2007492-5 TE Connectivity, 2007492-5 Datasheet - Page 3

• Manufacturer Part Number: 2007492-5
• Description: SFP CONNECTOR RECEPTACLE 40POS PRESS FIT
• Manufacturer: TE Connectivity
• Series: SFP+ Seriesr

Specifications of 2007492-5

• No. Of Contacts: 40
• Connector Type: SFP+
• Rohs Compliant: Yes
• Product: SFP Connectors
• Number Of Ports: 2
• Contact Plating: Gold
• Contact Material: Copper Alloy
• Mounting Style: Through Hole
• Termination Style: Press Fit
• Accessory: Cage Assembly, 2x1 Stacked
• Color: Black
• Flammability Rating: UL 94 V-0
• Housing Material: Liquid Crystal Polymer (LCP)
• Mounting Angle: Right
• Product Type: Cage
• Termination Type: Press-Fit
• Configuration: 2 x 1
• Pcb Mount: Single Sided
• Termination Post Length (mm [in]): 3.00 [0.118]
• Contact Plating, Mating Area, Material: Gold or Gold Flash over Palladium Nickel
• Contact Base Material: Copper Alloy
• Cage Type: Stacked
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Cage Material: Nickel Silver
• Emi Containment: External Springs
• Lightpipe: With
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Application: SFP+
• Lightpipe Configuration: Four Per Column
• Packaging Method: Tray
• Lead Free Status / Rohs Status: Details

Transceiver insertion force.
Transceiver extraction force.
Rotational cable pull.
Press- fit insertion force.
Press-fit extraction force.
Cage latch strength/module
retention.
Reseating.
Mate/unmate.
Thermal shock.
Rev A
Test Description
18 N [4.0 lbf] maximum.
12.5 N [2.8 lbf] maximum.
33.4 N [7.5 lbf] minimum without
displacement of cage assembly or
connector from Printed Circuit
Board (PCB).
4.4 kN [1000 lbf] maximum for 2X4
connector/cage assembly.
800 N [180 lbf] minimum for 2X4
connector/cage assembly.
90 N [20.2 lbf] minimum.
See Note.
See Note.
See Note.
Figure 1 (continued)
ENVIRONMENTAL
Requirement
EIA-364-13.
Measure force necessary to insert
the transceiver into the receptacle
with kick-out springs inoperable at a
maximum rate of 12.7 mm [.5 in] per
minute.
EIA-364-13.
Measure force necessary to extract
the transceiver from the receptacle
with kick-out springs inoperable at a
maximum rate of 12.7 mm [.5 in] per
minute.
Load cabled module into
cage/connector assembly applied to
PCB with attached bezel. Rotate
cable 40 degrees toward PCB, and
then rotate 360 degrees with the
load still applied.
Measure force necessary to press
the specimen onto the PCB into
proper seating location at a
maximum rate of 12.7 mm [.5 in] per
minute.
Measure force necessary to extract
the specimen from the PCB at a
maximum rate of 12.7 mm [.5 in] per
minute.
Load cable module into
cage/connector assembly applied to
PCB with attached bezel. Apply
specified axial load to engaged
module at a maximum rate of 6.35
mm [.25 in] per minute and hold for
1 minute to verify module retention
and cage latch strength.
Unmate and mate specimens 3
times.
Unmate and mate specimens 1
time.
EIA-364-32, Test Condition VII.
Subject mated specimens to 5
cycles between -55 and 105°C with
30 minute dwells at temperature
extremes and 1 minute transition
between temperatures.
Procedure
108-2331
3 of 6