PCA-116 Series Economy Gage Heads
Cost-Effective Performance for ±0.10 to ±0.30 Range Measurement
family of gage heads was
developed for less demanding applications where a
balance between cost and performance is
PCA-116 gage heads incorporate a standardized
LVDT with repeatability better than 0.0001" (0.0025
mm) and linearity within 0.5% of full range output.
The probe shaft is externally sprung and is carried
on low friction nylon sleeve bearings. The probe to
bearing clearances are designed to minimize
problems should contaminants get into the bore.
Units are supplied with replaceable hardened steel
tips that thread to the probe with a 4-48 UNF-2
thread. Replacement or alternate tips are available
(see page 100). Any 4-48 AGD dial indicator contact
tip can also be used.
Cost Effective Performance
Compatible with All Schaevitz
Special Contact Tips
Moderate Cost Units are Ideal for
Less Demanding Applications
Measurement Specialties, Inc.
1000 Lucas Way Hampton, VA 23666 USA
- 1 -
s p e c i f i c a t i o n s
3V rms (nom)
50 Hz to 10 kHz
0.0001" (0.0025 mm)
-65°F to 200°F (-55°C to 95°C)
8 oz (22.6 g)
1 ft (0.3 m) 28 awg PTFE insulated
AISI 400 series stainless steel