EP2S90F1508I4 Altera, EP2S90F1508I4 Datasheet - Page 52

• Manufacturer Part Number: EP2S90F1508I4
• Description: IC STRATIX II FPGA 90K 1508-FBGA
• Manufacturer: Altera
• Series: Stratix® IIr

Specifications of EP2S90F1508I4

• Number Of Logic Elements/cells: 90960
• Number Of Labs/clbs: 4548
• Total Ram Bits: 4520488
• Number Of I /o: 902
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 1508-FBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Gates: -
• Other names: 544-1923; EP2S90F1508I4

Digital Signal Processing Block
2–44
Stratix II Device Handbook, Volume 1
Multiplier
Multiply-accumulator
Two-multipliers adder
Four-multipliers adder
Table 2–6. Multiplier Size & Configurations per DSP Block
DSP Block Mode
Modes of Operation
The adder, subtractor, and accumulate functions of a DSP block have four
modes of operation:
■
■
■
■
Table 2–6
block mode according to size. These modes allow the DSP blocks to
implement numerous applications for DSP including FFTs, complex FIR,
FIR, and 2D FIR filters, equalizers, IIR, correlators, matrix multiplication
and many other functions. The DSP blocks also support mixed modes
and mixed multiplier sizes in the same block. For example, half of one
DSP block can implement one 18 × 18-bit multiplier in multiply-
accumulator mode, while the other half of the DSP block implements four
9 × 9-bit multipliers in simple multiplier mode.
DSP Block Interface
Stratix II device DSP block input registers can generate a shift register that
can cascade down in the same DSP block column. Dedicated connections
between DSP blocks provide fast connections between the shift register
inputs to cascade the shift register chains. You can cascade registers
within multiple DSP blocks for 9 × 9- or 18 × 18-bit FIR filters larger than
four taps, with additional adder stages implemented in ALMs. If the DSP
block is configured as 36 × 36 bits, the adder, subtractor, or accumulator
stages are implemented in ALMs. Each DSP block can route the shift
register chain out of the block to cascade multiple columns of DSP blocks.
Four two-multiplier adder
Two four-multiplier adder
Eight multipliers with
eight product outputs
(two 9 × 9 complex
multiply)
Simple multiplier
Multiply-accumulator
Two-multipliers adder
Four-multipliers adder
shows the different number of multipliers possible in each DSP
9 × 9
-
Four multipliers with four
product outputs
Two 52-bit multiply-
accumulate blocks
Two two-multiplier adder
(one 18 × 18 complex
multiply)
One four-multiplier adder
18 × 18
One multiplier with one
product output
Altera Corporation
36 × 36
-
-
-
May 2007