D-M9N SMC Corporation, D-M9N Datasheet - Page 95

• Manufacturer Part Number: D-M9N
• Description: Sensor, solid state, direct mount, grommet connection, for MX/MH/CQ2/NCQ2/NCQ8
• Manufacturer: SMC Corporation
• Type: Hall Effectr

Specifications of D-M9N

• Function: Proximity
• Primary Type: Proximity
• Technology: Hall Effect

Rod Mounting Type 1
∗ Equivalent inch size.
Mounting and Moving Method of D-P3DW„ (3)
q Insert the protrusion on the bottom of the auto switch into the
w Install the mounting bracket on which the auto switch is mounted to
e After checking the detecting position, fix the auto switch mounting
r If the detecting position is changed, go back to step w).
Note 1) When tightening the cone points of hexagon socket head cap screw (M4 x
Note 2) The torque for tightening the hexagon socket head cap screw (M2.5 x 9
Note 3) Tighten the hexagon socket head cap screws evenly.
Auto Switch Mounting Bracket Part No. for CK Series
(Including Bracket and Screws)
Auto Switch Mounting Bracket Part No. for CA Series
(Including Bracket and Screws)
Clamp cylinder
Clamp cylinder with lock
Air cylinder
Air cylinder with lock
∗ Equivalent inch size.
∗ Equivalent inch size.
CKG1
CLK2G
Series
Series
CDA2
CDNA
mating part of the mounting bracket and fix the auto switch by
tightening the hexagon socket head cap screw (M2.5 x 9 L).
the switch mounting rod, and move it to find the detecting position
while keeping firm contact between the bottom of the auto switch
mounting bracket and the cylinder tube.
bracket to the detecting position with the cone points of hexagon
socket head cap screw (M4 x 8 L).
8 L), keep the tightening torque within 8.85 to 10.6 in-lb.
L) is 1.77 to 2.66 in-lb.
Hexagon socket head cap screw
(M2.5 x 9 L)
Auto switch mounting bracket
40 (1.58) ∗ 50 (1.97) ∗ 63 (2.48) ∗ 80 (3.15) ∗
BMB8-050S
40 (1.58) ∗
BMB8-0„„S
Switch mounting rod
Applicable cylinder/actuator
CKG1
CLK2G
MDB
CDA2
MDNB
CDNA
Note)
BMB8-050S
BA7T-063S
50 (1.97) ∗
Bore size
Bore size
ø40 to ø63 (ø1.58 to ø2.48) ∗
ø40 to ø63 (ø1.58 to ø2.48) ∗
ø32 to ø63 (ø1.26 to ø2.48) ∗
ø32 to ø63 (ø1.26 to ø2.48) ∗
2-Color Display Solid State Auto Switch
ø40, ø50 (ø1.58, ø1.97) ∗
ø40, ø50 (ø1.58, ø1.97) ∗
Note) When the auto switch mounting
bracket is ordered by its part
number, it includes the bracket
and screws in the dashed line.
Auto switch
Cone points of hexagon
socket head cap screw
(M4 x 8 L)
Convex part
100 (3.94) ∗
BA7T-080S
63 (2.48) ∗
Magnetic Field Resistant
Rod Mounting Type 2
∗ Equivalent inch size.
Mounting and Moving Method of D-P3DW„ (4)
q Install the auto switch mounting bracket 2 to the tie-rod, and fix it
w Insert the protrusion on the bottom of the auto switch into the mating
e Insert the temporarily tightened mounting bracket 1 to the mating
r If the detecting position is changed, go back to step q or e).
Note 1) Ensure that the auto switch is covered with the mating groove by a
Note 2) When tightening the cone points of hexagon socket head cap screw (M4 x
Note 3) The torque for tightening the hexagon socket head cap screw (M2.5 x
Note 4) Tighten the hexagon socket head cap screws evenly.
Auto Switch Mounting Bracket Part No. for MB Series
(Including Bracket and Screws)
∗ Equivalent inch size.
Note) Differences in color and glossiness of the metal surface treatment do not
MDB
MDNB (1.26 to 3.94)
Air cylinder
Air cylinder with lock
Auto switch mounting bracket 2
to the approximate mounting position with the cone points of
hexagon socket head cap screw (M4 x 8 L) while keeping firm
contact between the bottom of the auto switch mounting bracket 2
and the cylinder tube.
part of the auto switch mounting bracket 1 and fix the auto switch and
the auto switch mounting bracket 1 temporarily by tightening the
hexagon socket head cap screw (M2.5 x 9 L) 1 to 2 turns.
groove of the mounting bracket 2, and fix the auto switch by
tightening the hexagon socket head cap screw (M2.5 x 6 L and
M2.5 x 9 L) after checking the detecting position.
Cone points of hexagon
socket head cap screw
(M4 x 8 L)
Hexagon socket head cap screw
(M2.5 x 9 L)
Series
affect the performance. Due to the characteristics of the chromate
treatment (trivalent) applied to the whole body of the auto switch mounting
bracket, the color may be slightly different between manufacturing lots.
However, this will not reduce the corrosion resistance.
minimum of 0.59 inch to protect the auto switch.
8 L), keep the tightening torque within 8.85 to 10.6 in-lb.
6 L, M2.5 x 9 L) is 1.77 to 2.66 in-lb.
BA7T-0„„S
(1.26) ∗
BMB8-032S
32
Applicable cylinder/actuator
Note)
Series
(1.58) ∗
40
MDB
CDA2
MDNB
CDNA
(1.97) ∗
BMB8-050S
50
ø80 to ø125 (ø3.15 to ø4.92) ∗
ø63 to ø100 (ø2.48 to ø3.94) ∗
ø80 to ø100 (ø3.15 to ø3.94) ∗
ø63 to ø100 (ø2.48 to ø3.94) ∗
(2.48) ∗
63
D-P3DW „
Bore size
Tie-rod
Note) When the auto switch mounting
Auto switch mounting
bracket 1
(3.15) ∗
Convex part
BA7T-063S
bracket is ordered by its part
number, it includes the bracket
and screws in the dashed line.
Hexagon socket
head cap screw
(M2.5 x 6 L)
80
Auto switch
(3.94) ∗
100
BA7T-080S
(4.92) ∗
125
8