C8051F336-GMR Silicon Laboratories Inc, C8051F336-GMR Datasheet - Page 112

• Manufacturer Part Number: C8051F336-GMR
• Description: Microcontrollers (MCU) 16KB 10ADC 10DAC 768Ram MCU Lead Free
• Manufacturer: Silicon Laboratories Inc

Specifications of C8051F336-GMR

• Processor Series: C8051F3x
• Core: 8051
• Data Bus Width: 8 bit
• Program Memory Type: Flash
• Program Memory Size: 16 KB
• Data Ram Size: 768 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 17
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: QFN-20
• 3rd Party Development Tools: KSK-SL-TOOLSTICK, PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F336DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• On-chip Dac: 10 bit
• Package: 20QFN
• Device Core: 8051
• Family Name: C8051F336
• Maximum Speed: 25 MHz
• Ram Size: 768 Byte
• Operating Temperature: -40 to 85 °C
• Lead Free Status / Rohs Status: Details

C8051F336/7/8/9
SFR Definition 19.3. OSCICN: Internal H-F Oscillator Control
SFR Address = 0xB2
112
Name
Reset
3:2
1:0
Bit
Type
7
6
5
4
Bit
SUSPEND
IFCN[1:0]
STSYNC
IOSCEN
Unused
IFRDY
IOSCEN
Name
R/W
7
1
Internal H-F Oscillator Enable Bit.
0: Internal H-F Oscillator Disabled.
1: Internal H-F Oscillator Enabled.
Internal H-F Oscillator Frequency Ready Flag.
0: Internal H-F Oscillator is not running at programmed frequency.
1: Internal H-F Oscillator is running at programmed frequency.
Internal Oscillator Suspend Enable Bit.
Setting this bit to logic 1 places the internal oscillator in SUSPEND mode. The inter-
nal oscillator resumes operation when one of the SUSPEND mode awakening
events occurs.
Suspend Timer Synchronization Bit.
This bit is used to indicate when it is safe to read and write the registers associated
with the suspend wake-up timer. If a suspend wake-up source other than the timer
has brought the oscillator out of suspend mode, it may take up to three timer clocks
before the timer can be read or written. When STSYNC reads '1', reads and writes of
the timer register should not be performed. When STSYNC reads '0', it is safe to
read and write the timer registers.
Unused. Read = 00b; Write = Don’t Care
Internal H-F Oscillator Frequency Divider Control Bits.
00: SYSCLK derived from Internal H-F Oscillator divided by 8.
01: SYSCLK derived from Internal H-F Oscillator divided by 4.
10: SYSCLK derived from Internal H-F Oscillator divided by 2.
11: SYSCLK derived from Internal H-F Oscillator divided by 1.
IFRDY
R
6
1
SUSPEND
R/W
5
0
STSYNC
Rev.1.0
R
4
0
Function
R
3
0
R
2
0
1
0
IFCN[1:0]
R/W
0
0