XC5VLX50T-1FFG1136C Xilinx Inc, XC5VLX50T-1FFG1136C Datasheet - Page 108

• Manufacturer Part Number: XC5VLX50T-1FFG1136C
• Description: IC FPGA VIRTEX-5 50K 1136FBGA
• Manufacturer: Xilinx Inc
• Series: Virtex™-5 LXTr

Specifications of XC5VLX50T-1FFG1136C

• Total Ram Bits: 2211840
• Number Of Logic Elements/cells: 46080
• Number Of Labs/clbs: 3600
• Number Of I /o: 480
• Voltage - Supply: 0.95 V ~ 1.05 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 1136-BBGA, FCBGA
• No. Of Logic Blocks: 7200
• No. Of Gates: 50000
• Family Type: Virtex-5 LXT
• No. Of Speed Grades: 1
• No. Of I/o's: 480
• Clock Management: PLL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: HW-V5-ML561-UNI-G - EVALUATION PLATFORM VIRTEX-5HW-V5-ML550-UNI-G - EVALUATION PLATFORM VIRTEX-5HW-V5-ML521-UNI-G - EVALUATION PLATFORM VIRTEX-5HW-V5GBE-DK-UNI-G - KIT DEV V5 LXT GIGABIT ETHERNET122-1508 - EVALUATION PLATFORM VIRTEX-5
• Number Of Gates: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 122-1564

Chapter 3: Phase-Locked Loops (PLLs)
X-Ref Target - Figure 3-14
108
1
Matches
IBUFG
PLL Driving DCM
2
3
CLKIN1
CLKFBIN
RST
CLKIN
CLKFBIN
RST
A second option for reduce clock jitter is to use the PLL to clean-up the input clock jitter
before driving into the DCM. This will improve the output jitter of all DCM outputs, but
any added jitter by the DCM will still be passed to the clock outputs. Both PLL and DCM
should reside in the same CMT block because dedicated resources exist between the PLL
and DCM to support the zero delay mode. When the PLL and DCM do not reside in the
same CMT, then the only connection is through a BUFG hindering the possibility of
deskew.
One PLL can drive multiple DCMs as long as the reference frequency can be generated by
a single PLL. For example, if a 33 MHz reference clock is driven into the PLL, and the
design uses one DCM to operate at 200 MHz and the other to run at 100 MHz, then the
VCO can be operated at 600 MHz (M1 = 18). The VCO frequency can be divided by three to
generate a 200 MHz clock and another counter can be divided by six to generate the
100 MHz clock. For the example in
DCM
PLL
CLKFBOUT
CLKFX180
CLK2X190
CLKOUT0
CLKOUT1
CLKOUT2
CLKOUT3
CLKOUT4
CLKOUT5
CLK190
CLK270
CLKDV
CLKFX
CLK2X
CLK90
CLK0
Figure 3-14: PLL Driving a DCM
www.xilinx.com
BUFG
Figure
4
5
6
3-14, one PLL can drive both DCMs.
To Logic, etc.
To Logic, etc.
1
2
3
4
5
6
Virtex-5 FPGA User Guide
UG190 (v5.3) May 17, 2010
ug190_3_14_092107