MT29F8G08ABABAWP-IT:B Micron Technology Inc, MT29F8G08ABABAWP-IT:B Datasheet - Page 42

• Manufacturer Part Number: MT29F8G08ABABAWP-IT:B
• Description: MICMT29F8G08ABABAWP-IT:B 8GB ASYNCHRONOU
• Manufacturer: Micron Technology Inc

Specifications of MT29F8G08ABABAWP-IT:B

• Cell Type: NAND
• Density: 8Gb
• Interface Type: Parallel
• Boot Type: Not Required
• Address Bus: 30b
• Operating Supply Voltage (typ): 3.3V
• Operating Temp Range: -40C to 85C
• Package Type: TSOP
• Program/erase Volt (typ): 2.7 to 3.6V
• Sync/async: Asynchronous
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 8b
• Number Of Words: 1G
• Mounting: Surface Mount
• Pin Count: 48
• Lead Free Status / Rohs Status: Compliant

SYNCHRONOUS RESET (FCh)
Figure 29:
PDF: 09005aef8386131b / Source: 09005aef838cad98
m61a_async_sync_nand.fm - Rev. A 2/09 EN
SYNCHRONOUS RESET (FCh) Cycle
When the synchronous interface is active, the SYNCHRONOUS RESET (FCh) command
is used to put a target into a known condition and to abort a command sequence in
progress. This command is accepted by all LUNs, even when they are BUSY.
When FCh is written to the command register, the target goes busy for
the selected target (CE#) discontinues all array operations on all LUNs. All pending
single-plane and multi-plane operations are cancelled. If this command is issued while a
PROGRAM or ERASE operation is occurring on one or more LUNs, the data may be
partially programmed or erased and is invalid. The command register is cleared and
ready for the next command. The data register and cache register contents are invalid,
and the synchronous interface remains active.
During or after
SYNCHRONOUS RESET is only accepted while the synchronous interface is active. Its
use is prohibited when the asynchronous interface is active.
DQ[7:0]
W/R#
R/B#
DQS
CE#
ALE
CLK
CLE
t CS
Micron Confidential and Proprietary
t
RST, the host can poll each LUN's status register.
8Gb Asychronous/Synchronous NAND Flash Memory
t CAD
RESET command
SYNCHRONOUS
t CALS
t CAS
FCh
t CAH
t CALH
42
t CALS
t WB
Micron Technology, Inc., reserves the right to change products or specifications without notice.
t CALH
t CALH
t CH
t RST
Command Definitions
©2008 Micron Technology, Inc. All rights reserved.
Don’t Care
t
RST. During
Advance
t
RST,