A-20GV-B7-K Omron Automation, A-20GV-B7-K Datasheet

no-image

A-20GV-B7-K

Manufacturer Part Number
A-20GV-B7-K
Description
SWITCH, 20 AMP, HEAVY DUTY SWITCH, HINGE LEVER
Manufacturer
Omron Automation
Type
Basicr
Datasheet

Specifications of A-20GV-B7-K

Actuator Type
Lever
Brand/series
A-20 Series
Contact Form
SPDT
Current, Rating
20 A
Number Of Poles
1
Operating Force
2.47 Oz.
Operation
Snap Action
Standards
UL Listed, CSA Certified
Temperature, Operating
-25 to +80 °C
Termination
Screw
Voltage, Rating
250 VAC
Lead Free Status / Rohs Status
RoHS Compliant part
General-purpose Snap Action Switch
• High-capacity switch capable of handling 20 A loads with
• Directly switches such loads as motors, halogen lamps and
• Same shape as OMRON snap action switch model Z
Ordering Information
Model Number Legend
Actuator
Pin plunger
Short spring plunger
Panel mount plunger
Panel mount roller plunger
Panel mount cross roller plunger
Short hinge lever
Hinge lever
Short hinge roller lever
Hinge roller lever
large inrush currents
solenoids
except in pin plunger position, yet endures inrush currents
as large as 75 A.
Snap Action Switch
A
A - 20 G
1. Ratings
2. Contact Gap
1
20: 20 A (250 VAC)
G: 0.5 mm
2
3
-
4
3. Actuator
Terminal
V:
V2:
V21:
V22:
None: Pin plunger
D:
Q:
Q21: Panel mount cross roller plunger
Q22: Panel mount roller plunger
Short spring plunger
Panel mount plunger
Hinge lever
Hinge roller lever
Short hinge lever
Short hinge roller lever
Solder terminal
A-20GQ22
A-20GV21
A-20GV22
A-20GV2
A-20GD
A-20GQ
A-20GV
Model
A-20G
---
Snap Action Switch
4. Terminals
None: Solder terminal
B:
Screw terminal (-B)
A-20GQ22-B
A-20GQ21-B
A-20GV21-B
A-20GV22-B
(with toothed washer)
Screw terminal
A-20GV2-B
A-20GD-B
A-20GQ-B
A-20GV-B
A-20G-B
Model
A
19

Related parts for A-20GV-B7-K

A-20GV-B7-K Summary of contents

Page 1

... Snap Action Switch A General-purpose Snap Action Switch • High-capacity switch capable of handling 20 A loads with large inrush currents • Directly switches such loads as motors, halogen lamps and solenoids • Same shape as OMRON snap action switch model Z except in pin plunger position, yet endures inrush currents as large ...

Page 2

... MΩ min. (at 500 VDC) 1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity 2,000 VAC, 50/60 Hz for 1 min between the current-carrying metal parts and the ground, and between each terminal and non-current-carrying metal parts Hz, 1.5-mm double amplitude (See note 2) ...

Page 3

... M4 25.4±0.1 Note: Mount using either the side mounting holes or the panel mount plunger, not both. If using the side mounting holes, then remove the hexagonal nut(s) from the panel mount plunger. Accessories (Terminal Covers, and Separators): Refer to ‘Z/A/X/DZ Common Accessories’ datasheet ■ ...

Page 4

... Note: 1. All drawings show the switches with screw terminals. For solder terminals, remove the “-B” from the end of the part number 2. Unless otherwise specified, all units are in millimeters and a tolerance of ± 0.4 mm applies to all dimensions. Pin Plunger A-20G-B Short Spring Plunger ...

Page 5

... Note: 1. All drawings show the switches with screw terminals. For solder terminals, remove the “-B” from the end of the part number 2. Unless otherwise specified, all units are in millimeters and a tolerance of ± 0.4 mm applies to all dimensions. Short Hinge Lever A-20GV21-B Hinge Lever ...

Page 6

... Safety Precautions Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide, “Snap Action Switches, Technical Information” for correct use. Precautions for Safe Use Terminal Connection When soldering lead wires to the Switch, make sure that the capacity of the soldering iron maximum ...

Page 7

... Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller: (a) All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Products until the full purchase price is paid by Buyer ...

Page 8

... Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONIC COMPONENTS LLC 55 E ...

Related keywords