EPM7064SLC44-7N Altera, EPM7064SLC44-7N Datasheet - Page 21

IC MAX 7000 CPLD 64 44-PLCC

EPM7064SLC44-7N

Manufacturer Part Number
EPM7064SLC44-7N
Description
IC MAX 7000 CPLD 64 44-PLCC
Manufacturer
Altera
Series
MAX® 7000r
Datasheet

Specifications of EPM7064SLC44-7N

Programmable Type
In System Programmable
Delay Time Tpd(1) Max
7.5ns
Voltage Supply - Internal
4.75 V ~ 5.25 V
Number Of Logic Elements/blocks
4
Number Of Macrocells
64
Number Of Gates
1250
Number Of I /o
36
Operating Temperature
0°C ~ 70°C
Mounting Type
Surface Mount
Package / Case
44-PLCC
Voltage
5V
Memory Type
EEPROM
Number Of Logic Elements/cells
4
Family Name
MAX 7000S
# Macrocells
64
Number Of Usable Gates
1250
Frequency (max)
166.7MHz
Propagation Delay Time
7.5ns
Number Of Logic Blocks/elements
4
# I/os (max)
36
Operating Supply Voltage (typ)
5V
In System Programmable
Yes
Operating Supply Voltage (min)
4.75V
Operating Supply Voltage (max)
5.25V
Operating Temp Range
0C to 70C
Operating Temperature Classification
Commercial
Mounting
Surface Mount
Pin Count
44
Package Type
PLCC
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Features
-
Lead Free Status / Rohs Status
Compliant
Other names
544-2014
EPM7064SLC44-7N

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
EPM7064SLC44-7N
Manufacturer:
ALTERA
Quantity:
5 510
Part Number:
EPM7064SLC44-7N
Manufacturer:
ALTERA
Quantity:
2 524
Part Number:
EPM7064SLC44-7N
Manufacturer:
Altera
Quantity:
10 000
Part Number:
EPM7064SLC44-7N
Manufacturer:
ALTERA
0
Part Number:
EPM7064SLC44-7N
Manufacturer:
ALTERA/阿尔特拉
Quantity:
20 000
Part Number:
EPM7064SLC44-7N
Manufacturer:
ALTERA2O
Quantity:
6 652
Part Number:
EPM7064SLC44-7N/10N
Manufacturer:
ALTERA
0
Part Number:
EPM7064SLC44-7N/EPM7064SLC44-7
Manufacturer:
ALTERA
0
Programming with
External Hardware
Altera Corporation
f
f
By using an external 5.0-V pull-up resistor, output pins on MAX
7000S devices can be set to meet 5.0-V CMOS input voltages. When
V
pull-up transistor, allowing the external pull-up resistor to pull the
output high enough to meet 5.0-V CMOS input voltages. When
V
because the pull-up transistor will already turn off when the pin
exceeds approximately 3.8 V, allowing the external pull-up resistor to
pull the output high enough to meet 5.0-V CMOS input voltages.
Slew-Rate Control
The output buffer for each MAX 7000E and MAX 7000S I/O pin has
an adjustable output slew rate that can be configured for low-noise
or high-speed performance. A faster slew rate provides high-speed
transitions for high-performance systems. However, these fast
transitions may introduce noise transients into the system. A slow
slew rate reduces system noise, but adds a nominal delay of 4 to 5 ns.
In MAX 7000E devices, when the Turbo Bit is turned off, the slew
rate is set for low noise performance. For MAX 7000S devices, each
I/O pin has an individual EEPROM bit that controls the slew rate,
allowing designers to specify the slew rate on a pin-by-pin basis.
MAX 7000 devices can be programmed on Windows-based PCs with
the Altera Logic Programmer card, the Master Programming Unit
(MPU), and the appropriate device adapter. The MPU performs a
continuity check to ensure adequate electrical contact between the
adapter and the device.
For more information, see the
Sheet.
The Altera development system can use text- or waveform-format
test vectors created with the Text Editor or Waveform Editor to test
the programmed device. For added design verification, designers
can perform functional testing to compare the functional behavior of
a MAX 7000 device with the results of simulation. Moreover, Data
I/O, BP Microsystems, and other programming hardware
manufacturers also provide programming support for Altera
devices.
For more information, see the
CCIO
CCIO
is 3.3 V, setting the open drain option will turn off the output
is 5.0 V, setting the output drain option is not necessary
MAX 7000 Programmable Logic Device Family Data Sheet
Altera Programming Hardware Data
Programming Hardware
Manufacturers.
21

Related parts for EPM7064SLC44-7N