MSO-0008P-012 NCC, MSO-0008P-012 Datasheet - Page 78

• Manufacturer Part Number: MSO-0008P-012
• Description: Socket, Relay; 8 Pin Octal
• Manufacturer: NCC
• Type: Octalr

Specifications of MSO-0008P-012

• Number Of Contacts: 8
• Time Range: 0.05 Sec. to 999 Min.
• Output Rating: 10 A @ 240 VAC Max.; 100 mA @ 5 VDC Min.
• Operating Temperature: –23°C to +55°C

AMETEK National Controls Corp. • 1725 Western Drive • West Chicago, Illinois 60185 • Tel: [phone] • 630-231-5900 • FAX: [phone] • www.nationalcontrols.com
4-6
DC Input, Pulse Cleaning of Bag House
Dust Collectors
Model DNC-T2010-ADC
FEATURES
●
●
●
●
●
●
●
●
●
●
●
Operating Logic: The control can function
in 2 modes.
terminals are shorted. Upon application of
output voltage, the control activates output
#1 after the preset off time. It will continue
to activate outputs sequentially until input
voltage is removed.
terminals are connected to an isolated set
of contacts of a differential pressure switch.
The control will activate the outputs sequen-
tially whenever the pressure switch contacts
are closed. When the pressure switch con-
tacts open, the output sequencing stops.
Re-closing of the contacts will cause the
control to resume activating the outputs.
Program wire allows the user to select the
maximum number of outputs to be acti-
vated.
Note: Controls are shipped with jumper across pressure switch
terminals.
In Continuous Mode, the pressure switch
In On Demand Mode, the pressure switch
Field selectable from 2 to 10 outputs
Solid state timing and switching logic
300% overrated solid state switch
Pressure switch control option on board
12 to 24 VDC input voltage
Adjustable ON and OFF times
High quality locking bushing
potentiometers for timing adjustment
Very low power consumption
Conformally coated for protection
against vibration, humidity, and con-
tamination
LEDs show compartment being cleaned
Metal chassis provided for mounting
directly into NEMA 4 enclosure
DUST COLLECTOR CONTROLS
SPECIFICATIONS
TIME SETTING RANGES
ON-Time: Adjustable from 20 to 200 ms
OFF-Time: Adjustable from 1.5 to 60 sec.
Repeatability: ±3% over temperature and volt-
age ranges
INPUT
Operating Voltage: 10.0 to 29.0 VDC (unfiltered
supply voltage must be full-wave rectified)
Power Consumption Voltage During Off Time:
1.5 W at 12 VDC, 4.2 W at 24 VDC
OUTPUT
Type: Solid state switch
Load Per Output: 3 A max. at 1.5 V less than
input voltage
PROTECTION
Transient Input Voltage: Metal oxide varistor
plus large filter capacity
Transient Output Voltage: Solid state switch
rated at 10 A to 60 V fly-back diode protected
Short Circuit Protection: 3 A fuse for circuit,
reverse polarity protected
ENVIRONMENTAL
Operating Temperature: -40°F to 150°F (-40°C
to 65°C)
Storage Temperature: -40°F to 185°F (-40°C to
85°C)