method 1. Stabilize at a single current level until 3 readings at 5 minute intervals are within 1°C. EIA-364-28, Test Condition VII, Condition Letter D. Subject specimens to 3.10 G's rms between 20 to 500 Hz. Fifteen minutes in each of 3 mutually perpendicular planes ...

  • Page 3

    ... See Figure 7. EIA-364-32, Test Condition VIII. Subject specimens to 25 cycles between -40 and 105°C with 30 minute dwells at temperature extremes and 1 minute transition between temperatures. EIA-364-31, Method III. Subject specimens to 10 cycles (10 days) between 25 and 65° ...

  • Page 4

    ... Wire insertion force Termination tensile strength, parallel Termination tensile strength, perpendicular Thermal shock Humidity/temperature cycling Temperature life Final examination of product (a) See paragraph 4.1.A. NOTE (b) Numbers indicate sequence in which tests are performed. Rev A Test Group ( Test Sequence ( 2,5 2,7 3,8 2,7 3 Figure 2 108-2404 ...

  • Page 5

    ... Quality Conformance Inspection The applicable quality inspection plan shall specify the sampling acceptable quality level to be used. Dimensional and functional requirements shall be in accordance with the applicable product drawing and this specification. Rev A Figure 3 LLCR Measurement Points 108-2404 ...

  • Page 6

    ... Vibration and Mechanical Shock Mounting Fixture NOTE Rev A Figure 4 Wire Size (AWG) Position Size 18 24 Stranded Wire 1 222.4 [50] 133.4 [30] 4 778.4 [175] 556 [125] Solid Wire 1 178 [40] 89 [20] 4 890 [200] 444.8 [100] All values in N [lbf] maximum. Figure 5 Wire Insertion Force ...

  • Page 7

    Termination Tensile Strength, Perpendicular Rev A Figure 6 Termination Tensile Strength, Parallel Figure 7 108-2404 ...