G3B25AB-XC-RO NKK Switches, G3B25AB-XC-RO Datasheet

no-image

G3B25AB-XC-RO

Manufacturer Part Number
G3B25AB-XC-RO
Description
Pushbutton Switches DPDT ON(ON) STRT BRKT SMT RED CAP
Manufacturer
NKK Switches
Series
G3Br
Type
Ulta-Miniature SMT Pushbutton Switchr
Datasheet

Specifications of G3B25AB-XC-RO

Contact Form
DPDT
Switch Function
ON - (ON)
Contact Rating
0.4 Volt-Amp at 28 Volts
Termination Style
Solder
Actuator
Plunger, Round
Mounting Style
SMD/SMT
Terminal Seal
Nitrile Butadiene Rubber
Contact Plating
Gold
Contact Material
Phosphor Bronze
Illumination
Not Illuminated
Flammability Rating
UL 94 V-0
Body Length
9 mm
Body Shape
Rectangular
Dielectric Strength
500 Volts
Housing Material
Polyphenylene Sulfide
Insulation Resistance
500 MOhms
Mounting Angle
Straight
Operating Force
2 N
Power Capacity (va)
0.4 Volt-Amp
Voltage Rating Ac
28 Volts
Voltage Rating Dc
28 Volts
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
633-G3B25AB-XC G3B25AB-XC
C
General
Series G3B
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
Installation
Processing
Standards & Certifications
C52
Operating Temperature Range:
Nominal Operating Force:
Flammability Standard:
Insulation Resistance:
Stationary Contacts:
Contact Resistance:
Dielectric Strength:
Movable Contacts:
Mechanical Life:
Sealing Rings:
Electrical Life:
Coplanarity:
Logic Level:
Mounting:
Soldering:
Terminals:
Vibration:
Humidity:
Cleaning:
Actuator:
Travel:
Shock:
Case:
Base:
Specifications
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
80 milliohms maximum
500 megohms minimum @ 500V DC
500V AC minimum for 1 minute minimum
50,000 operations minimum
50,000 operations minimum
2.0N
Pretravel: .024” (0.6mm); Overtravel: .019” (0.5mm); Total Travel: .043” (1.1mm)
Polyphenylene sulfide (UL94V-0)
Polyphenylene sulfide (UL94V-0)
Nitrile butadiene rubber
Phosphor bronze with gold plating
Phosphor bronze with gold plating
Polyphenylene sulfide (UL94V-0)
Phosphor bronze with gold plating
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 500Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning
in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
It is recommended that the body of models for upright mounting without bracket be fastened to a
panel or similar support for protection of solder joints from mechanical stress.
See specifications in Terms & Acronyms in Supplement section.
Reflow Soldering Recommended. See Profile B in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Automated cleaning. See Cleaning specifications in Supplement section.
UL94V-0 actuator, case & base
The G3B Series pushbuttons have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
www.nkk.com
Ultra-Miniature Process Sealed SMT Pushbuttons

Related parts for G3B25AB-XC-RO

G3B25AB-XC-RO Summary of contents

Page 1

... Automated cleaning. See Cleaning specifications in Supplement section. UL94V-0 actuator, case & base The G3B Series pushbuttons have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. ...

Page 2

... Ultra-Miniature Process Sealed SMT Pushbuttons Distinctive Characteristics Ultra-miniature size allows high density mounting, and extremely light weight of 0.6 gram makes these switches ideal for handheld equipment. Tape-reel and stick-tube packaging allow rapid automated placement of surface mount devices. Tape-reel packaging meets EIA-481-2 Standard. ...

Page 3

... Momentary Packaged in Partitioned Tray Plunger Position ( ) = Momentary Normal Pole Model SP G3B15 ON DP G3B25 ON C54 Ultra-Miniature Process Sealed SMT Pushbuttons TYPICAL SWITCH ORDERING EXAMPLE Terminals Gull Wing for P Upright Mount Gull Wing for B Upright with Bracket Gull Wing for H Right Angle Packaging Partitioned Tray for Upright & ...

Page 4

... Ultra-Miniature Process Sealed SMT Pushbuttons .130” (3.3mm Long Plunger Available with bulk pack- aging only. Cap must be (2.0) Dia .079 installed after processing. Material: Polyamide (3.3) Finish: Glossy .130 Cap Colors Available: (0.6) Typ .024 (4.0) Dia .157 (2.0) Dia ...

Page 5

... Switches must be ordered in 500-piece increments when tape-reel packaging is selected. This packaging meets EIA-481-2 Standard for “16mm and 24mm Embossed Carrier Taping of Surface Mount Components for Automatic Handling.” C56 Ultra-Miniature Process Sealed SMT Pushbuttons Upright Mounting with Bracket (3.8) .150 (1.7) Typ .067 (2 ...

Page 6

... Ultra-Miniature Process Sealed SMT Pushbuttons Stick-Tube S for Upright Mount 50 pieces per stick Switches must be ordered in 50-piece increments when stick-tube packaging is selected. Each tape-reel of 550 pockets contains 500 switches. Minimum Leader Length: 7.87” (200mm) Minimum Trailer Length: 1.97” (50mm) (13.0) Dia ...

Related keywords