B13JJPCF-RO NKK Switches, B13JJPCF-RO Datasheet

Toggle Switches SPDT ON-OFF-ON 0.4VA

B13JJPCF-RO

Manufacturer Part Number
B13JJPCF-RO
Description
Toggle Switches SPDT ON-OFF-ON 0.4VA
Manufacturer
NKK Switches
Series
Br
Datasheet

Specifications of B13JJPCF-RO

Contact Form
SPDT
Switch Function
ON - OFF - ON
Contact Rating
0.4 Volt-Amp at 28 Volts
Termination Style
Straight PC
Mounting Style
Through Hole
Terminal Seal
Epoxy
Contact Plating
Gold
Actuator
Bat
Illumination Color
Red, Green
Voltage Rating Ac
28 Volts
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
633-B13JJPCF B-13CCPRM B13JJPCF
A
General
Series B
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
Operating Temperature Range:
PCB Processing
Standards & Certifications
A20
Nominal Operating Force:
Insulation Resistance:
Stationary Contacts:
Contact Resistance:
Dielectric Strength:
Movable Contact:
Bushing Housing:
Support Bracket:
Mechanical Life:
Angle of Throw:
Contact Timing:
Case Housing:
Electrical Life:
Logic Level:
Soldering:
Terminals:
Vibration:
Humidity:
Cleaning:
Actuator:
Shock:
Specifications
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
50 milliohms maximum
500 megohms minimum @ 500V DC
500V AC minimum for 1 minute minimum
100,000 operations minimum
50,000 operations minimum
1.18N
Nonshorting (break-before-make)
26°
Polyamide
Polyamide
Glass fiber reinforced polyamide
Phosphor bronze with tin plating
Phosphor bronze with gold plating
Brass with tin plating
Brass with gold plating
–25°C through +55°C (–13°F through +131°F)
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 5 minutes; 3 right angled directions for 2 hours
50G (490m/s
Wave Soldering recommended. See Profile A in Supplement section.
Manual Soldering: See Profile A in Supplement section.
Automated alcohol based cleaning recommended, 5 minutes maximum. Do not use high-purity
alcohol (50% alcohol or more) or organic solvent. High alcohol solution can damage clear plastic.
See Cleaning specifications in Supplement section.
The B Series illuminated toggles have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
2
) acceleration (tested in 3 right angled directions, with 5 shocks in each direction)
www.nkk.com
Subminiature Fully Illuminated Toggles

Related parts for B13JJPCF-RO

B13JJPCF-RO Summary of contents

Page 1

... See Cleaning specifications in Supplement section. Standards & Certifications The B Series illuminated toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. ...

Page 2

... Subminiature Fully Illuminated Toggles Distinctive Characteristics LED provides maximum illumination to bushing and actuator, indicating actuator status in highly visible green, red, or amber for single color or red/green for bicolor. (Patent pending.) Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning ...

Page 3

... Series Poles Circuits 1 SPDT 2 ON NONE Combines with single color or bicolor LEDs 3 ON Combines with bicolor LED only Clear Toggle & Bushing Toggle Position Up Center Pole Model Throw Slot B12 ON NONE SPDT B13 ON OFF J Clear Toggle (6.3) .248 (3.5) .138 A22 ...

Page 4

... Subminiature Fully Illuminated Toggles LEDs are an integral part of the switch and not available separately. The electrical specifications shown are determined at a basic temperature of Forward Peak Current 25°C. If the source volt- age exceeds the rated Continuous Forward Current voltage, a ballast resistor Forward Voltage is required ...

Related keywords