2007492-5 TE Connectivity, 2007492-5 Datasheet - Page 6

• Manufacturer Part Number: 2007492-5
• Description: SFP CONNECTOR RECEPTACLE 40POS PRESS FIT
• Manufacturer: TE Connectivity
• Series: SFP+ Seriesr

Specifications of 2007492-5

• No. Of Contacts: 40
• Connector Type: SFP+
• Rohs Compliant: Yes
• Product: SFP Connectors
• Number Of Ports: 2
• Contact Plating: Gold
• Contact Material: Copper Alloy
• Mounting Style: Through Hole
• Termination Style: Press Fit
• Accessory: Cage Assembly, 2x1 Stacked
• Color: Black
• Flammability Rating: UL 94 V-0
• Housing Material: Liquid Crystal Polymer (LCP)
• Mounting Angle: Right
• Product Type: Cage
• Termination Type: Press-Fit
• Configuration: 2 x 1
• Pcb Mount: Single Sided
• Termination Post Length (mm [in]): 3.00 [0.118]
• Contact Plating, Mating Area, Material: Gold or Gold Flash over Palladium Nickel
• Contact Base Material: Copper Alloy
• Cage Type: Stacked
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Cage Material: Nickel Silver
• Emi Containment: External Springs
• Lightpipe: With
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Application: SFP+
• Lightpipe Configuration: Four Per Column
• Packaging Method: Tray
• Lead Free Status / Rohs Status: Details

4.
4.1.
4.2.
4.3.
4.4.
Rev A
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form, fit or function are made to the product or manufacturing process,
product assurance shall coordinate requalification testing, consisting of all or part of the original testing
sequence as determined by development/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that the product meets the requirements of Figure 1. Failures
attributed to equipment, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specimens resubmitted for qualification. Testing to
confirm corrective action is required before resubmittal.
Quality Conformance Inspection
The applicable quality inspection plan shall specify the sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
Specimen Selection
Specimens shall be prepared in accordance with applicable Instruction Sheets and shall be
selected at random from current production. Test groups 1, 2, 3, 5 and 6 shall each consist of 5
gold plated specimens. Test group 4 shall consist of 5 gold plated specimens and 5 palladium
nickel plated specimens.
Test Sequence
Qualification inspection shall be verified by testing specimens as specified in Figure 2.
108-2331
6 of 6